Joe
Funny thing that you have going. From what I can see, you are the ONLY one
that this is happening to,
so it has to be in your setup. Is it still doing it? If you start up WSJT
via N1MM, is it now logging correctly?
If so, can you regard it as a glitch? If the problem can't be reproduced,
h
Tim
If you know where the spot counter is for FT8, that is where the spot
counter is for WSPR. It’s along the bottom line of the WSJT window.
Dennis W1UE
On Mon, Mar 11, 2024 at 14:42 Tim Urban via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
>
> I the Release: WSJT-X 2.7.0-rc3 Januar
Glenn
A beverage antenna will often produce weaker signals than, say, an inverted
L.
However, it will decrease the noise on the signal, and make it easier to
copy, which
should make it easier to decode.
Dennis W1UE
On Mon, Nov 13, 2023 at 4:29 PM Glenn Williams via wsjt-devel <
wsjt-devel@lists
Glenn
Please read section 12 of the online documentation.
It explains what you want to know.
Dennis W1UE
On Sat, Oct 21, 2023 at 8:27 AM Glenn Williams via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Hi,
> The following line of text is found once in my huge ALL.TXT file. Note
> th
Thank you Gene!
UE
On Thu, Jun 29, 2023 at 8:31 AM Gene Hinkle via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> K5PA, Yes, for IC-7300, IC-705, IC-7610
>
> Gene, K5PA
>
>
> Gene
>
> > On Jun 29, 2023, at 6:03 AM, Dennis W1UE via wsjt-devel <
>
Anyone around that can test the upcoming Hamlib dispersal with the RC2
software that's coming out in the near future? Instructions will be
provided to volunteers. Its simple, probably won't take you 30 minutes.
Dennis w1UE
___
wsjt-devel mailing list
w
Hannu
Use N1mM+. Setup the contest i nN1mM+, then import the adi file into
N1MM+. Then you can
write the Cabrillo file from that.
Dennis W1UE
On Mon, Jun 5, 2023 at 2:48 AM Hannu Eloranta via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> So Cabrillo log creation didn't work.
> How
I have seen this twice before, all while switching configurations.
However, not
every time I switch configurations do I see it. It only happens once in a
while.
Using 2.7.0RC1 Improved, Win 10/11.
Dennis W1UE
On Thu, Jun 1, 2023 at 2:36 PM Rick via wsjt-devel <
wsjt-devel@lists.sourceforge.net
George
What operating system are you using?
Since you're the first with a 7610, I"d like to include you as a tester.
Dennis W1UE
On Sat, May 13, 2023 at 5:01 PM WB5JJJ via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> This also affected the IC-7610, but the new file fixed the prob
John
What is your operating system?
Thanks!
Dennis W1UE
On Sat, May 13, 2023 at 8:38 AM g4kla--- via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Mike,
>
> No problem with Hamlib-4.6 on Kenwood TS870s. Working correctly with dual
> VFOs (Split Operation: Rig)
>
> — John G4KLA
>
>
I'm looking to get a group of ops together to review Hamlib files prior to
the release of new ones. Any op with any rig is eligible to apply.
If you're interested, please specify your rig, version of Windows (or your
OS), and any other specifics that may be applicable.
Our immediate task is to r
Found what appears to be a bug. If you set CQ: to “Max Dist”, and set the
special Activity to be the FT Roundup contest. Then call a normal CQ.
When you get an answer or several, the program does not move any of the
callers and generate the standard messages. WSJT just calls another CQ.
If you
Dave
I’ve operated a lot as the Fox from HQ9X the past week. Let me assure you,
if u try to operate as the Fox on one of the standard frequencies, you get
a warning box and PTT won’t energize, ie wSJT won’t xmit.
Dennis HQ9X for one more day!
On Mon, Nov 28, 2022 at 08:02 Dave Bernheisel via ws
Somehow we need to isolate this problem and
> see what can be done to make the negotiation more forgiving of delays,
> or whatever, and not simply shut down the channel.
