On 07/16/2017 03:24 PM, Bill Somerville wrote:
Hi Bill,
Now that rc2 is available for general testing, is it a good idea to
return to the ^/branches/wsjtx branch ?
Best wishes,
Claude (DJ0OT)
> If you are using raw subversion commands then:
>
> $ svn switch ^/branches/wsjtx-1.8
>
> will swap
I had an issue where, after upgrading from 1.8.0-rc1 to 1.8.0-rc2, no
receiver output was shown in the Wide Graph and no signals (e.g., FT8
or JT65) were decoded. It turned out that WSJT-X.ini had a UseRef=true
line in the [WideGraph] section. Changing it to false fixed the issue.
For me, this is
On 03/09/2017 21:24, Pino Zollo wrote:
201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is.
Isn't it in Antarctica ?
Hi Pino,
have you checked where the S. Shetland Islands are? They are not off the
coast of Scotland, hi hi.
73
Bill
G4WJS.
---
On 03/09/2017 19:48, Michael Tharp wrote:
On 09/03/2017 02:07 PM, Bill Somerville wrote:
I am pushing back on this patch because `git svn info` does not take
any arguments on my version of git-svn and I am surprised yours does.
I can reproduce your failure on a Linux system using a subdirectory
https://en.wikipedia.org/wiki/Bellingshausen_Station
On Sun, Sep 3, 2017 at 11:44 PM, KQ5S-Tom wrote:
> No according to QRZ.COM:
>
> RI1ANO [image: South Shetland Islands flag] South Shetland Islands
> Alexandr A. Ushakov, UA1OJL
> Bellingshausen Base
> King George Island
> South Shetland Island
ok
Sent from my iPhone
> On Sep 3, 2017, at 14:17, Tom Melvin wrote:
>
> There is a setting - General Tab - 'Show DXCC entity and if worked before'
>
> You have this ticked - the system will add the DXCC entity name at the end of
> the line -
>
> Regards
>
> Tom
> GM8MJV
>
>
>> On 3 Sep 2
No according to QRZ.COM:
RI1ANO South Shetland Islands
Alexandr A. Ushakov, UA1OJL
Bellingshausen Base
King George Island
South Shetland Islands
-
Tom - KQ5S
> On Sep 3, 2017, at 3:24 PM, Pino Zollo wrote:
>
>
> 1.8 RC2
> 201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is.
>
> Isn't
1.8 RC2
201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is.
Isn't it in Antarctica ?
73 de
Pino ZP4KFX
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm
There is a setting - General Tab - 'Show DXCC entity and if worked before'
You have this ticked - the system will add the DXCC entity name at the end of
the line -
Regards
Tom
GM8MJV
On 3 Sep 2017, at 20:00, ke0bkm wrote:
> i did not make my self clear
>
> the Tilde (~) and the exclamation
Title: Re: [wsjt-devel] special charcheters
Hello David,
Sunday, September 3, 2017, 9:00:31 PM, KE0BKM wrote:
> i did not make my self clear
> the Tilde (~) and the exclamation point (!) and the country are what i am talking about.
> where do i add these I have tried using the macros but i can
i did not make my self clear
the Tilde (~) and the exclamation point (!) and the country are what i am
talking about.
where do i add these I have tried using the macros but i can not add the
special characters
Sent from my iPhone
> On Sep 3, 2017, at 13:36, Wolfgang wrote:
>
> Hello David
On 09/03/2017 02:07 PM, Bill Somerville wrote:
I am pushing back on this patch because `git svn info` does not take any
arguments on my version of git-svn and I am surprised yours does. I can
reproduce your failure on a Linux system using a subdirectory of the
source tree as a build tree. I thi
> On Sep 3, 2017, at 7:54 AM, George J Molnar wrote:
>
> Right - that’s not happening with the main window. I can move it in one
> configuration, and upon return to that configuration, it its back at the
> default position. The fast graph “sticks” where I move it, though.
As you know, George,
Hello David,
how about searching in the online manual and finding 'Logging' ?
