Hello,
I have observed what appears to be a computer-rig communication error on
transmit. I have observed this when either using Tune or in Echo mode - I
am just setting this system up so I have spent little time transmitting in
other modes (the rig worked fine during one QSO at HF).
__
Sounds like USB power problems to me.
Do you have a powered USB hub you could hook up and test?Can you also unplug
your ethernet and see if that makes any difference? That's just a quick/easy
test to hopefully eliminate that cabling as the problem.
de Mike W9MDB
On Wednesday, December 2
Thank you for the suggestion. I do have a powered USB 3.0 hub., I just
tried it and I see the same behavior ("Bus collision...").
I don't have an ethernet cable - just a wifi card in the computer. I just
tested the radio plugging it into a front USB port away from the wifi card,
but I observe the
On 20/12/2017 13:43, Lou Crocker wrote:
Observations:
On selecting Enable Tx in Echo mode, the program keys the rig
repeatedly as expected for several cycles, perhaps from 10 s to a
minute. Then one of three things happens: 1) the program stops
transmittting without an error message, 2) the p
Bill,
Thank you so much for that advice! I shut off the CI-V transceive setting
and radio is now going through TX-RX cycles without any problems, even
with power set to a finite value. I don't know why that setting was set to
on in my radio - maybe that is the default value; I haven't used that
f
