Hi, i have a problem. It seems that the WSJT-X program does not put out any audio, so i do not get any TX power. I have tried to resolve this with help of the Yeasu FT-991 users group on facebook https://www.facebook.com/groups/yaesuft991/ The software is set to use: Input: alsa_input.usb-Burr-Brown_from_TI-USB_Audio_Codec-00-codec.analog.stereo (mono)
Output:Input: alsa_output.usb-Burr-Brown_from_TI-USB_Audio_Codec-00-codec.analog.stereo (mono) Rig: Yeasu FT-991 Poll interval: 1 s PPT method: CAT serial port: /dev/ttyUSB0 Baud rate: 38400 Data bits: 8 stopbits: 2 Handshake: None The settings in the radio are: Menu : setting 108: rear 110: RTS 111:USB These settings are also mentioned in the user manual. Still, i cant get any TX power response. The radio is connected to the computer with a USB cable, and PPT and dial frequency control + RX works. the package i am using is from : deb http://ppa.launchpad.net/ki7mt/wsjtx-next/ubuntu trusty main Information on my computer: uname -a Linux Haaken-Cooler-Master 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux hwinfo: haaken-cooler-master description: Desktop Computer product: System Product Name (SKU) vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=desktop family=To be filled by O.E.M. sku=SKU uuid=40235D67-DAD7-DD11-9B0F-74D02B25F01A *-core description: Motherboard product: SABERTOOTH Z77 vendor: ASUSTeK COMPUTER INC. physical id: 0 version: Rev 1.xx serial: 130208369800300 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1805 date: 12/19/2012 size: 64KiB capacity: 8128KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: LGA1155 size: 2536MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=1 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal varies unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: internal unified *-memory:0 UNCLAIMED physical id: 1 *-bank UNCLAIMED description: DIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: CMZ8GX3M2A1866C9 vendor: AMI physical id: 0 serial: 00000000 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-memory:1 description: System Memory physical id: 5b slot: System board or motherboard *-bank:0 description: DIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: CMZ8GX3M2A1866C9 vendor: AMI physical id: 0 serial: 00000000 slot: ChannelA-DIMM1 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] product: [Empty] vendor: [Empty] physical id: 1 serial: [Empty] slot: ChannelB-DIMM0 *-bank:2 description: DIMM [empty] product: [Empty] vendor: [Empty] physical id: 2 serial: [Empty] slot: ChannelB-DIMM1 *-memory:2 UNCLAIMED physical id: 2 *-memory:3 UNCLAIMED physical id: 3 *-pci description: Host bridge product: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:f6000000-f70fffff ioport:e8000000(size=167772160) *-display description: VGA compatible controller product: GK106 [GeForce GTX 660] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f6000000-f6ffffff memory:e8000000-efffffff memory:f0000000-f1ffffff ioport:e000(size=128) memory:f7000000-f707ffff *-multimedia description: Audio device product: GK106 HDMI Audio Controller vendor: NVIDIA Corporation physical id: 0.1 bus info: pci@0000:01:00.1 version: a1 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:17 memory:f7080000-f7083fff *-usb:0 description: USB controller product: 7 Series/C210 Series Chipset Family USB xHCI Host Controller vendor: Intel Corporation physical id: 14 bus info: pci@0000:00:14.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:41 memory:f7420000-f742ffff *-communication description: Communication controller product: 7 Series/C210 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_me latency=0 resources: irq:50 memory:f743a000-f743a00f *-network description: Ethernet interface product: 82579V Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: 74:d0:2b:25:f0:1a size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k duplex=full firmware=0.13-4 ip=10.0.0.54 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:48 memory:f7400000-f741ffff memory:f7438000-f7438fff ioport:f020(size=32) *-usb:1 description: USB controller product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:16 memory:f7437000-f74373ff *-multimedia description: Audio device product: 7 Series/C210 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:51 memory:f7430000-f7433fff *-pci:1 description: PCI bridge product: 7 Series/C210 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: c4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:e0100000-e02fffff ioport:e0300000(size=2097152) *-pci:2 description: PCI bridge product: 7 Series/C210 Series Chipset Family PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: c4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:f7300000-f73fffff *-usb description: USB controller product: ASM1042 SuperSpeed USB Host Controller vendor: ASMedia Technology Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: msi msix pm pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:f7300000-f7307fff *-pci:3 description: PCI bridge product: 7 Series/C210 Series Chipset Family PCI Express Root Port 7 vendor: Intel Corporation physical id: 1c.6 bus info: pci@0000:00:1c.6 version: c4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:18 ioport:d000(size=4096) memory:f7200000-f72fffff *-storage description: SATA controller product: ASM1062 Serial ATA Controller vendor: ASMedia Technology Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: storage msi pm pciexpress ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:47 ioport:d050(size=8) ioport:d040(size=4) ioport:d030(size=8) ioport:d020(size=4) ioport:d000(size=32) memory:f7200000-f72001ff *-pci:4 description: PCI bridge product: 7 Series/C210 Series Chipset Family PCI Express Root Port 8 vendor: Intel Corporation physical id: 1c.7 bus info: pci@0000:00:1c.7 version: c4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:19 ioport:c000(size=4096) memory:f7100000-f71fffff *-storage description: SATA controller product: ASM1062 Serial ATA Controller vendor: ASMedia Technology Inc. physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: storage msi pm pciexpress ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:49 ioport:c050(size=8) ioport:c040(size=4) ioport:c030(size=8) ioport:c020(size=4) ioport:c000(size=32) memory:f7100000-f71001ff *-usb:2 description: USB controller product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:f7436000-f74363ff *-isa description: ISA bridge product: Z77 Express Chipset LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide:0 description: IDE interface product: 7 Series/C210 Series Chipset Family 4-port SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 04 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f0b0(size=16) ioport:f0a0(size=16) *-serial UNCLAIMED description: SMBus product: 7 Series/C210 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:f7435000-f74350ff ioport:f000(size=32) *-ide:1 description: IDE interface product: 7 Series/C210 Series Chipset Family 2-port SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.5 bus info: pci@0000:00:1f.5 version: 04 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:f090(size=8) ioport:f080(size=4) ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=16) ioport:f040(size=16) *-scsi:0 physical id: 5 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Crucial_CT256MX1 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: MU01 serial: 14240C4A0EB6 size: 238GiB (256GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=4096 signature=000ef79d *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 