---
drivers/irqchip/irq-bcm2835.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index bf8c9d4..8a1b729 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -115,6 +115,7 @@ static struct irq_chip
On 4/2/2018 11:51 AM, Philippe Gerum wrote:
On 04/02/2018 06:11 PM, Steve Freyder wrote:
On 4/2/2018 10:20 AM, Philippe Gerum wrote:
On 04/02/2018 04:54 PM, Steve Freyder wrote:
On 4/2/2018 8:41 AM, Philippe Gerum wrote:
On 04/01/2018 07:28 PM, Steve Freyder wrote:
Greetings again.
As I
Tested on zynq zybo and microzed, the demo works. I built it from stable using
the 4.14 ipipe-arm repo and modprobed the module at boot. Are you using a
module or building it into the kernel?
-Greg
Original Message
From: r...@xenomai.org
Sent: April 8, 2018 12:18 PM
To:
On 04/06/2018 04:00 PM, Greg Gallagher wrote:
> I'll look into it this weekend and see if I can get the demo running
> on Zynq or one of my boards.
>
> On Thu, Apr 5, 2018 at 9:25 AM, wrote:
>> Quoting Philippe Gerum :
>>>
>>>
>>> You need to enable
On 04/07/2018 09:22 PM, Jerry W. Rice wrote:
> On the Code I-Pipe patch down-load page for Arm-64, the more recent Arm-64
> patches are placed in the 'older' (lower page), and the older patches are
> shown on the outer (top) page.
>
Fixed, thanks for the heads-up.
>
>
> (Thanks for the all
On 04/05/2018 03:25 PM, Philippe Gerum wrote:
> On 04/05/2018 01:39 PM, Giulio Moro wrote:
>> Thanks and sorry for overlooking that. I thought if there was some docs on
>> xeno-config it would have been inlined in its source, so that is where I
>> looked for it. I guess the man folder should
Module: xenomai-3
Branch: stable-3.0.x
Commit: e28d2631154d26e00715a5ef0f952ceb5df7ef59
URL:
http://git.xenomai.org/?p=xenomai-3.git;a=commit;h=e28d2631154d26e00715a5ef0f952ceb5df7ef59
Author: Philippe Gerum
Date: Sun Apr 8 17:38:23 2018 +0200
lib/cobalt: document