I may have that backwards Dave.
Bobby
On 8/25/2024 4:56 PM, Bobby Chandler wrote:
Dave,
You can do that already. If you're in the hound mode, clicking on the
FT8 box with left click is regular hound, and right click puts it into
the Super Hound mode. Very handy thanks to to team.
Dave,
You can do that already. If you're in the hound mode, clicking on the
FT8 box with left click is regular hound, and right click puts it into
the Super Hound mode. Very handy thanks to to team.
Bobby/N4AU
On 8/25/2024 4:26 PM, Dave Bernheisel via wsjt-devel wrote:
I have been using WS
Thank you Joe.
Bobby/N4AU
On 5/9/2023 8:15 AM, Joe Taylor via wsjt-devel wrote:
OK folks, Emergency Moderation has been turned on. Please think long
and hard before hitting "Send" on your email client.
-- Joe, K1JT
___
wsjt-devel mailing list
Looks like this hoss has been whupped to death.
Bobby/N4AU
On 5/8/2023 2:30 PM, Jim Brown via wsjt-devel wrote:
On 5/8/2023 10:06 AM, Adrian wrote:
How would you know ? You lack the technical ability..
I'm a Fellow of the Audio Engineering Society, on the basis of a wide
range of technical
Thanks much Joe,
Just didn't want to click on wrong time sequence. Thanks to the team for
a super program and support.
N4AU/Bobby
On 1/7/2023 3:52 PM, Joe Taylor via wsjt-devel wrote:
Hi Bobby,
When in the NORMAL decode mode and band is busy (35 to 50+) the
decode indicator flashes 3 times
Running Ver 2.6.0 on W10.
When in the NORMAL decode mode and band is busy (35 to 50+) the decode
indicator flashes 3 times and the last is several seconds (up to 5) into
next time slot. Does this affect the number of decodes in the Band
Activity window?
Bobby/N4AU
--
n...@outlook.com
n...
Hi Mike,
Following copied from Syslog file. Pages of such errors. Kenwood TS590S
and W10.
[RIGCTRL][2022-03-01 06:01:50.482824][06:43:10.816962][warning]
kenwood_get_split_vfo_if(1583): unknown rxVFO=None
[SYSLOG][2022-03-01 06:01:54.042227][06:43:14.376024][warning] Detected
dropped audio s
I think I cleared the problem. I deleted all FT4 lines in the ini file
and re-created my FT4 Configuration. Must have been corrupted by earlier
versions. Now working as it should .
Bobby/N4AU
On 9/9/2022 5:37 AM, Bobby Chandler wrote:
When I click F4 to clear DX call etc. other things happen
When I click F4 to clear DX call etc. other things happen. Sometimes
program shuts off and sometimes the log box pops up. Does the F4
keyboard shortcut not work on FT4? Using W10 with TS590SG.
Bobby/N4AU
--
n...@outlook.com
n...@arrl.net
___
wsj
OK Mike. Had to renew the page. Thanks
BobbyN4AU
On 8/22/2022 11:34 AM, Black Michael via wsjt-devel wrote:
Look toward the bottom of the page. Below the 2.5.4 information.
Mike W9MDB
On Monday, August 22, 2022 at 11:32:05 AM CDT, Bobby Chandler via
wsjt-devel wrote:
I don't fi
I don't find rc-3 on the page yet>
Bobby/N4AU
On 8/22/2022 9:39 AM, Joe Taylor via wsjt-devel wrote:
Dear WSJT-X Users,
We are pleased to announce that Release Candidate WSJT-X 2.6.0-rc3 is
ready for download by beta testers. A list of its essential changes
from previous releases can be foun
Jim,
I use editpad or notepad++ and cut out every line that doesn't have my
call in it. This cuts it down to usable size.
Bobby/N4AU
--
n...@outlook.com
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourc
Mike,
Works fine on my TS590SG here in both Fakeit and Rig. Using Windows 10
and V2.5.4.
Bobby/N4AU
On 5/31/2022 11:04 AM, Black Michael via wsjt-devel wrote:
I need everyone to test the latest Hamlib
Testing in Rig Split and Fake It would be appreciated.
Successes/Failures please report.
N
When I press F4 to clear data on FT4 the TX is enabled and msg4 is
transmitted. Looks like this should happen when ALT F4 is pressed. Works
OK on FT8.
Bobby/N4AU
--
n...@outlook.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
htt
Kari,
Try copying the hamlib dll file from a working version and putting it
into 2.5.3. That worked for one of my friends with an icom 7300.
Bobby/N4AU
--
n...@outlook.com
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.n
Marco,
I just use Editpad or Notepad++ to replace all lines in the ALL.TXT that
don't have my call. This reduces size considerably.
Bobby/N4AU
On 10/15/2021 2:28 PM, Marco Calistri via wsjt-devel wrote:
Il 15/10/21 07:11, Reino Talarmo ha scritto:
*Question 2:*Is there a way (I mean a corre
Yes, Thanks to Joe and Team. Working fine here also.
Bobby/N4AU
--
n...@outlook.com
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
This may have already been reported but couldn't find it. Attempted to
work a call K4XXX/4 and auto-sequence didn't work. Could not even send
the selected macro. Kept sending his/her report so had to abandon contact.
Bobby/N4AU
--
n...@outlook.com
__
Mario,
Just have him set up a configuration for F/H.
