Could you turn on all the trace options in FLRig and send me the trace.txt
file?And what version of FLRig?
Just turn on the trace options (all of them).
Shut down FLRig, start it, and shut it down as soon as it's done startup.
Mike W9MDB
On Thursday, December 1, 2022 at 11:30:48 AM CST, Lonney K1LH via
wsjt-devel <[email protected]> wrote:
Hello,
Some issues I noticed with RC5 on Mac, specific to using Flrig which owns the
CAT control, WSTJ-X configured to use Flrig (TCP server).
MacOS 12.6.1 (Intel)
Icom IC-7300
1) On start up frequency is not read (shows red/oob)
2) Clicking Test CAT (Radio tab) causes WSTJ-X to display oob/red (same as
occurs on start up), Test PTT doesnt work. RC5 will TX/RX through an FT8
sequence and complete a QSO as per normal.
3) USB Dial Frequency in WSTJ-X: Displays the fake it split TX frequency (that
would be used) when in receive mode.
4) If moved to non preset frequency and the TX frequency is moved on waterfall,
rig frequency is moved back to nearest preset. Happens in normal and hound mode.
--
General issues/suggestions
5) Adding a new FT8 frequency unchecks the preferred option on any existing
preset in the same band, e.g. have to go back and manually check the preferred
preset.
6) Band drop down list - can the list shown be longer (say 20 frequency shown
vs 10) - so that there is not a scroll bar?
Lonney
K1LH
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
