_
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
--
Håken Hveem
Welhavensgate 11A
2317 Hamar.
-
Ok, i did that. It installed these packages:
apt-get install python3-pyqt5.qtmultimedia qt5-image-formats-plugins
pyqt5-dev-tools libqt5serialport5-dev libqt5serialport5
qtmultimedia5-dev libqt5multimedia5 qtmultimedia5-examples
Leser pakkelister ... Ferdig
Skaper oversikt over avhengighetsfor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 13ee:0001 MosArt
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
On 23. sep. 2015 03:36, Håken Hveem wrote:
> I have now a fresh inst
I have now a fresh install, but the soundcards in the radio is not detected.
They are not mentioned in the dmesg output.
On 23. sep. 2015 01:46, Håken Hveem wrote:
> If anyone cannot figure out the reason for the weird behavior,- i am
> willing to try a fresh install of Linux mint.
>
If anyone cannot figure out the reason for the weird behavior,- i am
willing to try a fresh install of Linux mint.
Perhaps that solves the issue.
Den 23. sep. 2015 01:27, skrev Bill Somerville:
> On 23/09/2015 00:14, Håken Hveem wrote:
> Hi Håken,
>> Now, can anyone describe in de
=48&t=205648
Now, can anyone describe in detail exactly how wsjt-x deals with the
input audio, so perhaps the folks at the linux mint forum can understand
in detail how the audio streams is handled by WSJT-X ?
Den 22. sep. 2015 01:21, skrev Håken Hveem:
> The problem is probably related t
=48&t=205648
Now, can anyone describe in detail exactly how wsjt-x deals with the
input audio, so perhaps the folks at the linux mint forum can understand
in detail how the audio streams is handled by WSJT-X ?
Den 22. sep. 2015 01:21, skrev Håken Hveem:
> The problem is probably related t
h the Mint folks.
>>
>>
>> 73's
>> Greg, KI7MT
>>
> I'm running 1.6.0 r5881 (32bit) from Greg's PPA on Mint 17.1 and 17.2 -
> no sound system modifications made, and no problems whatsoever. Running
> WSPR-
same problem exists there, it is
not related to Linux mint.
Den 21. sep. 2015 16:21, skrev Bill Somerville:
> On 21/09/2015 13:33, Håken Hveem wrote:
> Hi Håken,
>> It works fine with fldigi,that also uses pulseaudio.
> I understand but fldigi and WSJT-X may not utilize the a
It works fine with fldigi,that also uses pulseaudio.
Den 21. sep. 2015 13:55, skrev Bill Somerville:
> Hi Håken,
>
> On 21/09/2015 12:47, Håken Hveem wrote:
>> it looses the rx as described, if i restart the program it works
>> until i TX again.
>> I dont know why, b
ok.
But it looses the rx as described, if i restart the program it works
until i TX again.
I dont know why, but it looks like a bug.
Den 21. sep. 2015 13:17, skrev Bill Somerville:
> On 21/09/2015 05:39, Håken Hveem wrote:
>
> Hi Håken,
>> Hi, i have a problem.
>> It
---
Håken Hveem
--
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
I found the error, the "power slider" must be at its top position,
weird,- since the receive slider must be at almost the bottom of the screen.
Den 21. sep. 2015 04:21, skrev Håken Hveem:
>
> Hi, i have a problem.
> It seems that the WSJT-X program does not put out any audio
Hi, i have a problem.
It seems that the WSJT-X program does not put out any audio, so i do not
get any TX power.
I have tried to resolve this with help of the Yeasu FT-991 users group
on facebook https://www.facebook.com/groups/yaesuft991/
The software is set to use:
Input:
alsa_input.usb-Burr-Bro
sed -e "s,^.* ,," | sort -nu
>
> My Results:
> 8000
> 11025
> 16000
> 22050
> 32000
> 44100
> 48000
>
>
> 73's
> Greg, KI7MT
>
>
> On 08/31/2015 09:36 AM, Bill Somerville wrote:
>> On
And how do i interface interface between the USB card and wsjt, with
pulse audio ?
Den 31. aug. 2015 13:51, skrev Richard Bown:
> On Mon, 31 Aug 2015 13:36:59 +0200
> Håken Hveem wrote:
>
>> Here is the error messages from my attempt to run WSJT from Kamals ppa
>>
ng what you write on the reflector.
> I use wsjt-x 1.6.1 it has
> jt65 all modes
> jt9 all modes
> iscatt
> jtmsk (replacement for fsk)
>
> Richard.
>
> -Original Message-
> From: Håken Hveem
> Sent: Monday, August 31, 2015 12:36 PM
> To: wsjt-devel@lists.
Here is the error messages from my attempt to run WSJT from Kamals ppa
on my ubuntu distro:
wsjt
**
WSJT Version 9.3 r2792 , by K1JT
Revision date: 2012-12-12 08:12:50 -0800 (Wed, 12 Dec 2012)
Run date: Mon Aug 31 11:17:32 2015 UTC
A
onfusion for allot of folks, and
> should not be ( in my opinion ) a wsjt-devel discussion / issue.
>
> 73's
> Greg, KI7MT
>
>
> On 08/30/2015 03:46 PM, Håken Hveem wrote:
>> It could be that the chipset on the rigblaster advantage is causing
>> problems. inf
then this is the safest way to do it.
>>
>> 73
>> Bill
>> G4WJS.
>
> --
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
--
---
Håken Hveem
--
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
gt;
> $ make PYTHON=/usr/bin/python3 F2PY=/usr/bin/f2py3.4
>
> I am no expert in WSJT building so even this my not be necessary but if
> it is then this is the safest way to do it.
>
> 73
> Bill
> G4WJS.
>
> -----
Ok, i have tried to build it with jtsdk, and that results in exactly the
same sample rate related bug.
This is going to be a loong rad, since i have included the build
output,the configure output and finally another python issue.
I have also refreshed the files from the svn.
Here we go:
./config
ter.filedialog import *
>>
>> As seen here: http://sourceforge.net/p/wsjt/wsjt/HEAD/tree/trunk/wsjt.py#
>>
>> So, either you building an older version of WSJT, which was Python2
>> based, or, your tool chain is incorrect. I suspect the former, your not
>> bu
python3-numpy, python3-pil, python3-pil.imagetk,
> python3-pip, python3-setuptools
>
> I am not sure where you got the package list for building WSJT, but it
> needs to be updated.
>
>
> 73's
> Greg, KI7MT
>
>
> On 08/28/2015 03:01 AM, Håken Hveem wrote:
p2Palette
from types import *
import array
import _thread
import webbrowser
How do i fix this ?
It compiled just fine with the following packets installed:
build-essential gfortran python-numpy python-scipy python-imaging-tk
python-imaging python-all python-all-dev
---
,-
Linux mint and jack audio server does not play along nice, and wsjt
needs libjack-jackd2-0.
Fldigi uses portaudio,and works fine with that.
The newest wsjt-x also works, the older version 1.1 also had problems
relating to the sample rate.
---
Håken Hveem
LA1RMA
26 matches
Mail list logo
