Bill,
It would be good if there is a way to easily put a tick box on the main 
page, maybe near the up/down arrows to shift up or down 60 cycles for 
transmit (same as SHIFT>F12 or 11). I used this several times in the 
contest.

Bobby/N4AU 


From: Bill Somerville 
Sent: Tuesday, December 4, 2018 4:25 PM
To: wsjt-devel@lists.sourceforge.net 
Subject: Re: [wsjt-devel] DT, exactly what does it mean?

On 04/12/2018 22:11, David Fisher wrote:

  I see “DT” values that range from about 0.0 to about 0.5 in my system.   Does 
this mean that, on average, my system clock is a little slow, or a little fast?

   

  I’ve searched the documentation.  It explains that the column of numbers show 
the difference between the signal and the system’s time, but it doesn’t explain 
if the calculation is “signal – system” or “system – signal”.

   

  FWIW, my guess is that the value is “system – signal” and that the 200 or 
300ms delta is due to signal processing delays in the radio.  In my case, 2 to 
300 ms processing delays could be considered about right, given the DSP 
filtering.

   

  Thanks.

   

  Dave / NX6D

The DT figure is the measured difference between your PC clock and the sync of 
a decoded signal. A positive DT implies that the signal clock is behind yours. 
Positive components of the DT are the sender's clock being slow, and 
propagation delay. Also contributing are latencies including audio buffering 
and other processing delay which can be at either of both ends of the link and 
like propagation delay can only increase the DT, net clock difference can 
contribute a negative or a positive DT component.

73
Bill
G4WJS.




--------------------------------------------------------------------------------



--------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to