On 09/10/2019 14:14, Andy Durbin wrote:
"As I said above, a CAT reset will cause a shift to a working frequency,"
Maybe the question should be - "Why does selection of F/H mode cause a
CAT reset?"
The transition from normal mode to F/H mode is more difficult than it
should be. On some band
"As I said above, a CAT reset will cause a shift to a working frequency,"
Maybe the question should be - "Why does selection of F/H mode cause a CAT
reset?"
The transition from normal mode to F/H mode is more difficult than it should
be. On some bands monitoring the standard FT8 frequency wit
On 08/10/2019 18:16, Bill Somerville wrote:
WSJT-X does not jump to a predefined working frequency unless one is
explicitly chosen or if something (which can include making settings
changes) causes a CAT reset.
If you can provide a reproducible case of WSJT-X changing your rig's
dial frequenc
On 08/10/2019 18:02, Tim Goeppinger via wsjt-devel wrote:
Today I would like to propose changes to the user manual, and to the
instructions for Fox/Hound mode
that instruct the user to enter the frequencies for the DXpedition.
This is an unnecessary complication in the way WSJT is used. I als
Today I would like to propose changes to the user manual, and to the
instructions for Fox/Hound modethat instruct the user to enter the frequencies
for the DXpedition. This is an unnecessary complication in the way WSJT is
used. I also propose a slight modification to WSJT that makes it easie
