Hi All,
Sometimes, I have seen a strange signal on the air, in the usual FT8
"sub band". There are 8 tones in a bandwidth of 100 Hz and a TX duration
of 15 s. Is this a CLOVER signal or anything else ?
Best wishes,
Claude (DJ0OT)
--
Den 30.07.2018 15:15, skrev Richard PD1BHZ:
Hi all,
I just buy a new radio Yaesu ftdx 3000 but see a little problem.. don’t
now if it’s my fault 😉 If I switch the band in wsjtx 1.9.1 software
from say 20mtr to 40mtr my antenna is not switch from ant1 to ant2.
If I push the band button on the
That's harmonics. If it's 100Hz wide it's the 2nd harmonic, 150Hz wide it's
the 3rd,.
Been seeing them a lot and you can divide the starting offset by 2 or 3 as
appropriate and find out who's doing it.
Quite a few ops overdriving their audio. Been more of them since Baker Island
with the o
Claude,
That sounds a lot like a dirty FT8 signal that has second (and possibly higher)
harmonics.
I have a screenshot of a signal with seven (yes 7) higher order harmonics.
> On Jul 31, 2018, at 06:07, Claude Frantz wrote:
>
> Hi All,
>
> Sometimes, I have seen a strange signal on the air
Zac,
*1)* your favourite search engine is your friend, if only one knew in
advance likely search terms!
*2)* there *is* a UDP comms mechanism built in to WSJT-X. The
description is in the WSJT-X manual (chapter 14), and the specific data
types are defined in this file:
https://sourceforge.n
On 07/31/2018 03:01 PM, Black Michael via wsjt-devel wrote:
> That's harmonics. If it's 100Hz wide it's the 2nd harmonic, 150Hz wide
> it's the 3rd,.
The signals, I have seen, have 8 tones within 100 Hz. Approximatively,
of course, because I report only what I have seen on the waterfall.
The
I have the cat port on my YAESU radio controlled by my N3FJP logging program.
I have the WSJT-X bands programmed into radio memories because the setup for
flat audio and CW audio bandwidth is different. Fast AGC for WSJT is not easy
to listen to on an SSB net. WSJT-X wants the noise blanker and
On 07/31/2018 04:38 PM, Black Michael via wsjt-devel wrote:
Hi Mike & All,
> The signals look clean but they are the result of clipping the signal
> due to overdriving the audio.
> Like this one...3rd harmonic at 2830 or so...offending signal at 940 or
> so...
OK ! We can suspect a clipping, in
On 07/31/2018 04:55 PM, patrick hamel wrote:
Hi Pat & All,
> I have the cat port on my YAESU radio controlled by my N3FJP logging
> program.
Do I understand well that you have both the N3FJP logging program and
WSJT-X communicating with the same CAT port ?
Best wishes,
Claude (DJ0OT)
-
Hi Claude.
I think Mike´s interpretation is correct. Third harmonics are often stronger
than the 2nd, and the variation in signal strength does seem to match the
fundamental (which, BTW, is not the TX/RX selected DF).
I see this quite frequently. A lot of hay is made on the Facebook group and
Actually the noise correlates perfectly with the signal at 940...look
again...the top :45 entry chops off about half way through the interval and the
noise goes with itplus the fact that the math works out perfectly with the
150Hz wide noise being 3*50.
I contacted that op and worked with hi
On 07/31/2018 05:18 PM, Black Michael via wsjt-devel wrote:
Many thanks Mike and George. I confess that I'm surprised. I will
observe these signals further if they occur. It's an interesting matter.
Hi !
Best wishes,
Claude (DJ0OT)
---
I have been thinking about this for some time. Went through the setup again
and things set up different now. Would anyone be willing to give me a call and
take a look at my signal.
Hal W5GHZ 405-974-0760 anytime
Sent from Yahoo Mail. Get the app
On Tuesday, July 31, 2018 10
On 30/07/2018 14:15, Richard PD1BHZ wrote:
Hi all,
I just buy a new radio Yaesu ftdx 3000 but see a little problem..
don’t now if it’s my fault 😉 If I switch the band in wsjtx 1.9.1
software from say 20mtr to 40mtr my antenna is not switch from ant1 to
ant2.
If I push the band button on th
On 31/07/2018 16:07, Claude Frantz wrote:
OK ! We can suspect a clipping, in the audio range, resulting in this
signal at 2830 Hz. But there is no 2nd harmonic at 1880 Hz on this
waterfall. Of course, such a clipping resulting only in odd harmonics is
possible, but it would be surprising to me. F
On 31/07/2018 16:18, Black Michael via wsjt-devel wrote:
Sometimes you see the 2nd and sometimes the 3rd (and once I've seen
the 4th). Depends on how well the rig suppresses the 2nd harmonic.
Hi Mike,
I don't understand how you come to the conclusion that the rig could
suppress a 2nd harmon
Heavy clipping causes (almost a square wave) which produces odd harmonics.
Very light clipping (not so square) may also include some even harmonics. If
you look at the signal with an O-scope, it is easy to see.
Hal W5GHZ
Sent from Yahoo Mail. Get the app
On Tuesday, July 31, 2018
Bill,
The distortion and harmonics are in the audio section, which when over driven
are no longer linear. The harmonics that you are seeing are audio,, not RF.
The RF signal is still linear.
Hal W5GHZ
Sent from Yahoo Mail. Get the app
On Tuesday, July 31, 2018 10:38:09 PM
Claude,
I am sorry that I gave that impression.
WSJT-X runs standalone in one window, and N3FJP runs in the other window and
usually has the CAT port enabled.
Only one of them can access the CAT port.
I'm sorry to distract the developer traffic with user-radio problems and then
mislead people.
I
19 matches
Mail list logo