Hi,
> I have problem running my Cirrus Logic
> card at 800x600 and 16-bit color.
You should read your log file:
[del]
> (II) CIRRUS(0): Not using default mode "800x600" (insufficient memory given
> virtual size)
> (II) CIRRUS(0): Not using default mode "800x600" (insufficient memory given
> virtu
Helo,
I am trying to detect wether a screen is plugged or not, and what is it's
type, name, vendor etc..
I know 'xfree86 -configure' could do that but I only need the detection
part..
Futhermore, someone has said to me that it was also possible to control the
power on/off of the screen via dvi po
> You should read your log file:
I've done so, but 800x600 at 16 bits color gives 960kB, while
my card has 1024. Anyway thank you.
Leszek Dubiel
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Matlab crashed.
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer ve
'mail delivery (failure [EMAIL PROTECTED])' tárgyú levél message.scr csatolmánya
I-Worm.Netsky.Q vírust tartalmazott.
Attachment was deleted.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
"Leszek Dubiel"
>
> > You should read your log file:
>
> I've done so, but 800x600 at 16 bits color gives 960kB, while
> my card has 1024. Anyway thank you.
Then it's detected wrong. Try to set it hard in the config file,
HTH,
Uli
--
Ulrich Teichert, IDF EUROPE, Obenhauptstrasse 11, 22335 Ha
Dear Sir/madam
Whenever i move the mouse, my
xwindow halt...
I am using redhat
7.3 with acer 2 button PS/2 mouse
Please help me
Thx
Blow me
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, April 18, 2004 8:21 PM
Subject: ello! =))
> Looking forward for a response :P
>
> pass: 46130
>
___
XFree86 mailing list
[EMAIL PROTECTED]
http://
Hi all,
I'm new to this list so hello to all!
To my xfree problem: I'm working on this for three days now and I
think that it is time to come to you with it:
I just wanted to programm opengl with the GLUT API. Everything just worked
allright (programming-compile-execute) until I reinstalled my l
Hi!
I'm trying to get a secondary graphics adapter to work.
My primary adapter is a nVidia which I conf'd to use tv-out too, like this:
--- XFConfig-4 - snip ---
Section "Device"
Identifier"nvidia0"
Driver"nvidia"
BusID"PCI:1:0:0"
Screen 0
EndSection
Section
Hi There,
I'm not able to startx my linux box. The error message from
/var/log/XFree86.0.log is pasted below for your reference.
Please help.
With Warm Regards,
Atul Tyagi
>
> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
> (protocol Version 11, revision 0, vendor r
Hi,
I am trying to detect the screen type BEFORE X has started (in order to
change the XF86Config witch works well with a screen or another)..
Does anybody know how could I do discover the screen type, vendor etc.. ?
Thanks.
Thibault ketterer
[EMAIL PROTECTED]
_
Hi
my gess:
> > (II) Primary Device is: PCI 00:02:0
> > (EE) No devices detected.
ok, looks like your graphic device hasn't got the PCI adress 00:02:0.
> > Fatal server error:
> > no screens found
and seems like if you haven't specified a screen in your XF86Config
for better analysis please inc
Dear Sir
My x windows is not starting due to some problem (can't start the x server).
I am sending the full /var/log/XFree86.0.log file with this mail. Can you
help me to fix the problem?
Note:
My display adapter is: sis 300/305
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date
Helo,
Try add/change "DefaultColorDepth" to 16 or less (15, 8)
In the "Screen" section
_
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Envoyé : lundi 19 avril 2004 16:40
À : [EMAIL PROTECTED]
Objet : [XFree86] HELP ME
Dear Sir
My x windows is not starting due
Dear XFree86-Experts,
I just installed Version 4.4.0 on a Dell Inspiron 8000 and
nearly everything works fine. I can even switch between the
resolutions
Modes "1400x1050" "1024x768" "800x600" "640x480"
This was the reason for the update from Version 4.2. because
I need to work with a pro
patrick boenzli wrote:
HW and SW datas:
Sony VAIO PCG-SR11K:
S3 Savage IX-MV, 8MB
Hardware accelerated 3D is not supported by any current X release on
that graphics chip. However, there is a driver in development. Please
look at:
http://dri.sourceforge.net/cgi-bin/moin.cgi/S3Savage?action=h
Jarrod Wilkes wrote:
> I am running Debian Linux on a new IBM laptop. The video card is the ATI
> FireGL T2 128MB. I looked through the documentation and it doesn't seem
Which version of XFree86 are you running? Debian 3.0 'woody' (stable) was
running a rather dated version the last time I checked
chung wrote:
> Whenever i move the mouse, my xwindow halt... I am using redhat 7.3 with acer
> 2 button PS/2 mouse
Can you give us more details, like your configuration file (/etc/X11/XF86Config)
and the log file (/var/log/XFree86.0.log)?
BTW: Red Hat Inc. is no longer supporting Red Hat Linux 7.
Frans Andersson wrote:
> Section "Device"
>Identifier"s3kortet"
>Driver"s3virge"
>BusID"PCI:0:13:0"
>Screen2
> EndSection
>
> My log says:
>
> --- XFree86.0.log - snip ---
> (WW) S3VIRGE: No matching Device section for instance (BusID PCI:0:13:0)
> fou
Andreas Krebs wrote:
> Now, I would like to get rid of the virtual resolution 1400x1050
> when I am working with 1024x768.