07aef57c-cb34-4ebd-923f-8df063b28e51 size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized configuration: created=2015-08-04 06:11:57 filesystem=ext4 lastmountpoint=/ modified=2015-09-20 16:25:24 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2015-09-20 16:25:24 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 8135MiB capacity: 8135MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 8135MiB capabilities: nofs *-scsi:1 physical id: 6 logical name: scsi2 capabilities: emulated *-disk description: ATA Disk product: WDC WD10EZEX-00R vendor: Western Digital physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: 0A80 serial: WD-WMC1S3823174 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=4096 signature=32ab32aa *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 version: 1.0 serial: 8f858dc8-91ab-4b64-8408-83a33358f6ee size: 364GiB capacity: 364GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized configuration: created=2015-08-31 12:55:08 filesystem=ext4 lastmountpoint=/ modified=2015-09-10 15:11:23 mounted=2015-09-10 15:11:23 state=clean *-volume:1 description: Extended partition physical id: 2 bus info: scsi@2:0.0.0,2 logical name: /dev/sdb2 size: 567GiB capacity: 567GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sdb5 capacity: 559GiB *-logicalvolume:1 description: Linux swap / Solaris partition physical id: 6 logical name: /dev/sdb6 capacity: 8134MiB capabilities: nofs *-scsi:2 physical id: 7 bus info: usb@1:1.6 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde configuration: sectorsize=512 *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf configuration: sectorsize=512 *-power UNCLAIMED description: To Be Filled By O.E.M. product: To Be Filled By O.E.M. vendor: To Be Filled By O.E.M. physical id: 1 version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. capacity: 32768mWh Dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-38-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=07aef57c-cb34-4ebd-923f-8df063b28e51 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd49cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd49d000-0x00000000dda76fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dda77000-0x00000000dda86fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dda87000-0x00000000ddbabfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddbac000-0x00000000de7f0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de7f1000-0x00000000de7f1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de7f2000-0x00000000de834fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de835000-0x00000000dec56fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dec57000-0x00000000deff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH Z77, BIOS 1805 12/19/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FF0000000 write-back [ 0.000000] 2 base 210000000 mask FF8000000 write-back [ 0.000000] 3 base 218000000 mask FFC000000 write-back [ 0.000000] 4 base 21C000000 mask FFE000000 write-back [ 0.000000] 5 base 21E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 256MB, type WB [ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB [ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB [ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB [ 0.000000] reg 5, base: 8672MB, range: 16MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 8176M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8688MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7d0-0x000fd7df] mapped at [ffff8800000fd7d0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE [ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff] [ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff] [ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd49cfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdd3fffff] page 2M [ 0.000000] [mem 0xdd400000-0xdd49cfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xde7f1000-0xde7f1fff] [ 0.000000] [mem 0xde7f1000-0xde7f1fff] page 4k [ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xde835000-0xdec56fff] [ 0.000000] [mem 0xde835000-0xde9fffff] page 4k [ 0.000000] [mem 0xdea00000-0xdebfffff] page 2M [ 0.000000] [mem 0xdec00000-0xdec56fff] page 4k [ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdeff4000-0xdeffffff] [ 0.000000] [mem 0xdeff4000-0xdeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x348fa000-0x36474fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DDA7A078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DDA84E28 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DDA7A180 00ACA5 (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DDBAA080 000040 [ 0.000000] ACPI: APIC 0x00000000DDA84F38 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DDA84FB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DDA84FF8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DDA85038 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DDA85070 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112) [ 0.000000] ACPI: BGRT 0x00000000DDA869A8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DDA85560 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DDA85F10 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff] [ 0.000000] NODE_DATA [mem 0x21eff1000-0x21eff5fff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xdd49cfff] [ 0.000000] node 0: [mem 0xde7f1000-0xde7f1fff] [ 0.000000] node 0: [mem 0xde835000-0xdec56fff] [ 0.000000] node 0: [mem 0xdeff4000-0xdeffffff] [ 0.000000] node 0: [mem 0x100000000-0x21effffff] [ 0.000000] On node 0 totalpages: 2082921 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14116 pages used for memmap [ 0.000000] DMA32 zone: 903372 pages, LIFO batch:31 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd49d000-0xdda76fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdda77000-0xdda86fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdda87000-0xddbabfff] [ 0.000000] PM: Registered nosave memory: [mem 0xddbac000-0xde7f0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xde7f2000-0xde834fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdec57000-0xdeff3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021ec00000 s81408 r8192 d20992 u524288 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050352 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=07aef57c-cb34-4ebd-923f-8df063b28e51 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8089452K/8331684K available (7626K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 242232K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3410.175 MHz processor [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.35 BogoMIPS (lpj=13640700) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000033] ACPI: Core revision 20140424 [ 0.004706] ACPI: All ACPI Tables successfully acquired [ 0.069160] Security Framework initialized [ 0.069174] AppArmor: AppArmor initialized [ 0.069175] Yama: becoming mindful. [ 0.069559] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.071407] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.072254] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.072260] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.072466] Initializing cgroup subsys memory [ 0.072482] Initializing cgroup subsys devices [ 0.072487] Initializing cgroup subsys freezer [ 0.072489] Initializing cgroup subsys net_cls [ 0.072491] Initializing cgroup subsys blkio [ 0.072494] Initializing cgroup subsys perf_event [ 0.072495] Initializing cgroup subsys net_prio [ 0.072500] Initializing cgroup subsys hugetlb [ 0.072517] CPU: Physical Processor ID: 0 [ 0.072518] CPU: Processor