! Default color bright purple: New DXCC entity
~ Light pink: You have already worked this DXCC entity but not this station
73 de Wolfgang
OE1MWW
Sunday, September 3, 2017, 8:20:53 PM, you wrote:
> in the decode wi
in the decode window i see something like
CQ KE0BKM EM27 ~U.S.A.
OR
CQ KE0BKM EM27 !U.S.A.
i have searched and searched on what it means and how to send it but to no
avail.
David
KE0BKM
Sent from my iPhone
-
On 09/03/2017 01:27 PM, Bill Somerville wrote:
ok, I'm still confused. Can you try this and tell me if it works without
your proposed patch, note the build tree is not a sub-directory of the
source tree:
mkdir ~/build-wsjtx
cd ~/build-wsjtx
cmake
make
please? If it doesn't work and causes th
On 03/09/2017 18:27, Bill Somerville wrote:
On 03/09/2017 18:22, Michael Tharp wrote:
On 09/03/2017 10:44 AM, Bill Somerville wrote:
I'm not sure I understand the issue that this patch fixes? What
does "alternate builddir" mean? I build WSJT-X "out of source" from
a git-svn repo every day, man
On 03/09/2017 18:22, Michael Tharp wrote:
On 09/03/2017 10:44 AM, Bill Somerville wrote:
I'm not sure I understand the issue that this patch fixes? What does
"alternate builddir" mean? I build WSJT-X "out of source" from a
git-svn repo every day, many times, and it works fine for me.
Meaning
On 09/03/2017 10:44 AM, Bill Somerville wrote:
I'm not sure I understand the issue that this patch fixes? What does
"alternate builddir" mean? I build WSJT-X "out of source" from a
git-svn repo every day, many times, and it works fine for me.
Meaning you build from a subdirectory (or somewhere
When the box for "Blank line between decoding periods" at the
File/Settings/General tab is checked, while using the FT8 mode, is there any
reason why four 15 second segments must pass before the band is displayed on
the right side of the line?
Was the original intent to wait for one 60 second
Hi George and Bill,
I just checked this on a 10.11 system and on a 10.12 system. I can’t reproduce
the behavior here either.
Steve k9an
> On Sep 3, 2017, at 9:24 AM, George J Molnar wrote:
>
> Thanks for checking, Bill - using the official build dmg.
>
>
> George J Molnar
> Nevada, USA
>
On 03/09/2017 15:34, Bill Somerville wrote:
On 03/09/2017 15:26, Michael Tharp wrote:
Just a quick patch to the cmake modules. If you build from a git-svn
checkout, it tries to call "git svn info" to get the revision but it
doesn't work if you're building from an alternate builddir. The
attach
Afternoon
This may be a known issue but just in case …
Spotted this jumping around on 6m the status of the TX=RX locked box not
preserved.
OS: Windows 7
Pgm: WSJTX RC2
How to reproduce:
Start up system, in my case defaults to 50.313 FT8, lock TX=RX TICKED - as
expected
Select Mode -
On 03/09/2017 15:26, Michael Tharp wrote:
Just a quick patch to the cmake modules. If you build from a git-svn
checkout, it tries to call "git svn info" to get the revision but it
doesn't work if you're building from an alternate builddir. The
attached patch fixes that.
Hi Mike,
I'm not su
Hi all,
Just a quick patch to the cmake modules. If you build from a git-svn
checkout, it tries to call "git svn info" to get the revision but it
doesn't work if you're building from an alternate builddir. The
attached patch fixes that.
-- mike NF4E
diff --git a/CMake/Modules/FindGitSubvers
Thanks for checking, Bill - using the official build dmg.
George J Molnar
Nevada, USA
> On Sep 3, 2017, at 7:22 AM, Bill Somerville wrote:
>
> Hi George,
>
> I am not able to reproduce that issue on my OS X 10.11.6 development system.
> Are you using the officially release RC2 installe
Hi George,
I am not able to reproduce that issue on my OS X 10.11.6 development
system. Are you using the officially release RC2 installer DMG or a self
built version?
Any other Mac users seeing this issue? If so please chip in with your
o/s version.
