Hi Joe :
I'm not using a shortcut to start WSPR. I double-click on wspr.bat in the
build directory :
c:\JTSDK-PY\wspr\wspr-r4522\wspr.bat
John
N6RCD
On Wed, Nov 12, 2014 at 12:27 PM, Joe Taylor j...@princeton.edu wrote:
Hi John,
N6RCD wrote:
WSPR with hamlib 3 works fine with
the
Hi John,
If your building WSPR with JTSDK-PY, your not on v2.0 or even v2.12,
your on v4.0 or, what will be in the not to distant future.
The Hamlib files are copied over, both for the install and package targets:
$(CP) -ur save WsprMod hamlib/* $(INSTALLDIR)
However, CX_Freeze sets up the
Hi John,
N6RCD wrote:
I'm not using a shortcut to start WSPR. I double-click on wspr.bat in the
build directory :
c:\JTSDK-PY\wspr\wspr-r4522\wspr.bat
OK. You're using WSPR in a way that was not intended, or planned for,
but it should be possible to make it work.
I copied the rigctl.exe
On 12/11/2014 21:38, Joe Taylor wrote:
Hi John,
Hi Joe John,
N6RCD wrote:
I'm not using a shortcut to start WSPR. I double-click on wspr.bat in the
build directory :
c:\JTSDK-PY\wspr\wspr-r4522\wspr.bat
OK. You're using WSPR in a way that was not intended, or planned for,
but it should
Hi Joe :
I copied libwinpthread-1.dll across, and now it works !
Much obliged !
John
N6RCD
On Wed, Nov 12, 2014 at 1:43 PM, Bill Somerville g4...@classdesign.com
wrote:
On 12/11/2014 21:38, Joe Taylor wrote:
Hi John,
Hi Joe John,
N6RCD wrote:
I'm not using a shortcut to start WSPR.
On 10/11/2014 15:32, KI7MT wrote:
HI BIll,
Hi Greg, John All,
On 11/10/2014 11:02, Bill Somerville wrote:
On 10/11/2014 07:15, KI7MT wrote:
Hi John,
Hi Greg John,
As you stated, Hamlib3 is unreleased software. I've not tested WSPR with
hamlib3 at all, though I build it allot for WSJT-X.
Hi Greg and Bill :
Yes, I updated the hamrig rig numbers file with the info for the ic-7100,
which comes to 370 from dipping into the code.
Running directly from the cmd window results in everything working as it
should, but from Windows, an error message
emerges with the rigctl string - the
Hi Bill :
rigctl fails when trying to set the frequency :
Error attempting to set rig frequency.
rigctl -m 370 -r COM3 -s 19200 -C data_bits=8 -C stop_bits=1 -C
serial_handshake=None F 18104600
I thought it might be a PATH issue, but a visual check on the PATH shows no
alternative rigctl, and
Hi John,
This should be separated from WSPR, though it may also pass through to
WSPR, it does not appear to be a WSPR issue yet.
Until you can connect / test rigctl / rigctld (Hamlib 1.2.15.3 or v3 aka
Bills integration) with the IC-7000 from the command line, there's not
much point in running
Hi Greg :
Ok, to clarify :
The rig is actually an IC-7100, and with the new Hamlib 3 from Bill's fork,
rigctl works fine from the cmd prompt.
The problem arises when WSPR invokes rigctl when changing bands. What I see
then is that an error
comes up in the cmd window :
Error attempting to set
Hi :
I am new to this list. I have been building WSPR using JTSDK-PY, and with a
new rig, an IC-7100, I wanted to be able to run WSPR on it with rig
control. I grabbed the latest Hamlib fork from Bill Somerville G4WJS and
built it. Having attached it to WSPR 4.0, and also the current release
Hi John,
As you stated, Hamlib3 is unreleased software. I've not tested WSPR with
hamlib3 at all, though I build it allot for WSJT-X.
I suspect, Bill or maybe some others from the HL teams, have to answer
your questions.
73's
Greg, KI7MT
On 11/09/2014 07:48 PM, john mcleod wrote:
Hi :
I
12 matches
Mail list logo