Core ID: 0 [ 0.072521] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.072521] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.072783] mce: CPU supports 9 MCE banks [ 0.072793] CPU0: Thermal monitoring enabled (TM1) [ 0.072802] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.072802] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.072802] tlb_flushall_shift: 2 [ 0.072901] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.073722] ftrace: allocating 29244 entries in 115 pages [ 0.084077] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.123723] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09) [ 0.123728] TSC deadline timer enabled [ 0.123745] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.123759] ... version: 3 [ 0.123760] ... bit width: 48 [ 0.123761] ... generic registers: 8 [ 0.123761] ... value mask: 0000ffffffffffff [ 0.123762] ... max period: 0000ffffffffffff [ 0.123762] ... fixed-purpose events: 3 [ 0.123763] ... event mask: 00000007000000ff [ 0.124953] x86: Booting SMP configuration: [ 0.124954] .... node #0, CPUs: #1 [ 0.138212] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.138274] #2 #3 [ 0.165191] x86: Booted up 1 node, 4 CPUs [ 0.165194] smpboot: Total of 4 processors activated (27281.40 BogoMIPS) [ 0.167617] devtmpfs: initialized [ 0.169586] evm: security.selinux [ 0.169587] evm: security.SMACK64 [ 0.169587] evm: security.SMACK64EXEC [ 0.169588] evm: security.SMACK64TRANSMUTE [ 0.169588] evm: security.SMACK64MMAP [ 0.169589] evm: security.ima [ 0.169590] evm: security.capability [ 0.169623] PM: Registering ACPI NVS region [mem 0xdda87000-0xddbabfff] (1200128 bytes) [ 0.169635] PM: Registering ACPI NVS region [mem 0xde7f2000-0xde834fff] (274432 bytes) [ 0.170223] pinctrl core: initialized pinctrl subsystem [ 0.170272] regulator-dummy: no parameters [ 0.170301] RTC time: 1:00:53, date: 09/21/15 [ 0.170337] NET: Registered protocol family 16 [ 0.170441] cpuidle: using governor ladder [ 0.170443] cpuidle: using governor menu [ 0.170477] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.170478] ACPI: bus type PCI registered [ 0.170479] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.170531] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.170532] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.170585] PCI: Using configuration type 1 for base access [ 0.173484] ACPI: Added _OSI(Module Device) [ 0.173486] ACPI: Added _OSI(Processor Device) [ 0.173487] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.173487] ACPI: Added _OSI(Processor Aggregator Device) [ 0.175228] ACPI: Executed 1 blocks of module-level executable AML code [ 0.177445] ACPI: Dynamic OEM Table Load: [ 0.177450] ACPI: SSDT 0xFFFF880212D02000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.181339] ACPI: Dynamic OEM Table Load: [ 0.181343] ACPI: SSDT 0xFFFF880212D3D000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.185260] ACPI: Dynamic OEM Table Load: [ 0.185263] ACPI: SSDT 0xFFFF880212CC6C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.189547] ACPI: Interpreter enabled [ 0.189551] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.189554] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.189563] ACPI: (supports S0 S3 S4 S5) [ 0.189564] ACPI: Using IOAPIC for interrupt routing [ 0.189580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.193246] ACPI: Power Resource [FN00] (off) [ 0.193297] ACPI: Power Resource [FN01] (off) [ 0.193347] ACPI: Power Resource [FN02] (off) [ 0.193395] ACPI: Power Resource [FN03] (off) [ 0.193445] ACPI: Power Resource [FN04] (off) [ 0.193810] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.193814] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.193948] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.194028] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.194029] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.194411] PCI host bridge to bus 0000:00 [ 0.194413] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.194414] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.194415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.194416] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.194417] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.194418] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.194419] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.194420] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.194421] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.194422] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.194424] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.194429] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.194489] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.194513] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.194541] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.194588] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.194608] pci 0000:00:14.0: reg 0x10: [mem 0xf7420000-0xf742ffff 64bit] [ 0.194671] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.194700] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.194729] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.194749] pci 0000:00:16.0: reg 0x10: [mem 0xf743a000-0xf743a00f 64bit] [ 0.194818] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.194880] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.194895] pci 0000:00:19.0: reg 0x10: [mem 0xf7400000-0xf741ffff] [ 0.194902] pci 0000:00:19.0: reg 0x14: [mem 0xf7438000-0xf7438fff] [ 0.194909] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f] [ 0.194964] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.194994] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.195025] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.195043] pci 0000:00:1a.0: reg 0x10: [mem 0xf7437000-0xf74373ff] [ 0.195124] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.195164] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.195193] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.195207] pci 0000:00:1b.0: reg 0x10: [mem 0xf7430000-0xf7433fff 64bit] [ 0.195272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.195304] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.195330] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.195404] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.195438] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.195466] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.195540] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.195573] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.195600] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400 [ 0.195673] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.195707] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.195732] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.195806] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.195839] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.195869] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.195887] pci 0000:00:1d.0: reg 0x10: [mem 0xf7436000-0xf74363ff] [ 0.195968] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.196008] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.196037] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.196180] pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f [ 0.196193] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7] [ 0.196199] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3] [ 0.196205] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7] [ 0.196211] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3] [ 0.196217] pci 0000:00:1f.2: reg 0x20: [io 0xf0b0-0xf0bf] [ 0.196223] pci 0000:00:1f.2: reg 0x24: [io 0xf0a0-0xf0af] [ 0.196295] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.196307] pci 0000:00:1f.3: reg 0x10: [mem 0xf7435000-0xf74350ff 64bit] [ 0.196325] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.196386] pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185 [ 0.196398] pci 0000:00:1f.5: reg 0x10: [io 0xf090-0xf097] [ 0.196404] pci 0000:00:1f.5: reg 0x14: [io 0xf080-0xf083] [ 0.196410] pci 0000:00:1f.5: reg 0x18: [io 0xf070-0xf077] [ 0.196416] pci 0000:00:1f.5: reg 0x1c: [io 0xf060-0xf063] [ 0.196422] pci 0000:00:1f.5: reg 0x20: [io 0xf050-0xf05f] [ 0.196429] pci 0000:00:1f.5: reg 0x24: [io 0xf040-0xf04f] [ 0.196533] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000 [ 0.196542] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.196550] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.196558] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.196564] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.196569] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.196637] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300 [ 0.196646] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.201187] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.201191] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.201195] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.201199] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.201268] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.201351] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.201382] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7307fff 64bit] [ 0.201532] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.201562] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.209184] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.209191] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff] [ 0.209281] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601 [ 0.209302] pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.209314] pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.209327] pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.209339] pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.209351] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.209364] pci 0000:04:00.0: reg 0x24: [mem 0xf7200000-0xf72001ff] [ 0.209462] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.217179] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.217184] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.217189] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff] [ 0.217279] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601 [ 0.217299] pci 0000:05:00.0: reg 0x10: [io 0xc050-0xc057] [ 0.217311] pci 0000:05:00.0: reg 0x14: [io 0xc040-0xc043] [ 0.217324] pci 0000:05:00.0: reg 0x18: [io 0xc030-0xc037] [ 0.217336] pci 0000:05:00.0: reg 0x1c: [io 0xc020-0xc023] [ 0.217348] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc01f] [ 0.217361] pci 0000:05:00.0: reg 0x24: [mem 0xf7100000-0xf71001ff] [ 0.217459] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.225176] pci 0000:00:1c.7: PCI bridge to [bus 05] [ 0.225181] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.225185] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff] [ 0.225511] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.225543] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.225574] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.225604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.225636] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.225666] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.225696] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.225726] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.225879] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.225892] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.225955] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.225956] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.225957] vgaarb: loaded [ 0.225958] vgaarb: bridge control possible 0000:01:00.0 [ 0.226116] SCSI subsystem initialized [ 0.226141] libata version 3.00 loaded. [ 0.226159] ACPI: bus type USB registered [ 0.226170] usbcore: registered new interface driver usbfs [ 0.226175] usbcore: registered new interface driver hub [ 0.226187] usbcore: registered new device driver usb [ 0.226266] PCI: Using ACPI for IRQ routing [ 0.227583] PCI: pci_cache_line_size set to 64 bytes [ 0.227631] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.227632] e820: reserve RAM buffer [mem 0xdd49d000-0xdfffffff] [ 0.227634] e820: reserve RAM buffer [mem 0xde7f2000-0xdfffffff] [ 0.227635] e820: reserve RAM buffer [mem 0xdec57000-0xdfffffff] [ 0.227635] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.227636] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.227708] NetLabel: Initializing [ 0.227709] NetLabel: domain hash size = 128 [ 0.227709] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.227717] NetLabel: unlabeled traffic allowed by default [ 0.227757] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.227760] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.229788] Switched to clocksource hpet [ 0.233513] AppArmor: AppArmor Filesystem Enabled [ 0.233536] pnp: PnP ACPI init [ 0.233546] ACPI: bus type PNP registered [ 0.233609] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.233612] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.233669] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.233670] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.233671] system 00:01: [io 0xffff] has been reserved [ 0.233672] system 00:01: [io 0xffff] has been reserved [ 0.233674] system 00:01: [io 0x0400-0x0453] could not be reserved [ 0.233675] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.233676] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.233677] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.233679] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233698] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.233730] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.233731] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.233801] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.233802] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233839] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.233841] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233994] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.233996] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.233997] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.233998] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.233999] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.234001] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.234002] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.234003] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.234004] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.234005] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.234007] system 00:06: [mem 0xe0000000-0xe0000fff] has been reserved [ 0.234008] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.234079] pnp: PnP ACPI: found 7 devices [ 0.234079] ACPI: bus type PNP unregistered [ 0.239915] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.239918] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.239919] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.239939] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.239941] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.239942] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.239946] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff] [ 