"Do you have split mode turned on?
Does it behave if split mode is turned off?
Mike W9MDB"
Split was "Rig". No obvious difference with Split "None". Hang was not
associated with crossing a 500 Hz boundary.
Wide Graph hang can also be induced if the TX cursor is repeatedly moved within
a 500 H
Could you turn on all the trace options in FLRig and send me the trace.txt
file?And what version of FLRig?
Just turn on the trace options (all of them).
Shut down FLRig, start it, and shut it down as soon as it's done startup.
Mike W9MDB
On Thursday, December 1, 2022 at 11:30:48 AM CST, Lo
Do you have split mode turned on?
Does it behave if split mode is turned off?
Mike W9MDB
On Thursday, December 1, 2022 at 11:12:40 AM CST, Andy Durbin via
wsjt-devel wrote:
WSJT-X ver 2.6.0-rc5 64 bit. Windows 8.1. TS-590S with Omni-Rig.
I frequently slew the TX frequency cursor by
Hello,
Some issues I noticed with RC5 on Mac, specific to using Flrig which owns the
CAT control, WSTJ-X configured to use Flrig (TCP server).
MacOS 12.6.1 (Intel)
Icom IC-7300
1) On start up frequency is not read (shows red/oob)
2) Clicking Test CAT (Radio tab) causes WSTJ-X to display oob/r
WSJT-X ver 2.6.0-rc5 64 bit. Windows 8.1. TS-590S with Omni-Rig.
I frequently slew the TX frequency cursor by clicking on the TX frequency box
and using my mouse wheel. When I do that in 2.6.0-rc5 the wide graph pauses
and may hang for a second. Sometimes the TX cursor has a delayed response t
Hi Rich,
This is a long known problem and no solution in the program found. You may
erase the band activity window at regular intervals and it continues fine or
restore operation. You may erase both displays with the Erase button or click
in the Band activity window and select Erase from the
I began having problems with the previous version yesterday just before
expiration: The program would not decode in Hound Mode FT8.
I tried a version offered by Alex Lelievre, but that crashes immediately upon
opening.
I then went to the last general release. It now crashes as well.
I am run
Using the new WSJT-X Version 2.6.0-rc5, with the Settings, General tab,
"Start new period decodes at top" checkbox checked, as expected, the
display of decoded FT8 spots started fine. Each decoding cycle displayed
properly from the top down. However, within an hour, the top-down display
of spots st
Hi All
I have been playing with the new frequencies table and it looks very useful.
There is one behaviour of WSJT-X that often catches folks out, and I wonder
if its possible to address this as some point.
The behaviour is that when you have tuned to a particular frequency, and
then enter Setti
