XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com
Before reporting problems, check
hi everyone please help me
I have debian (woody) installed and I picked the x window system in
dselect and it installed, but when i type in exec startx it runs and
then it quits and says no display found or something like that. At the
top it says display found not configured or something like
: Wednesday, October 06, 2004 3:13 PM
Subject: RE: [XFree86] DISPLAY PROBLEM - 82845 Chipset.
Type Xconfigurator and follow onscreen instructions for reconfiguring
your display card and everything will work out fine. Soon after just
restart your computer and not just the service but the reboot
] [mailto:[EMAIL PROTECTED] On
Behalf Of Rajasekar G[JESUMA-TPT]
Sent: Thursday, October 07, 2004 7:56 AM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] DISPLAY PROBLEM - 82845 Chipset.
I have configured my X windows as like Mr.Callisto instructed and it is
working fine.
Thanx Mr.Callisto
Regards
of the information
contained in this message.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Pieter Hulshoff
Sent: Tuesday, October 05, 2004 7:52 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] DISPLAY PROBLEM - 82845 Chipset.
On Tuesday 05 October
Sir,
Kindly see the attached 2 files again. As per your instruction i
have added the line in monitor section. But is of no use. Unable to
get the X.
regards,
- JAGDISH
On Tue, 5 Oct 2004, Pieter Hulshoff wrote:
On Tuesday 05 October 2004 07:01, Jagdish R.Chhailkar wrote:
On Tue, Oct 05, 2004 at 12:31:30PM +0530, Jagdish R.Chhailkar wrote:
How should I turn off the auromatic settings gathering from my
moniror ?
I'm not sure to be honest. I'm hoping the removal of the dpms setting
will also take care of this part. Anyone on the list care to lend a
hand
On Tue, 5 Oct 2004, Pieter Hulshoff wrote:
On Tue, Oct 05, 2004 at 11:39:50AM +0530, Jagdish R.Chhailkar wrote:
Kindly see the attached 2 files again. As per your instruction i
have added the line in monitor section. But is of no use. Unable to
get the X.
Hmm, I'm starting to run
On Tuesday 05 October 2004 19:40, Mark Vojkovich wrote:
i845 support wasn't even added until after 4.2.0. #129 in the changelist
for XFree86 4.2.99.1 (7 June 2002). He's not going to get it working
with anything older than 4.3.0. Playing with modelines is just a waste
of time. Jagdish, you
Sir,
I have a machine having 128MB DDR,40GB HDD and 15 Samsung's
SyncMaster 591s monitor. Out of 40GB i have partitioned 30GB as DOS
10GB as NON-DOS. Over the 10GB non-dos partition I am trying to load the
Red Hat Linux 8.0. I have successfully loaded the OS but unable to get
the
Sir,
I have a machine having 128MB DDR,40GB HDD and 15 Samsung's
SyncMaster 591s monitor. Out of 40GB i have partitioned 30GB as DOS
10GB as NON-DOS. Over the 10GB non-dos partition I am trying to load the
Red Hat Linux 8.0. I have successfully loaded the OS but unable to get
On Mon, Oct 04, 2004 at 01:06:20PM +0530, Jagdish R.Chhailkar wrote:
For the ready reference I am enclosing the complete log file
(i.e. XFree86.0.log) from /var/log and the output of the lspci -v
command.
(EE) Screen(s) found, but none have a usable configuration.
Would you mind
Sir,
Pl. find enclosed herewith the Xf86Config file. In which i have
tried for 1024x768. It doesn't worked for me hence i tried for the lower
step by step i.e. 800x600 then 640x480.
regards,
- JAGDISH.
On Mon, 4 Oct 2004, Pieter Hulshoff wrote:
On Mon, Oct 04, 2004 at
Sir,
Just now i have reloaded the Os. While loading the system is
detecting as Intel 845 the monitor is SyncMaster. For the
installation purpose the X is coming. But after completion of the os
loading i am unable to get the X.
For you ready reference i have enclosed the
On Mon, Oct 04, 2004 at 01:06:20PM +0530, Jagdish R.Chhailkar wrote:
For the ready reference I am enclosing the complete log file
(i.e. XFree86.0.log) from /var/log and the output of the lspci -v
command.
After looking at your configuration file I had another look at the
logfile.
Sir,
Pl. find enclosed herewith the files. Now i am getting the error
as failed to load Module i845 .
regards
- JAGDISH.
On Mon, 4 Oct 2004, Pieter Hulshoff wrote:
On Mon, Oct 04, 2004 at 03:29:02PM +0530, Jagdish R.Chhailkar wrote:
For you ready reference i have enclosed
On Mon, Oct 04, 2004 at 04:49:54PM +0530, Jagdish R.Chhailkar wrote:
Pl. find enclosed herewith the files. Now i am getting the error
as failed to load Module i845 .
I believe the module is called i810. Just change that part of the device
settings, and resend the output.