>
> -- Joe, K1JT
>
> On 10/24/2022 8:54 AM, Dennis W1UE via wsjt-devel wrote:
> > I started the
, K1JT
>
>
>
> On 10/24/2022 2:16 PM, Tony ZL3HAM via wsjt-devel wrote:
>
> Hi Dennis,
>
>
>
> I use DX Lab Suite and JT Alert and I got a Fatal Error message and also
>
> one that said JT9 failed to close but I wasn't using JT9.
>
>
>
> The progr
Tony
Were you just using WSJT only, or were you using it with N1MM+
Any error messages, or did the WSJT entry window just "disappear"?
Dennis W1UE
On Mon, Oct 24, 2022 at 1:52 PM Tony ZL3HAM via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Hi All,
> >
> > I'm running Ver 2.6.0-rc4 o
I started the contest using 2.6.0RC4. I operate with WSJT in conjunction
with N1MM+, using the DX Lab Suite Commander to a K30/Mini, through a
Remote Rig
unit to the remote transmitting site. I used SO1V mode for this contest-
no SO2R. The combination worked perfectly for about 6 hours, then the
I can also confirm problem #1. It is the same problem that existed in
version 2.6.0 RC1,2,3 and 4.
Since I use WSJT in combination with N1MM+ for logging, I get a "TCP Error"
when the program closes.
If I'm not using the combo, WSJT just closes. I have not noticed that the
closing occurs when us
5 PM Joe Taylor wrote:
> Hi Dennis and Ron,
>
> Thanks for your reports. This message is off-list, since your needs are
> rather specialized -- but I have CC'd other members of our core
> development group.
>
> On 8/23/2022 2:43 PM, Dennis W1UE via wsjt-devel wrote:
> &g
t;
wsjt-devel@lists.sourceforge.net> wrote:
> Same here, running N1MM with 2 instances it keeps crashing and locking
> everything down when it does. It took a long time for the first occurrence
> but now its lucky to stay up 30 min.
>
> Ron, WV4P
>
> On Tue, Aug 23, 202
I had high hopes for 2.6.0 rc3. I ran it for 25 hours decode time using an
SO2R setup. It never stopped working nor crashed.2.6.0 rc1 and rc2- the EW
just disappeared from the screen and I got an error box related to TCP.
Since that first stoppage- or crash- I've had 4 more crashes. The longest
Installed RC3 on Win10 and Win11 computers. No issues with either install.
Set up and operated So2R using Win10. Been operating now for 2 1/2 hours-
have not
had a crash! Have utilized the Active Stations Window, and kept CQ:Max
Dist the entire time
on both EWs. No issues with any part of the
Marty
#1 was fixed in tx 2.6.2. The blue color was not random- either the OK
button or the cancel button had the blue outline. The one that had the
outline was the one that was “clicked” when you last clicked a button. So,
if u used the ENTER key to clear the window you either logged or didn’t
ng the error messages though, like I did with 2.6rc1, unless I
> try and restart the program without first ending the jt9 process.
>
>
>
>
>
>
>
> *From:* Dennis W1UE via wsjt-devel
> *Sent:* Wednesday, July 27, 2022 8:40 PM
> *To:* WSJT software development
> *Cc:
Mike
I wrote this up and submitted it a week ago. I could not find any sequence
of events to cause the WSJT window to suddenly close. I found it took
anywhere from 15min to 3 hrs between crashes. I also get a TCP error when
it closes, as I have wsjt mated to N1mm+ for logging.
Dennis W1UE
On
I really appreciate the hours and effort that have gone into the creation
of WSJT. The enhancements in 2.6 are all great, except for the one that
seems to have created a problem for me. I'll describe my setup and then
the problem.
Computer #1- I7 11th gen, 16Gb RAM, Win 11 Pro
Computer #2- I5 4
26 matches
Mail list logo
