Re: [WISPA] Promotion

Think he is saying that the tower does not have wireless service to it. He is looking to have a page that he can get calls on, then, when there is enough interest he will worry about getting net to it ;) * --- Dennis Burgess, CCNA, A+, Mi

Re: [WISPA] Test - Ignore please

so ignored. * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member* *Office*: 314-735-0270 *Website*: ht

Re: [WISPA] is this router overloaded?

unltil it his 100% and stays there, its not overloaded hahahaha . * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WIS

Re: [WISPA] is this router overloaded?

Part of the 5.2 band. All of the radar patters are in MT, just not certified. * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Suppo

Re: [WISPA] DFS Radar Question

You could also use http://www.linktechs.net/speca.asp. This you can plug into a PC and log without issues as well. There is also some recording in the hand held too. Advantage of this is that it does 10mhz to 6GHz . At least its less than 3k! * --

Re: [WISPA] is this router overloaded?

gt; / Eje > > -----Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Dennis Burgess - LTI > Sent: Monday, April 20, 2009 3:32 PM > To: WISPA General List > S

Re: [WISPA] is this router overloaded?

This woudl be better, as you have a metal indoor case around it. * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WIS

Re: [WISPA] DFS Radar Question

They do have all of the radar patterns in it. However, I don't think they have went down the path to get certified. * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Techn

Re: [WISPA] DFS Radar Question

tended recipient(s) is prohibited, If you received this in error, please contact the sender and delete the material from any computer. Josh Luthman wrote: > In other words the functionality is there but the paper that says it > can does not exist? > > On 4/22/09, Dennis Burgess - LTI

Re: [WISPA] using multiple 5.3 cards in a Mikrotik

t; And 5.2 is not allowed for outdoor usage. So Franks unit is an indoor unit >> > > >> I >> would suspect he is suffering from multipath reflections. >> >> Besides on the radar stuff.. The way DFS is designed in MT it will never >> be >> able to get certi

Re: [WISPA] router to load balance 2 wan connections

RouterOS RB1000 will handle that, maybe even a 493AH :) * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor

Re: [WISPA] router to load balance 2 wan connections

Been doing it wrong. I did a university with 24 DSL connections :( Took a while, works great. * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikr

Re: [WISPA] router to load balance 2 wan connections

even simpler.. * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member* *Office*: 314-735-0270 *Website*:

Re: [WISPA] Mikrotik question

Why you take a RouterOS class :) But regardless, if you ahve a MT client, it will set the TX and RX speeds for the clients by default. YOu can set that by MAC as well, so you can control the bandwidth from the AP to the CPE. * --- Dennis

Re: [WISPA] Mikrotik question

AP TX rate works on any client, but you have to have MT for the client TX rate .. :) * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP

Re: [WISPA] 802.11 a, b, g "booster"

RouterOS. We can ship it configured to connect to your AP and rebroadcast :) This is the simplest way. We can do this with MESH setups, routed or bridged :) * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member -

Re: [WISPA] RB333/433 eliminating self-interference test

YOu getting good prices on that? * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member* *Office*: 314-

Re: [WISPA] Free Radius Servers

User Manager ;) * --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member* *Office*: 314-735-0270 *Website*

Re: [WISPA] What is this?

A 16 Port KVM with IP access :) You shuld be able to hook 16 servers up, and use a web page, or other IP connection to connect to it :) --- Dennis Burgess, Mikrotik Certified Trainer Link Technologies, Inc -- Mikrotik & WISP Support Servic