I have rolled out MPLS on about 4 hops on my network with anticipation of
expanding that to all towers once the concept proves itself in this small
section on the network.
I'm having issue getting traffic to pass through VPLS tunnel in real life.
In the lab it works, when we played with it in t
-
From: "Scott Carullo"
To:
Subject: [WISPA] Mikrotik MPLS voodoo
Date: Sat, Jul 13, 2013 21:03
I have rolled out MPLS on about 4 hops on my network with anticipation of
expanding that to all towers once the concept proves itself in this small
section on the network.
I'm havin
Scott Carullo" , wireless@wispa.org
Subject: Re: [WISPA] Mikrotik MPLS voodoo
First stage would be to check the basics. Can both ends of the VPLS tunnel
ping each other? Are all interfaces between end points exchanging LDP?
Assuming this is all good I suspect an MTU issue so have you got any
Watch for MTU issues
Sent from my Motorola Startac...
On Jul 13, 2013, at 4:05 PM, "Scott Carullo"
mailto:sc...@brevardwireless.com>> wrote:
I have rolled out MPLS on about 4 hops on my network with anticipation of
expanding that to all towers once the concept proves itself in this small
sec
dwireless.com>>,
wireless@wispa.org<mailto:wireless@wispa.org>
Subject: Re: [WISPA] Mikrotik MPLS voodoo
First stage would be to check the basics. Can both ends of the VPLS tunnel ping
each other? Are all interfaces between end points exchanging LDP? Assuming this
is all good I suspect
nical Operations
855-FLSPEED x102
From: "Gino Villarini"
Sent: Saturday, July 13, 2013 5:44 PM
To: "" , "WISPA
General List"
Cc: "Paul Hendry" , "Scott Carullo"
, "wireless@wispa.org"
Subject:
turday, July 13, 2013 4:24 PM
To: "Scott Carullo" , wireless@wispa.org
Subject: Re: [WISPA] Mikrotik MPLS voodoo
First stage would be to check the basics. Can both ends of the VPLS tunnel ping
each other? Are all interfaces between end points exchanging LDP? Assuming this
is all
uters (mikrotik devices prior to
> hand-off to customer), what is the maximum size packet you can send
> successfully, with df bit set?
>
> P.
>
>
> - Reply message -
> From: "Scott Carullo"
> To: "Paul Hendry" , "Scott Carullo" <
&g