0.239950] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.239952] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.239954] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.239955] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.239957] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.239959] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.239961] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.239963] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.239967] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe02fffff] [ 0.239970] pci 0000:00:1c.0: bridge window [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.239974] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.239978] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff] [ 0.239985] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.239987] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.239990] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff] [ 0.239997] pci 0000:00:1c.7: PCI bridge to [bus 05] [ 0.239999] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.240003] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff] [ 0.240010] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.240011] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.240012] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.240013] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.240014] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.240015] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.240016] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.240017] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.240018] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.240019] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.240021] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.240022] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.240023] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.240024] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.240025] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff] [ 0.240026] pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.240027] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff] [ 0.240029] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.240030] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.240031] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.240032] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.240051] NET: Registered protocol family 2 [ 0.240182] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.240324] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.240524] TCP: Hash tables configured (established 65536 bind 65536) [ 0.240540] TCP: reno registered [ 0.240547] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.240577] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.240626] NET: Registered protocol family 1 [ 0.277841] pci 0000:01:00.0: Video device with shadowed ROM [ 0.277954] PCI: CLS 64 bytes, default 64 [ 0.277995] Trying to unpack rootfs image as initramfs... [ 0.583684] Freeing initrd memory: 28140K (ffff8800348fa000 - ffff880036475000) [ 0.583719] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.583720] software IO TLB [mem 0xd949d000-0xdd49d000] (64MB) mapped at [ffff8800d949d000-ffff8800dd49cfff] [ 0.583865] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.583898] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x16 [ 0.583904] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x16 [ 0.583909] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x16 [ 0.583914] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x16 [ 0.583954] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 0.583970] Scanning for low memory corruption every 60 seconds [ 0.584188] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.584208] Initialise system trusted keyring [ 0.584226] audit: initializing netlink subsys (disabled) [ 0.584237] audit: type=2000 audit(1442797253.524:1): initialized [ 0.584452] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.585407] zpool: loaded [ 0.585409] zbud: loaded [ 0.585525] VFS: Disk quotas dquot_6.5.2 [ 0.585548] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.585844] fuse init (API version 7.23) [ 0.585900] msgmni has been set to 15854 [ 0.585940] Key type big_key registered [ 0.586192] Key type asymmetric registered [ 0.586194] Asymmetric key parser 'x509' registered [ 0.586217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.586246] io scheduler noop registered [ 0.586248] io scheduler deadline registered (default) [ 0.586280] io scheduler cfq registered [ 0.586424] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.586749] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.586759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.586801] intel_idle: MWAIT substates: 0x1120 [ 0.586802] intel_idle: v0.4 model 0x3A [ 0.586802] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.586949] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.586952] ACPI: Power Button [PWRB] [ 0.586977] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.586978] ACPI: Power Button [PWRF] [ 0.587018] ACPI: Fan [FAN0] (off) [ 0.587036] ACPI: Fan [FAN1] (off) [ 0.587053] ACPI: Fan [FAN2] (off) [ 0.587071] ACPI: Fan [FAN3] (off) [ 0.587087] ACPI: Fan [FAN4] (off) [ 0.597703] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.597705] ACPI: Thermal Zone [TZ00] (28 C) [ 0.597836] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.597837] ACPI: Thermal Zone [TZ01] (30 C) [ 0.597858] GHES: HEST is not enabled! [ 0.597922] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.599220] Linux agpgart interface v0.103 [ 0.600016] brd: module loaded [ 0.600421] loop: module loaded [ 0.600513] ata_piix 0000:00:1f.2: version 2.13 [ 0.600568] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.753602] scsi0 : ata_piix [ 0.753797] scsi1 : ata_piix [ 0.753831] ata1: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19 [ 0.753835] ata2: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19 [ 0.753900] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.909433] scsi2 : ata_piix [ 0.909526] scsi3 : ata_piix [ 0.909551] ata3: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19 [ 0.909554] ata4: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19 [ 0.909607] libphy: Fixed MDIO Bus: probed [ 0.909610] tun: Universal TUN/TAP device driver, 1.6 [ 0.909611] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 0.909653] PPP generic driver version 2.4.2 [ 0.909691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.909700] ehci-pci: EHCI PCI platform driver [ 0.909786] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.909790] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.909801] ehci-pci 0000:00:1a.0: debug port 2 [ 0.913695] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.913705] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7437000 [ 0.925128] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.925162] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.925164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.925165] usb usb1: Product: EHCI Host Controller [ 0.925166] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 0.925167] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.925254] hub 1-0:1.0: USB hub found [ 0.925260] hub 1-0:1.0: 2 ports detected [ 0.925410] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.925414] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.925424] ehci-pci 0000:00:1d.0: debug port 2 [ 0.929304] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.929315] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7436000 [ 0.941128] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.941169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.941170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.941171] usb usb2: Product: EHCI Host Controller [ 0.941172] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 0.941173] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.941337] hub 2-0:1.0: USB hub found [ 0.941343] hub 2-0:1.0: 2 ports detected [ 0.941424] ehci-platform: EHCI generic platform driver [ 0.941430] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.941434] ohci-pci: OHCI PCI platform driver [ 0.941441] ohci-platform: OHCI generic platform driver [ 0.941446] uhci_hcd: USB Universal Host Controller Interface driver [ 0.941520] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.941525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.941602] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.941615] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 0.941659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.941661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.941662] usb usb3: Product: xHCI Host Controller [ 0.941663] usb usb3: Manufacturer: Linux 3.16.0-38-generic xhci_hcd [ 0.941664] usb usb3: SerialNumber: 0000:00:14.0 [ 0.941791] hub 3-0:1.0: USB hub found [ 0.941799] hub 3-0:1.0: 4 ports detected [ 0.942005] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.942007] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.942030] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.942031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.942032] usb usb4: Product: xHCI Host Controller [ 0.942033] usb usb4: Manufacturer: Linux 3.16.0-38-generic xhci_hcd [ 0.942034] usb usb4: SerialNumber: 0000:00:14.0 [ 0.942158] hub 4-0:1.0: USB hub found [ 0.942167] hub 4-0:1.0: 4 ports detected [ 0.942424] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.942428] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 1.001760] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.001763] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 1.001764] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 1.001766] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 1.001768] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 1.001852] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.001853] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.001854] usb usb5: Product: xHCI Host Controller [ 1.001855] usb usb5: Manufacturer: Linux 3.16.0-38-generic xhci_hcd [ 1.001856] usb usb5: SerialNumber: 0000:03:00.0 [ 1.001978] hub 5-0:1.0: USB hub found [ 1.001987] hub 5-0:1.0: 2 ports detected [ 1.002044] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.002046] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 1.002089] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.002090] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.002091] usb usb6: Product: xHCI Host Controller [ 1.002092] usb usb6: Manufacturer: Linux 3.16.0-38-generic xhci_hcd [ 1.002093] usb usb6: SerialNumber: 0000:03:00.0 [ 1.002215] hub 6-0:1.0: USB hub found [ 1.002224] hub 6-0:1.0: 2 ports detected [ 1.002309] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.004588] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.004591] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.004725] mousedev: PS/2 mouse device common for all mice [ 1.004892] rtc_cmos 00:02: RTC can wake from S4 [ 1.005021] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.005054] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.005094] device-mapper: uevent: version 1.0.3 [ 1.005169] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-de...@redhat.com [ 1.005179] Intel P-state driver initializing. [ 1.005208] Intel pstate controlling: cpu 0 [ 1.005241] Intel pstate controlling: cpu 1 [ 1.005253] Intel pstate controlling: cpu 2 [ 1.005261] Intel pstate controlling: cpu 3 [ 1.005277] Consider also installing thermald for improved thermal control. [ 1.005281] ledtrig-cpu: registered to indicate activity on CPUs [ 1.005354] TCP: cubic registered [ 1.005416] NET: Registered protocol family 10 [ 1.005582] NET: Registered protocol family 17 [ 1.005589] Key type dns_resolver registered [ 1.005789] Loading compiled-in X.509 certificates [ 1.006319] Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b' [ 1.006331] registered taskstats version 1 [ 1.008688] Key type trusted registered [ 1.013584] Key type encrypted registered [ 1.013588] AppArmor: AppArmor sha1 policy hashing enabled [ 1.013590] ima: No TPM chip found, activating TPM-bypass! [ 1.013601] evm: HMAC attrs: 0x1 [ 1.013976] Magic number: 15:659:3 [ 1.014092] rtc_cmos 00:02: setting system clock to 2015-09-21 01:00:54 UTC (1442797254) [ 1.014197] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.014197] EDD information not available. [ 1.014242] PM: Hibernation image not present or could not be loaded. [ 1.236915] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.369092] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.369096] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.369378] hub 1-1:1.0: USB hub found [ 1.369452] hub 1-1:1.0: 6 ports detected [ 1.384744] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 330) [ 1.393017] ata3.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133 [ 1.393021] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.401015] ata3.00: configured for UDMA/133 [ 1.480621] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.580505] tsc: Refined TSC clocksource calibration: 3410.013 MHz [ 1.612849] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.612854] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.613141] hub 2-1:1.0: USB hub found [ 1.613214] hub 2-1:1.0: 8 ports detected [ 1.780315] ata2.00: failed to resume link (SControl 30) [ 1.780328] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 1.936217] ata4: failed to resume link (SControl 30) [ 1.946842] ata4: SATA link down (SStatus 4 SControl 30) [ 1.948165] usb 3-1: device descriptor read/64, error -71 [ 2.100059] ata1.01: failed to resume link (SControl 0) [ 2.183458] usb 3-1: New USB device found, idVendor=13ee, idProduct=0001 [ 2.183463] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.183465] usb 3-1: Product: AND [ 2.183467] usb 3-1: Manufacturer: MOON [ 2.183469] usb 3-1: SerialNumber: @LAB [ 2.183599] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.255916] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.255926] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2.264180] ata1.00: supports DRM functions and may not be fully accessible [ 2.264183] ata1.