> Is there a way to switch the virtual resolution on the fly or
> do I need to start a second Xserver.
If I understand your request, yes. You just need to simplify your Secti
Matti Vuorinen wrote:
> Matlab crashed.
Because your XF86Config has some serious problems.
> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 23 January 2002
This is very old.
> (II) LoadModule: "gl
I did the following modification, but it still the same:
The virtual res. remains 1400x1050 when switching to the lower
resolution, i.e., moving the mouse to display's border shows the hidden
part of the 1400x1050 virtual pixels. Thanks Andreas
Section "Screen"
# DefaultDepth 16
SubSection "D
Thibault Ketterer wrote:
Helo,
Try add/change "DefaultColorDepth" to 16 or less (15, 8)
In the "Screen" section
No, wrong. Change Driver "vga" to "sis".
Thomas
_
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Envoyé : lundi 19 avril 2004 16:40
À : [EMAIL PROT
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Does somebody uses the i810 driver with dual-screen on a laptop please ? i
can't make it work :(
Thanks
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAhAkyH6AppSifBIcRAmdWAKCwHc8kCbtXxXAblv6gA9xrhfIsagCgpnzE
JcMZUBogW/HQvqs2
Edwin Lee wrote:
...
> 3. Successful installation has been shown.
> 4. Continue to run into login screen and a window prompt of X cannot be loaded
> occurs.
> 5. Choose "yes" to run the configuration with lots of Monitor and Display type that
> I can select.
>
> I try many different combination;
Demon wrote:
> Hello, xfree86.
> Как восстановить рабочие состояние?
>
> (==) Using config file: "/etc/X11/XF86Config-4"
> Data incomplete in file /etc/X11/XF86Config-4
> Undefined Monitor "Monitor0" referenced by Screen "Screen0".
You need to fix this error. There is no Monitor section c
Michael Taylor wrote:
Frans Andersson wrote:
Section "Device"
Identifier"s3kortet"
Driver"s3virge"
BusID"PCI:0:13:0"
Screen2
EndSection
My log says:
--- XFree86.0.log - snip ---
(WW) S3VIRGE: No matching Device section for instance (BusID PCI:0:13:0)
found
Frans Andersson wrote:
> Michael Taylor wrote:
>
>> Frans Andersson wrote:
>>
>>
>>
>>> Section "Device"
>>> Identifier"s3kortet"
>>> Driver"s3virge"
>>> BusID"PCI:0:13:0"
>>> Screen2
>>> EndSection
>>>
>>> My log says:
>>>
>>> --- XFree86.0.log - snip ---
>>>
On Mon, Apr 19, 2004 at 03:28:52PM -0400, Perry James D NPRI wrote:
> Hello:
> My name is James Perry and I am an electrical engineer for the
> Naval Undersea Warfare Center, Division Newport, Newport RI. I
> am sending this email on the suggestion at the end of the log
>
Michael Taylor wrote:
Section "Device"
Identifier"s3kortet"
Driver"s3virge"
BusID"PCI:0:13:0"
Screen2
EndSection
My log says:
--- XFree86.0.log - snip ---
(WW) S3VIRGE: No matching Device section for instance (BusID PCI:0:13:0)
found
00:0d.0 VGA compatib
It works now.
I'm not quite sure of what I did, but here's the correct XF86Config part:
---
Section "Device"
Identifier "nvidia0"
Driver "nvidia"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "nvidia1"
Hello,
I have been trying to figure out how OpenGL works with
X. Basically this is what I think
know:
If you have drivers from your video card manufacturer then
they usually supply an OpenGL library with all the appropriate OpenGL
functions.
If you do NOT have drivers from the man
Frans Andersson wrote:
It works now.
I'm not quite sure of what I did, but here's the correct XF86Config part:
---
Section "Device"
Identifier "nvidia0"
Driver "nvidia"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identif
On Mon, Apr 19, 2004 at 07:07:24PM -0400, Samuel Winchenbach wrote:
> When I installed slackware 9.1 how did I get the GLU library? Is it
> something that came with XFree?
Yes. GLU is just a utility library used by apps, that makes OpenGL
calls. There's nothing in there you can't write in you
Wow. I am starting to think perhaps I should just use it and not
question how it works. So basically GLX is very important to using
OpenGL in X. It looks like it performs multiple duties (nice SNL
reference) and is critical to the implementation of hardware accelerated
3d graphics in X. I am us
Much of that info is available through DDC. For the most
part, monitor EDID information is acquired through DDC via
the chip's I2C port. In general, I2C access is proprietary to
the video chip, but there may be some VESA services exporting
that. Whether there are utilities that do that outsid
From: wendie Coulman <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Reply-To: <[EMAIL PROTECTED]>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: plain
X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on public.xfree86.org
X-Spam-Status: No, hits=5.3 requi
Dear sir,
I installed RH linux 8.0 in my machine. But
now I can't get the display. I am sending the system details. Please help
me.
P4 1.70, Mother Board : Intel D845GLAD, HDD 40 GB,
RAM : 256 MB.
With regards
jayan
On Mon, Apr 19, 2004 at 11:12:38PM -0400, Samuel Winchenbach wrote:
> Wow. I am starting to think perhaps I should just use it and not
> question how it works.
Pay no attention to the man behind the curtain.
> So basically GLX is very important to using
> OpenGL in X. It looks like it perfo
40 matches
Mail list logo