Regards,
Sir,
Pl. find the new files. Still the problem continues.
regards
- JAGDISH
On Mon, 4 Oct 2004, Pieter Hulshoff wrote:
On Mon, Oct 04, 2004 at 04:49:54PM +0530, Jagdish R.Chhailkar wrote:
Pl. find enclosed herewith the files. Now i am getting the error
as failed to load
On Mon, Oct 04, 2004 at 05:57:16PM +0530, Jagdish R.Chhailkar wrote:
Pl. find the new files. Still the problem continues.
(II) I810(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
It appears you have not yet set the image size of your monitor as I
described in a previous email. 28x21 cm
Your XFree86 version is too old to support i845. If I recall
correctly, it was not supported until 4.3.0. 4.4.0 is the most
recent version.
Mark.
On Mon, 4 Oct 2004, Jagdish R.Chhailkar wrote:
Sir,
I have a machine having 128MB DDR,40GB HDD and
Sir,
I have a 15 monitor. In which file shall I have to set the horiz
vert size ?.
regards,
- JAGDISH
On Mon, 4 Oct 2004, Pieter Hulshoff wrote:
On Mon, Oct 04, 2004 at 05:57:16PM +0530, Jagdish R.Chhailkar wrote:
Pl. find the new files. Still the problem continues.
(II)
On Tuesday 05 October 2004 07:01, Jagdish R.Chhailkar wrote:
I have a 15 monitor. In which file shall I have to set the horiz
vert size ?.
I already wrote that in a previous email, but for 15 the reported values
sound about right, so there's no need for additional settings in the X
Hi Guys,
I have just installed RH9 on my IBM Netvista PC which is having Intel 845
chipset. But it looks like the display is not configured properly. For ex I
open 2 windows and select one window, the second window shows me in the Red
and Green and Bluish color. I have attached the config and log
I have a prob with display when I install RH9 on my IBM netvista Mod 6824
with i845 chipset. It works fine when I choose a lower resolution. But the
display become bigger. When I choose the higer Resolution the display
becomes small and not clear. Pls solve this issue. I have attached the log
Hello everybody.
Recently i installed Redhat linux 8.0 on MSI Motherboard which has intergrated S3
Prosavage 2d/3d display card.The problem is i am not able to Boot linux in to GUI
mode.Can pls any body tell me how to congfigure s3 in linux.
Regards,
chandu.
chandra sekhar wrote:
Hello everybody.
Recently i installed Redhat linux 8.0 on MSI Motherboard which has
intergrated S3 Prosavage 2d/3d display card.The problem is i am not able to
Boot linux in to GUI mode.Can pls any body tell me how to congfigure s3 in
linux.
Please include the log
I know that this forum is only for discussingxfree86 server problems but can you help with this error, please.Canyou tell mein which file dothe display variable have to be put?
I get a "cannot find display:"error when i try to start any X basedapplication like xcalc or xclock for example. BT
Hi,
I have installed Linux 7.3 in my system.
My system's display card is Acer 713.
The X-windows comes up for the first time and then after i logout it dosent
work. The screen goes blank. I have to reboot the system to start X-Windows
again. I tried to reconfigure the X-windows from the
On Fri, 28 Nov 2003, Prabhu Basavalingam wrote:
I have installed Linux 7.3 in my system. My system's display card is
Acer 713.
Acer713 is monitor type. Find out the video card detail (man lspci).
Presently intel 810 driver module is used. I hope, this module may not
be the right modules.
hello sir/madam,
i had successfully installed slackware linux 9.0 on my system .after completing the installation process when system reboots then it asks for login and password after entering it comes to dollar prompt there i say startx then it is giving error that is
(EE) screen found but none
hello sir/madam,
i had successfully installed slackware linux 9.0 on my system .after completing the installation process when system reboots then it asks for login and password after entering it comes to dollar prompt there i say startx then it is giving error that is
(EE) screen found but
Quoth tukaram raghmod:
i had successfully installed slackware linux 9.0 on my system .after
completing the installation process when system reboots then it asks for
login and password after entering it comes to dollar prompt there i say
startx then it is giving error that is (EE) screen found
Note that the Intel 845G isn't expected to work before XFree86 4.3.
I don't know what version comes with slackware 9.0, but if it's older
than 4.3, that would be a problem.
Mark.
On Sun, 12 Oct 2003, tukaram raghmod wrote:
hello sir/madam,
i had successfully
Hi
I am trying to install redhat 9.0 to my HP machine,
however I have got a problem to start X.
it says
(EE)No devices detected
Fatal server error
no screen found
I send log file with the attachment.
if you help me out I will be happy
thanks
Dr. Mithat Kaya
__
Do
i'm using intel's 845GLLY motherboard and not able to configure the display proerly.
I've 7cd's with me. After the preliminary installation process ie, after two cd's í
couldn't continue the installation process and getting the text mode only.
and one more when booting from the first CD it's
Hi,
I am using 3dfx voodoo 3000 AGP card and I can not go to my x window.
Here is the log file
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
36 matches
Mail list logo
