Re: [wsjt-devel] WSJT-X 2.3.0-rc3 sudden 6-second delay

On 20/01/2021 13:18, Josh Rovero wrote: I have .wav and .c2 files for two sequential two minute periods that show the time jump.  Ntpstat showed stratum 3, within 50 ms, at the time. Where should I send the files? -- P.J. "Josh" Rovero http://www.roveroresearch.org

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 Time Shift

Hi Josh, It would help us track the problem down if you could provide a .wav file for a case that produces the large DT values. Thanks in advance, Steve, k9an > On Jan 16, 2021, at 9:11 AM, Josh Rovero wrote: > > I have noticed this issue twice, first when running rigctld-wsjtx, second > when

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 Time Shift

Il 16/01/21 12:11, Josh Rovero ha scritto: I have noticed this issue twice, first when running rigctld-wsjtx, second when running just wsjtx. Takes several days of continuous operation before DT jumps up suddenly to 6+ se

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 Antenna Switching

Hi Josh, so we can see what is happening please put the attached file into your local configuration directory ~/.config and run a minimal test that demonstrates the issue, including two transmissions that demonstrate the repeated switching to aerial 0. Then quit WSJT-X. It will have created a

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 Antenna Switching

It shouldn't be doing that on every transmit though...just on band change. It should also be skipping that if you are in split mode. Mike W9MDB On Thursday, January 7, 2021, 09:07:00 AM CST, Bill Somerville wrote: On 07/01/2021 14:44, Josh Rovero wrote: 64-bit on Fedora Core 3

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 Antenna Switching

On 07/01/2021 14:44, Josh Rovero wrote: 64-bit on Fedora Core 32: On my FT-950, every tune/transmit cycle switches to Antenna 0, even if I have manually selected Antenna 1.  This did not happen in previous versions. FWIW, I use ANT 0 (vertical wire with elevated radials) for night-time oper

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 06/01/2021 12:53, Claude Frantz wrote: On 1/6/21 11:59 AM, Bill Somerville wrote: On 06/01/2021 10:53, Claude Frantz wrote: so that shows you have deleted the files in the debian sub-directory, was that by accident or deliberate? Hi Bill, It was not deliberate, probably by accident. N

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 1/6/21 11:59 AM, Bill Somerville wrote: On 06/01/2021 10:53, Claude Frantz wrote: so that shows you have deleted the files in the debian sub-directory, was that by accident or deliberate? Hi Bill, It was not deliberate, probably by accident. Now, I have run: $ git checkout -B master o

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 06/01/2021 10:53, Claude Frantz wrote: On 1/6/21 11:38 AM, Bill Somerville wrote: Hi Bill, I am not sure what has happened, but that directory contains a CMakeLists.txt file in both  the master branch and the wsjtx-2.3.0-rc3 tag. Looks like something has gone wrong with your local clone o

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 1/6/21 11:38 AM, Bill Somerville wrote: Hi Bill, I am not sure what has happened, but that directory contains a CMakeLists.txt file in both  the master branch and the wsjtx-2.3.0-rc3 tag. Looks like something has gone wrong with your local clone of the WSJT-X repository. What does this pri

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 1/6/21 8:36 AM, Claude Frantz wrote: After having disabled the Debian stuff in CMakeLists.txt, the building process runs up to this output: [ 87%] Generating man/man1/rigctlcom-wsjtx.1.gz a2x: ERROR: "xsltproc" -param man.endnotes.list.enabled 0 -param man.endnotes.are.numbered 0 --stringp

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 06/01/2021 07:36, Claude Frantz wrote: On 1/5/21 11:30 PM, Dave Slotter wrote: Hi Dave, Bill and all, Unfortunately, I was not successful while trying to install from the source code from the git repo. Here is the output: $ make -- ** --

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On 1/5/21 11:30 PM, Dave Slotter wrote: Hi Dave, Bill and all, Unfortunately, I was not successful while trying to install from the source code from the git repo. Here is the output: $ make -- ** -- Building for for: Linux-i686 -- **

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Compiled without errors and running in Kubuntu 18.04. 73 -Jim NU0C On Tue, 5 Jan 2021 09:41:57 -0500 Joe Taylor wrote: > The third public candidate release of WSJT-X 2.3.0 is now available for > download and use by beta testers. ___ wsjt-devel

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

I got that message with -j 1 :-) Increasing the VM RAM size solved it. -- Dave Slotter, W3DJS On Tue, Jan 5, 2021 at 6:19 PM Jeff Stillinger via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > "c++: fatal error: Terminated signal terminated program cc1pl