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133 [ 2.264184] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.276147] ata1.00: supports DRM functions and may not be fully accessible [ 2.280645] ata1.00: configured for UDMA/133 [ 2.280840] scsi 0:0:0:0: Direct-Access ATA Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5 [ 2.281145] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.281146] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.281148] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.281223] sd 0:0:0:0: [sda] Write Protect is off [ 2.281224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.281233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.281886] sda: sda1 sda2 < sda5 > [ 2.282215] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.351771] usb 5-2: new low-speed USB device number 2 using xhci_hcd [ 2.579749] Switched to clocksource tsc [ 2.631389] usb 5-2: New USB device found, idVendor=046d, idProduct=c326 [ 2.631394] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.631396] usb 5-2: Product: USB Keyboard [ 2.631399] usb 5-2: Manufacturer: Logitech [ 2.631517] usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.631520] usb 5-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.703530] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 2.798184] usb 1-1.5: New USB device found, idVendor=058f, idProduct=9520 [ 2.798188] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.798191] usb 1-1.5: Product: EMV Smartcard Reader [ 2.798193] usb 1-1.5: Manufacturer: Generic [ 2.807307] ata2.01: failed to resume link (SControl 0) [ 2.817939] ata2.00: SATA link down (SStatus 4 SControl 30) [ 2.817950] ata2.01: SATA link down (SStatus 0 SControl 0) [ 2.818131] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 0A80 PQ: 0 ANSI: 5 [ 2.818418] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.818459] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.818460] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 2.818729] sd 2:0:0:0: [sdb] Write Protect is off [ 2.818735] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.818850] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.848828] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 2.849380] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.850041] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000) [ 2.850043] Write protecting the kernel read-only data: 12288k [ 2.850998] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000) [ 2.851852] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000) [ 2.859384] systemd-udevd[132]: starting version 204 [ 2.871829] usb 1-1.6: new high-speed USB device number 4 using ehci-pci [ 2.871972] pps_core: LinuxPPS API ver. 1 registered [ 2.871973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 2.872786] PTP clock support registered [ 2.872985] hidraw: raw HID events driver (C) Jiri Kosina [ 2.873800] ahci 0000:04:00.0: version 3.0 [ 2.873893] ahci 0000:04:00.0: irq 47 for MSI/MSI-X [ 2.873907] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled [ 2.873942] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.873944] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.874191] scsi4 : ahci [ 2.875185] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 2.875186] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 2.875298] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.875309] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 2.875751] scsi5 : ahci [ 2.875785] ata5: SATA max UDMA/133 abar m512@0xf7200000 port 0xf7200100 irq 47 [ 2.875787] ata6: SATA max UDMA/133 abar m512@0xf7200000 port 0xf7200180 irq 47 [ 2.875854] ahci 0000:05:00.0: irq 49 for MSI/MSI-X [ 2.875869] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled [ 2.875904] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.875906] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.877402] scsi6 : ahci [ 2.885790] usbcore: registered new interface driver usbhid [ 2.885792] usbhid: USB HID core driver [ 2.886147] scsi7 : ahci [ 2.886249] ata7: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100100 irq 49 [ 2.886252] ata8: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100180 irq 49 [ 2.890520] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:13EE:0001.0001/input/input5 [ 2.890600] hid-generic 0003:13EE:0001.0001: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-1/input0 [ 2.890689] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-2/5-2:1.0/0003:046D:C326.0002/input/input6 [ 2.890729] hid-generic 0003:046D:C326.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:03:00.0-2/input0 [ 2.892747] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-2/5-2:1.1/0003:046D:C326.0003/input/input7 [ 2.893017] hid-generic 0003:046D:C326.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:03:00.0-2/input1 [ 2.965271] usb 1-1.6: New USB device found, idVendor=058f, idProduct=6362 [ 2.965275] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.965278] usb 1-1.6: Product: Mass Storage Device [ 2.965280] usb 1-1.6: Manufacturer: Generic [ 2.965282] usb 1-1.6: SerialNumber: 058F63626420 [ 2.967756] usb-storage 1-1.6:1.0: USB Mass Storage device detected [ 2.967868] scsi8 : usb-storage 1-1.6:1.0 [ 2.967926] usbcore: registered new interface driver usb-storage [ 2.968766] usbcore: registered new interface driver uas [ 3.141205] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.141207] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d0:2b:25:f0:1a [ 3.141208] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.141249] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 3.194942] ata5: SATA link down (SStatus 0 SControl 300) [ 3.202943] ata7: SATA link down (SStatus 0 SControl 300) [ 3.514621] ata6: SATA link down (SStatus 0 SControl 300) [ 3.834326] ata8: SATA link down (SStatus 0 SControl 300) [ 3.966974] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 3.967598] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 3.968215] scsi 8:0:0:2: Direct-Access Generic- SM/xD Picture 1.02 PQ: 0 ANSI: 0 [ 3.968851] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 [ 3.969052] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 3.969222] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 3.969554] sd 8:0:0:2: Attached scsi generic sg4 type 0 [ 3.969723] sd 8:0:0:3: Attached scsi generic sg5 type 0 [ 3.987355] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3.988005] sd 8:0:0:1: [sdd] Attached SCSI removable disk [ 3.988630] sd 8:0:0:2: [sde] Attached SCSI removable disk [ 3.989260] sd 8:0:0:3: [sdf] Attached SCSI removable disk [ 4.930254] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.006531] random: init urandom read with 94 bits of entropy available [ 5.156014] Adding 8330236k swap on /dev/sda5. Priority:-1 extents:1 across:8330236k SSFS [ 5.268112] systemd-udevd[352]: starting version 204 [ 5.293996] lp: driver loaded but no devices found [ 5.297333] ppdev: user-space parallel port driver [ 5.340770] wmi: Mapper loaded [ 5.353405] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.354363] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 5.362092] [drm] Initialized drm 1.1.0 20060810 [ 5.367850] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258) [ 5.367855] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.367858] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 5.367860] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258) [ 5.367862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.367862] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 5.367864] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258) [ 5.367866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.367866] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 5.367868] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258) [ 5.367869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.367870] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.390564] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 5.390631] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.390635] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 5.394475] AVX version of gcm_enc/dec engaged. [ 5.405666] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.405669] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.405670] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.405671] sound hdaudioC0D0: mono: mono_out=0x0 [ 5.405672] sound hdaudioC0D0: dig-out=0x11/0x1e [ 5.405673] sound hdaudioC0D0: inputs: [ 5.405674] sound hdaudioC0D0: Front Mic=0x19 [ 5.405676] sound hdaudioC0D0: Rear Mic=0x18 [ 5.405676] sound hdaudioC0D0: Line=0x1a [ 5.410748] random: nonblocking pool is initialized [ 5.411714] kvm: disabled by bios [ 5.416582] intel_rapl: Found RAPL domain package [ 5.416584] intel_rapl: Found RAPL domain core [ 5.421706] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.421793] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.421846] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.421881] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.421987] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.422033] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.422067] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.422225] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 5.494172] asus_wmi: ASUS WMI generic driver loaded [ 5.495022] asus_wmi: Initialization: 0x0 [ 5.495035] asus_wmi: BIOS WMI version: 0.9 [ 5.495056] asus_wmi: SFUN value: 0x0 [ 5.495453] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16 [ 5.498148] asus_wmi: Disabling ACPI video driver [ 5.643096] nvidia: module license 'NVIDIA' taints kernel. [ 5.643099] Disabling lock debugging due to kernel taint [ 5.648175] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.651767] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 5.651890] [drm] Initialized nvidia-drm 0.0.0 20140818 for 0000:01:00.0 on minor 0 [ 5.651894] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014 [ 5.772010] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 5.848838] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 5.848995] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 5.849135] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 5.849273] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 5.933405] init: failsafe main process (720) killed by TERM signal [ 5.982228] Bluetooth: Core ver 2.19 [ 5.982237] NET: Registered protocol family 31 [ 5.982238] Bluetooth: HCI device and connection manager initialized [ 5.982251] Bluetooth: HCI socket layer initialized [ 5.982253] Bluetooth: L2CAP socket layer initialized [ 5.982265] Bluetooth: SCO socket layer initialized [ 5.986736] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.986737] Bluetooth: BNEP filters: protocol multicast [ 5.986742] Bluetooth: BNEP socket layer initialized [ 5.995609] Bluetooth: RFCOMM TTY layer initialized [ 5.995617] Bluetooth: RFCOMM socket layer initialized [ 5.995620] Bluetooth: RFCOMM ver 1.11 [ 6.062367] init: cups main process (833) killed by HUP signal [ 6.062374] init: cups main process ended, respawning [ 6.343764] init: samba-ad-dc main process (916) terminated with status 1 [ 6.364803] init: nvidia-prime main process (975) terminated with status 127 [ 6.447890] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 6.507317] init: plymouth-upstart-bridge main process ended, respawning [ 6.509925] init: plymouth-upstart-bridge main process (1106) terminated with status 1 [ 6.509940] init: plymouth-upstart-bridge main process ended, respawning [ 6.551711] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 6.551806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.234260] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.234319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.879244] usb 5-1: new high-speed USB device number 3 using xhci_hcd [ 28.151096] usb 5-1: New USB device found, idVendor=0424, idProduct=2512 [ 28.151100] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 28.151892] hub 5-1:1.0: USB hub found [ 28.151953] hub 5-1:1.0: 2 ports detected [ 28.422679] usb 5-1.1: new full-speed USB device number 4 using xhci_hcd [ 28.686350] usb 5-1.1: New USB device found, idVendor=10c4, idProduct=ea70 [ 28.686354] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 28.686357] usb 5-1.1: Product: CP2105 Dual USB to UART Bridge Controller [ 28.686360] usb 5-1.1: Manufacturer: Silicon Labs [ 28.686362] usb 5-1.1: SerialNumber: AH057M5I150145 [ 28.693014] usbcore: registered new interface driver usbserial [ 28.693022] usbcore: registered new interface driver usbserial_generic [ 28.693027] usbserial: USB Serial support registered for generic [ 28.694787] usbcore: registered new interface driver cp210x [ 28.694796] usbserial: USB Serial support registered for cp210x [ 28.694818] cp210x 5-1.1:1.0: cp210x converter detected [ 28.774325] usb 5-1.2: new full-speed USB device number 5 using xhci_hcd [ 29.042218] usb 5-1.1: reset full-speed USB device number 4 using xhci_hcd [ 29.045344] usb 5-1.2: New USB device found, idVendor=08bb, idProduct=29b3 [ 29.045349] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 29.045351] usb 5-1.2: Product: USB Audio CODEC [ 29.045354] usb 5-1.2: Manufacturer: Burr-Brown from TI [ 29.045493] usb 5-1.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes [ 29.046952] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-1/5-1.2/5-1.2:1.3/0003:08BB:29B3.0004/input/input21 [ 29.047195] hid-generic 0003:08BB:29B3.0004: input,hidraw3: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:03:00.0-1.2/input3 [ 29.111558] usbcore: registered new interface driver snd-usb-audio [ 29.218474] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799df48 [ 29.218479] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799df00 [ 29.218482] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799de88 [ 29.218484] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799de40 [ 29.308867] usb 5-1.1: cp210x converter now attached to ttyUSB0 [ 29.308891] cp210x 5-1.1:1.1: cp210x converter detected [ 29.309040] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 29.309058] cp210x 5-1.1:1.0: device disconnected [ 29.408324] usb 5-1.1: reset full-speed USB device number 4 using xhci_hcd [ 29.598109] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799df48 [ 29.598111] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799df00 [ 29.598113] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799de88 [ 29.598114] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799de40 [ 29.599013] cp210x 5-1.1:1.0: cp210x converter detected [ 29.686881] usb 5-1.1: reset full-speed USB device number 4 using xhci_hcd [ 29.877903] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799df48 [ 29.877908] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799df00 [ 29.877911] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799de88 [ 29.877913] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d799de40 [ 29.878973] usb 5-1.1: cp210x converter now attached to ttyUSB0 [ 29.879033] usb 5-1.1: cp210x converter now attached to ttyUSB1 [ 29.886978] cp210x ttyUSB1: failed to set baud rate to 300 [ 39.331101] init: modemmanager main process (768) killed by ABRT signal [ 39.331109] init: modemmanager main process ended, respawning [ 39.344213] cp210x ttyUSB1: failed to set baud rate to 300 [ 39.347134] cp210x ttyUSB1: failed to set baud rate to 300 [ 49.237073] cp210x ttyUSB1: failed to set baud rate to 300 [ 52.552145] init: plymouth-stop pre-start process (3613) terminated with status 1 [ 2030.600815] retire_capture_urb: 4779 callbacks suppressed **** List of CAPTURE Hardware Devices **** ( according to arecord -l ) card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 **** List of PLAYBACK Hardware Devices **** ( aplay -L ) card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 Does anyone know what the fault may be ? I have not tried a complete factory reset of my rig. -- ----------- Håken Hveem ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
