Hi,
> > I build a new kernel with the Xenomai + COmedi trunk and also added
> > XENO_DRIVERS_COMEDI_FAKE AND LOOP but it seems that the Segmentation
> > Fault is still an open problem. So after compiling my kernel I manually
> > copied the libs (libcomedi.so, librtdm.so) in my target's /lib
>
> >OK. You are not supposed to use the branch comedi-rtdm-dev. The
> comedi4rtdm
>
>> >>code has been integrated in the trunk.
>>
>>
>> >>Could you check whether you have the same problem with the trunk code ?
>> The NI
>> >>driver is not integrated into the trunk; it was not validated.
>> >>Instea
Hi,
> >> Where did you get the modules ni_mite.ko ni_pcimio.ko ? Did you perform
> >> the
> >> porting or did you use the version I made (as POC) ? If you use mine,
> >> take great care: as I have no NI acquisition card, I was unable to
> >> validate the drivers (that is the reason why the driver
Hi,
> I have some questions regarding the use of Comedi over Xenomai .So I have
> developed a distributed control application using Comedi over RTAI on x86
> and now I have to port it to Xenomai on PPC ARCH and NI PCI 6024E DAQ card.
> My question is regarding my current status, so I have a linux
Hello!
I have some questions regarding the use of Comedi over Xenomai .So I have
developed a distributed control application using Comedi over RTAI on x86
and now I have to port it to Xenomai on PPC ARCH and NI PCI 6024E DAQ card.
My question is regarding my current status, so I have a linux kernel