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

"c++: fatal error: Terminated signal terminated program cc1plus " That is actually an out of memory error.   Either not enough ram or swap space to handle all of the multiple parallel processes going on during compilation. Use   make -j 4   instead to reduce the number of parallel processes

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Adrian, Excellent question. I don't see a memory issue with dmesg, but I only have 1.5GB RAM allocated to the virtual machine. I've increased memory to 2.0GB RAM and it succeeded this time. Thank you for pointing out what should have been obvious to me. :-) -Dave On 1/5/2021 5:45 PM, Adrian

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Does dmesg show an 'out of memory' condition when this occurs ? On 6/1/21 8:30 am, Dave Slotter wrote: fatal error: Terminated signal terminated program cc1plus ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Bill, et al: I'm trying to update my Linux build script to include support for Linux Mint and Fedora. I've been successful with Mint, because it's a Debian / Ubuntu offshoot and very similar to what I was doing before. However, building with Fedora is a slightly different beast. During the bui

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 - wsjtx_app_version utility

gt; another TAB moves to > the [tx2] button, next TAB move to the tx2 input, followed by a TAB to the > tx4 input. > Just an FYI > > 73, > > Sam W2JDB > > > > -Original Message- > From: Black Michael > To: wsjt-devel@lists.sourceforge.net ; Sam > W2

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 - wsjtx_app_version utility

input. Just an FYI 73, Sam W2JDB -Original Message- From: Black Michael To: wsjt-devel@lists.sourceforge.net ; Sam W2JDB Sent: Tue, Jan 5, 2021 4:12 pm Subject: Re: [wsjt-devel] WSJT-X 2.3.0-rc3 - wsjtx_app_version utility C:\WSJT\wsjtxrc3\bin>wsjtx_app_version.exe -vWSJT-X 2.3.0-rc

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 - wsjtx_app_version utility

C:\WSJT\wsjtxrc3\bin>wsjtx_app_version.exe -vWSJT-X 2.3.0-rc3 C:\WSJT\wsjtxrc3\bin>wsjtx_app_version.exe --helpUsage: wsjtx_app_version.exe [options] Options:  -?, -h, --help  Displays help on commandline options.  --help-all      Displays help including Qt specific options.  -v, --version   Disp

Re: [wsjt-devel] WSJT-X 2.3.0-rc3 - wsjtx_app_version utility

Hi Joe, Notice this line in the release notes:  - wsjtx_app_version: new utility to print application version string. Did not find any instructions so I tried to use it. Did not see any output. Tried redirecting output to a text file  : wsjtx_app_version >version.txt but that file was empty. 73,

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Hello all, I have updated a BASH script for automated updating WSJT-X from source. The script is compatible with Ubuntu and Raspberry Pi OS, but can easily be modified for Fedora, Mint, etc. Find the BASH script on GitHub here: https://github.com/dslotter/ham_radio_scripts/blob/main/update_wsjtx_

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Hi Joe, it works for me, maybe Joe has fixed it. 73 Bill G4WJS. On 05/01/2021 17:08, Joe Wittmer wrote: All well here. Thank you! FYI… I noticed that this url http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.3.0-rc3.html#_bug_reports results in a 404 page not found error

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

All well here. Thank you! FYI… I noticed that this url http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.3.0-rc3.html#_bug_reports results in a 404 page not found error. 73 Joe K9SZ > Please report bugs by following instructions found here in the User Guide: > > On Jan 5

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

On Tue, Jan 5, 2021 at 10:00 AM jarmo wrote: > Tue, 5 Jan 2021 09:41:57 -0500 > Joe Taylor kirjoitti: > > > The third public candidate release of WSJT-X 2.3.0 is now available > > for download and use by beta testers. Changes from the second > > release candidate include an improved FST4W decod

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Thanks Joe. FYI I've successfully downloaded, installed and have just had my first FT8 QSO with rc-3. I also checked the ALL.TXT file and the formatting is correct. Thanks again. __ Dan - K4SHQ CFI/II -Original Message- From: Joe Taylor Sent: Tuesday, January 5, 2021 8:42 A

Re: [wsjt-devel] WSJT-X 2.3.0-rc3

Tue, 5 Jan 2021 09:41:57 -0500 Joe Taylor kirjoitti: > The third public candidate release of WSJT-X 2.3.0 is now available > for download and use by beta testers. Changes from the second > release candidate include an improved FST4W decoder and fixes for > several defects and regressions. Additi