Perhaps tuning your VFO 200 Hz lower will do the trick? I have adjusted the
frequency tables down 500 Hz and use a 5 kHz filter, and everyone is in the
passband without difficulty.
George J Molnar
College Park, Maryland
KF2TFM19ma
> On Jun 22, 2022, at 8:42 PM, Notko Mermerski via wsjt-dev
Andy,
I have start frequency of Wide Graph at 100Hz, even tried with start at 0Hz Rx
freq. never goes below 200. Same for Tx freq.
Same thing if I enter numeric values in corresponding boxes. Should mention
that I am running FT8/4.
73 Notko/SA5NTK
From: Andrew Neumeier via wsjt-devel [
At first RC1 worked fine.But now it boots up, shows the splash beta
screen, then the TS-2000 beeps, and when I hit Okay, the program quits.I
have no access to the setup screen.
I reloaded the program twice.Same result.2.5.4 runs fine.
_
The 706MKIIG does not do CAT PTT per se but the ptt-type=RTS should work.
Why do you have rst_state=ON? That conflicts with ptt-type=RTS and might be
why it's not working.
And dtr_state=ON would only be needed if your CAT cable needs power from the
computer to work.
Mike W9MDB
On Wednesd
Notko,
Can you not just change the start frequency in the Wide Graph? Mine is set at
100hz.
73,Andy, ka2uqw
On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via
wsjt-devel wrote:
Hi everybody,
I am running WSJT-X 2.5.4.
Noticed that it is impossible to
Hi everybody,
I am running WSJT-X 2.5.4.
Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red
bracket) below 200Hz. I can understand that there is a rationale for this
limit, but modern TRXes are capable of receiving below 200Hz. I am seeing
decoded messages belo
Hi
I'm running WSJT-X v2.5.4 on a Win10 computer.
I've set up hamlib rigctld (version 4.4) on a Raspberry Pi and connected it
to my Icom706mk2g.
I'm using two com ports from the RPi, one for CAT control and one for PTT.
I've set WSJT-X to use hamlib for rig control and pointed it to the
ip:port
So I had the N Avg set to 2 which gave the intermittent displays. Reducing to N
avg to 1 solved the problem. Any N Avg setting above 3 eliminates the time hack
and band label. Guess I’ll leave it at 1…Thanks for your help!
Gary KO3F
> You've got barely enough room to show it -- the height of th
Mike, I have not increased font size from default… Will try N avg change later
and advise…Thanks
> On Jun 22, 2022, at 5:36 AM, Black Michael via wsjt-devel
> wrote:
>
> You've got barely enough room to show it -- the height of the intervals may
> be 1 pixel off or so and make the difference.
