James,
>From this documentation:
http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/gu
ide/c40sol.html#wp1086421
"The VLAN feature only supports MAC filtering, 802.1X, and WPA. The VLAN
feature does not support Web Authentication or IPSec"
That might be the issue for you.
Den
Hi Dennis,
Yes there is a "np8ss0" dynamic i/f. I have tried combinations of
just the VLAN type attributes and just the airespace attributes and
with both - no joy with either.
-James
On 22 Oct 2007, at 22:35, Dennis Xu wrote:
James,
The client should be moved to the vlan specified in
James,
The client should be moved to the vlan specified in "Airespace /
Interface-Name" attribute, not "Tunnel-Group-ID". Do you have a dynamic
interface called "np8ss0" in your WLC?
Dennis Xu
Network Analyst(CCS)
University of Guelph
5198244120 x 56217
-Original Message-
From: James J
> Do any of the Aruba customers know what the limitation of client connections
> per controller is? How does this number compare to the number of AP's that
> can be supported by a single controller?
Aruba supports a maximum of 256 users per AP, but the default config is
64. We decided on a densit
Do any of the Aruba customers know what the limitation of client connections
per controller is? How does this number compare to the number of AP's that
can be supported by a single controller?
Philippe,
When planning for AP density in your dorm wireless networks, do these
metrics come into play?
If anyone ever encounters this problem, it turns out that the APs were
defective.
___
___
Fishel Erps
Sr. Network Infrastructure Engineer
School of Visual Arts
Work LL: 212-592-2416
Work Cell: 646-201-2766
Fax: 212-592-2243
E
Hi All,
We have the Cisco WISM solution up and running. I have set up a new WLAN
SSID with web based auth. I now want to put the users in different VLANs
depending on who they are using the RADIUS reply. I have ticked the 'Allow
AAA Override' box and i'm sending back the following RADIUS attri
The specific problem we're having is that an AP, placed in an area is
showing lower signal levels for our Guest ssid as compared to our regular
ssid. Both ssid's are coming from the same AP, the same radio even
(obviously, same channel as well). It's causing problems for guests as they
are not gett