73
Bill
G4WJS.
On 03/09/2017 14:54, Ge
rr Bill, funny, just got done responding to his CQ for a quick 1000+mi qso.
so tnx Steve for your work as well
On Sun, Sep 3, 2017 at 9:49 AM, Bill Somerville
wrote:
> On 02/09/2017 23:13, Chuck Yahrling wrote:
>
>> Just installed 1.8.0 rc2 on 3 different machines; XP (hamfest freebie
>> Em
Right - that’s not happening with the main window. I can move it in one
configuration, and upon return to that configuration, it its back at the
default position. The fast graph “sticks” where I move it, though.
George J Molnar
Nevada, USA
> On Sep 3, 2017, at 6:51 AM, Bill Somerville w
On 03/09/2017 14:43, George J Molnar wrote:
The main window may be positioned anywhere on the screen, but returns
to the top left when a different Configuration is changed. The
waterfall/fast graph retains positioning, however.
Hi George,
the WSJT-X configurations each have a completely separ
On 02/09/2017 23:13, Chuck Yahrling wrote:
Just installed 1.8.0 rc2 on 3 different machines; XP (hamfest freebie
Emachine 0.5GB Ram), Win7 (dell dual core 3.0gbs and 4GB ram) and
fresh win10 pro (Asus Athlon64 dual core 2.7gbs/4GB ram) .
All three are decoding FT8 with no CAT or PTT quirks.
Running RC2 (8069) under MacOS 10.13 (beta).
The main window may be positioned anywhere on the screen, but returns to the
top left when a different Configuration is changed. The waterfall/fast graph
retains positioning, however.
Steps to Duplicate:
Launch WSJTX
Select a Configuration
Move main
Thanks Mike. Worked like a charm.
Ernie KC4SIT
On Sun, Sep 3, 2017 at 9:35 AM, Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> This is an FAQ now...means you were using one of the other development
> version which had a bug.
>
> Settings/Frequencies right-click in Frequ
This is an FAQ now...means you were using one of the other development version
which had a bug.
Settings/Frequencies right-click in Frequencies and Reset.
de Mike W9MDB
On Sunday, September 3, 2017 8:31 AM, Ernie Hollingsworth
wrote:
I just updated WSJT-X to the rc2 build. Did not fin
I just updated WSJT-X to the rc2 build. Did not find any frequencies under
the Settings>Frequencies tab. Has anyone else experienced this issue?
Downloaded from Source Forge.Thanks
Ernie KC4SIT
--
Check out the vibrant tec
- Original Message -
> Hi,
>
> two more problems which have been spotted during the WSJT-X package
> Fedora review [1] and I think it's worth to report upstream:
>
> - GUIcontrols.txt, prefixes.txt, wsjtx_changelog.txt all have CR + LF
> line endings
> - jt9 binary has executable stack
On 03/09/2017 11:24, Richard Lamont wrote:
That reminds me. When running (r8067 under Ubuntu MATE 16.04) there
seems to be a second process called jt9. Is this right? I haven't used
the mode jt9 for over two months.
Hi Richard,
yes that is correct. The name of the executable is confusing, I be
On 03/09/17 10:54, Jaroslav Skarvada wrote:
> two more problems which have been spotted during the WSJT-X package
> Fedora review [1] and I think it's worth to report upstream:
>
> - jt9 binary has executable stack
That reminds me. When running (r8067 under Ubuntu MATE 16.04) there
seems to be a
Hi,
two more problems which have been spotted during the WSJT-X package
Fedora review [1] and I think it's worth to report upstream:
- GUIcontrols.txt, prefixes.txt, wsjtx_changelog.txt all have CR + LF
line endings
- jt9 binary has executable stack
73! Jaroslav, OK2JRQ
[1] https://bugzilla.red
Thanks Bill,
I had been using r8060 before changing to RC2. I wasn't on 6m at any time
after changing to RC2 and can remember asking WSJT-X to go to 6m for the first
time on RC2. At that point, my grandkids arrived and I didn't look to see that
the rig had actually changed frequency.
When I go
40 matches
Mail list logo