Bobby/N4AU
On 3/25/2021 1:32 PM, Marco Calistri wrote:
Hello dev's team,
I received an UI feature request by an old friend of mine: I5MXX,
Marzio who is asking if possible to have the F/H switches on the main
window of WSJT-X, instead to
Right click in the window and click erase, or go to settings and turn
off the 'Start decode at top' box.
Bobby/N4AU
--
n...@outlook.com
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/li
Don't know if this happened in earlier versions or not. When ending a
contact with 73, or RR73 and another station is calling, the transmit
frequency (Red Goal Post) doesn't move to the new station when double
clicked in the RF Frequency window, and the response is on the old
contacts freq (QRM
S and P does not enable TX in the 2 release versions (2.3.0 rc1 and
rc2). Works fine up to V2.2.2.
Bobby/N4AU
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Has anyone noticed the DT being off by .3 to .4 on FT8 on the 2.2.0-rc1
version, even when time.is shows exact? It is OK on FT4 and V2.2.2,
always within about .1. Seems maybe a delay in the processing that was
not there in earlier versions.
Bobby/N4AU
--
Bobby Chandler
bob...@bellsouth.net
Editpad Lite does an excellent job.
Bobby/N4AU
--
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Hi Bobby,
On 5/27/2020 5:08 PM, Bobby Chandler N4AU wrote:
> Would it be a problem to only include line with 'my call' into the ALL
> TXT file. Just wondering.
>
> 2.2.0-rc2 doing fine here.
--The purpose of the ALL.TXT file is to provide a complete record of
--me
Would it be a problem to only include line with 'my call' into the ALL
TXT file. Just wondering.
2.2.0-rc2 doing fine here.
Bobby/N4AU
--
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.
if I misunderstood.
Bobby/N4AU
--
Bobby Chandler
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Did you rescan the adi file under the colors tab? Settings>Colors>Rescan
ADIF File.
Bobby/N4AU
--
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
ge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Bobby Chandler
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Bravo Bill! I agree 100%.
Bobby/N4AU
From: Bill Somerville
Sent: Sunday, March 31, 2019 11:53 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Someone released an Auto CQ mod - my 2 cents
On 31/03/2019 17:12, Carey Fisher wrote:
All I have to say, and I've been saying for s
You can also use the scroll wheel on the mouse for very fine adjustments. Put
the cursor on the slider and roll the wheel up or down.
Bobby/N4AU
From: Steven Franke via wsjt-devel
Sent: Saturday, March 23, 2019 8:32 AM
To: WSJT software development
Cc: Steven Franke
Subject: Re: [wsjt-devel]
esday, December 5, 2018, 12:50:55
PM CST, Bill Somerville wrote:
On
05/12/2018 18:42, Bobby Chandler
wrote:
It
would be good if there is a way to
easily put a tick box on the main
ct: Re: [wsjt-devel] DT, exactly what does it mean?
On 05/12/2018 18:42, Bobby Chandler wrote:
It would be good if there is a way to easily put a tick box on the main
page, maybe near the up/down arrows to shift up or down 60 cycles for
transmit (same as SHIFT>F12 or 11). I used this several
Bill,
It would be good if there is a way to easily put a tick box on the main
page, maybe near the up/down arrows to shift up or down 60 cycles for
transmit (same as SHIFT>F12 or 11). I used this several times in the
contest.
Bobby/N4AU
From: Bill Somerville
Sent: Tuesday, December 4, 2018
It would be good if there is a way to easily put a tick box on the main
page, maybe near the up/down arrows to shift up or down 60 cycles for
transmit (same as SHIFT>F12 or 11). I used this several times in the
contest.
Bobby/N4AU
___
wsjt-devel
Joe, Thanks much for the work. RC2 worked fine here and you already have the
items I noted so no need for anything else here.
73,
Bobby/N4AU
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https:/
Thanks Mike. Patch worked fine here.
Bobby
From: Black Michael via wsjt-devel
Sent: Sunday, May 20, 2018 4:30 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael
Subject: Re: [wsjt-devel] Delete wav files patch
So this adds a new menu item which does erase on exit and is the default cho
Mike, how are these patches applied?
Thanks,
Bobby/N4AU
From: Black Michael via wsjt-devel
Sent: Sunday, May 20, 2018 10:05 AM
To: WSJT Software Development
Cc: Black Michael
Subject: [wsjt-devel] Delete wav files patch
In many instances left over wav files can accumulate even if save "None"
PA0TBR
I just set a config for Fox/Hound and only put the frequencies for
DXpedition mode in it. Just switch to the config and all OK.
Bobby/N4AU
bob...@bellsouth.net
n...@arrl.net
--
Check out the vibrant tech
What would be wrong with using these macros:
CQ FD N4AU
@ 1d AL
@ TU CQ FD
Run with Auto SEQ off.
Bobby/N4AU
bob...@bellsouth.net
n...@arrl.net
--
Check out the vibrant tech community on one of the world's most
en
Mike, I believe Joe has a routine in a later build that inhibits FOX from
using standard frequencies. It won't work, however, until the 'FOX' builds
it or they download the GA release when it is available.
Bobby/N4AU
bob...@bellsouth.net
n...@arrl.net
-
The only thing noted here, other than CQ every sequence, was that if you
forget to uncheck 'hound' and move to WSPR, the Enable TX shuts off
immediately after a decode cycle.
N4AU/Bobby
--
Bobby Chandler
bob...@bellsouth.net
n..
42 matches
Mail list logo