,
Rich - K1HTV
= = =
From: Christoph Berg
To: WSJT software development
Cc:
Bcc:
Date: Thu, 20 Feb 2020 16:15:04 +0100
Subject: Re: [wsjt-devel] Band change
Re: Rich Zwirko - K1HTV 2020-02-20 <
cano4n8xl2foairobtzwhsuqsezdrvk688i+aekzzoa9up-j...@mail.gmail.com>
> If you use the "Blank
s, nothing to be concerned about.
>
> 73,
> Rich - K1HTV
>
>
>
> From: "DG2YCB, Uwe"
> To:
> Cc:
> Bcc:
> Date: Thu, 20 Feb 2020 11:19:51 +0100
> Subject: [wsjt-devel] Band change @ wsjt-x: decodes of old cycle falsely
> detected/reported as from new band
>
Here is what I mean:
http://www.dg2ycb.duckdns.org/wsjt-x_band_change_bug.mp4
IMO band changes make sense most, immediately when one RX cycle has been
finished, because of course I don't want to lose the next cycle. However, in
practice this means +- 1 second before or after the end of one cycle
Re: Rich Zwirko - K1HTV 2020-02-20
> If you use the "Blank lines between decode period" option,disregard the
> data below the separating dashed line which does NOT show the band on the
> right side of the line.
The point is, if wsjtx knows there was a band change with possibly
mixed decodes, why
, DG2YCB
Von: DG2YCB, Uwe [mailto:dg2...@gmx.de]
Gesendet: Donnerstag, 20. Februar 2020 16:36
An: 'WSJT software development'
Betreff: AW: [wsjt-devel] Band change @ wsjt-x: decodes of old cycle falsely
detected/reported as from new band
Here is what I mean:
http://www.dg2ycb.duckdn
uot;DG2YCB, Uwe"
To:
Cc:
Bcc:
Date: Thu, 20 Feb 2020 11:19:51 +0100
Subject: [wsjt-devel] Band change @ wsjt-x: decodes of old cycle falsely
detected/reported as from new band
Hi Joe, Steve, Bill et al.,
I don't know if it's already known: At WSJT-X v2.1.2 0068f9 after changin
Did you rescan the adi file under the colors tab? Settings>Colors>Rescan
ADIF File.
Bobby/N4AU
--
bob...@bellsouth.net
n...@arrl.net
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
e Uwe, DG2YCB
Von: Reino Talarmo [mailto:reino.tala...@kolumbus.fi]
Gesendet: Donnerstag, 20. Februar 2020 11:53
An: 'WSJT software development'
Betreff: Re: [wsjt-devel] Band change @ wsjt-x: decodes of old cycle falsely
detected/reported as from new band
Hi Uwe,
That is feature and it
Hi Uwe,
That is feature and it is recommended to stop monitoring for the duration of
band change and erase Band activity display.
73, Reino oh3mA
From: DG2YCB, Uwe [mailto:dg2...@gmx.de]
Sent: 20. helmikuuta 2020 12:20
To: wsjt-devel@lists.sourceforge.net
Subject: [wsjt-devel] Band change
Hi Joe, Steve, Bill et al.,
I don't know if it's already known: At WSJT-X v2.1.2 0068f9 after changing
the band, remaining decodes of the old cycle are still falsely detected as
from the new band. And likely, these decodes are then also reported to PSK
Reporter or HamSpots for the wrong band. Woul
This patch was submitted Nov 2 but never applied.It comes from the bug
identified in this thread where changing the rig freq from the rig does not
adjust to the remembered power levels.
https://sourceforge.net/p/wsjt/mailman/message/36101238/
Index: mainwindow.cpp
=
This patch was submitted Nov 2 but never applied.
It comes from the bug identified in this thread where changing the rig freq
does not adjust to the remembered power levels.
https://sourceforge.net/p/wsjt/mailman/message/36101238/
Index: mainwindow.cpp
==
12 matches
Mail list logo
