Re: [XFree86] no screens found !!!

2006-03-20 Thread Mark Vojkovich
The logfile implies that the XF86Config-4 file is configured to use a framebuffer device (Driver "fbdev"), however, the kernel does not support (or no longer supports) a framebuffer device. You might want to try changing to the i810 driver (Driver "i810" in the Section "Device" in the XF86Config

[XFree86] no screens found !!!

2006-03-20 Thread abhilash tiwari
  hi i am facing this very strange problem since my mom accidentally shut off the Laptop ...it was running mandrake linux 10.0 and i was in KDe and mom put it off even before it could turn off so now when i am startting the x server it says no screens foundi tried to figure out a way out o

Re: [XFree86] "no screens found"

2005-06-14 Thread Andrew Haninger
On 6/14/05, Lech Pańkowski <[EMAIL PROTECTED]> wrote: > Probably you are right. The point is that I would like to make as few > changes as possible (preferrebly none) to the kernel and the whole > environment. > The whole story started as I wanted to make a series of tests to my running > Linux ser

Re: [XFree86] "no screens found"

2005-06-13 Thread Andrew Haninger
On 6/13/05, Lech Pańkowski <[EMAIL PROTECTED]> wrote: > (EE) I810(0): AGP GART support is not available. Make sure your kernel has > agpgart support or that the agpgart kernel module is loaded. Maybe you need a kernel with agpgart? -Andy ___ XFree86 m

[XFree86] "no screens found"

2005-06-13 Thread Lech Pańkowski
Hi, After installing XFree86 4.5.0 (no extensions) downloaded from ftp://ftp.xfree86.org/pub/XFree86/4.5.0/binaries/Linux-ix86-glibc22/ using your Xinstall.sh script on my Linux (Debian 3.0) I can't start X. There were no error messages during installation. The onboard video display is reporte

[XFree86] "no screens found"

2005-06-10 Thread Lech Pańkowski
Dear Sirs, After installing XFree86 4.5.0 (no extensions) downloaded from ftp://ftp.xfree86.org/pub/XFree86/4.5.0/binaries/Linux-ix86-glibc22/ using your Xinstall.sh script on my Linux I (Debian 3.0) can't start X. There were no error messages during installation. The onboard video display is r

Re: [XFree86] no screens found

2005-04-26 Thread Mark Vojkovich
You need to upgrade software. Your XFree86 version is from 2001. Glancing through the release notes, I see the SiS 650 was supported starting about XFree86 4.3.0 in early 2003. Mark. On Mon, 25 Apr 2005, KRASSI KRUMOV wrote: > This log is from my laptop: MiTAC 8640

[XFree86] no screens found

2005-04-25 Thread KRASSI KRUMOV
This log is from my laptop: MiTAC 8640, Pentium 4M 2.4GHz, 256MB DDR333, Video: SiS 650 (sis driver), 14.1 LCD screen. I have attached the log. The machine works fine with Knoppix, but never gets to gui in Debian. Any help will be appreciated. Krassi

Re: [XFree86] No Screens Found.

2005-02-28 Thread jayjwa
On Tue, 22 Feb 2005, Jithin Girish wrote: -> I am using Xfree86 4.0.2, on a MIPS based board running Montavista Linux 2.0. I was able to compile and install TinyX on my system. Now when i try to invoke the Graphics System ,with the command "/usr/X11R6/bin/Xfbdev" i am getting the following error

[XFree86] No Screens Found.

2005-02-21 Thread Jithin Girish
Hi, I am using Xfree86 4.0.2, on a MIPS based board running Montavista Linux 2.0. I was able to compile and install TinyX on my system. Now when i try to invoke the Graphics System ,with the command "/usr/X11R6/bin/Xfbdev" i am getting the following error:   root@(none):/xc#  /usr/X11R6/bin/

Re: [XFree86] No screens found ...Intel 845G/GV..

2004-12-08 Thread Mark Vojkovich
If I recall correctly, the 845G was supported in the i810 driver, but not until XFree86 4.3.0. Mark. On Wed, 8 Dec 2004, Jagdish R.Chhailkar wrote: > Sir, > > Kindly let me know where i am wrong. I have attached the log file > Alongwith i have also atta

[XFree86] No screens found ...Intel 845G/GV..

2004-12-07 Thread Jagdish R.Chhailkar
Sir, Kindly let me know where i am wrong. I have attached the log file Alongwith i have also attached the o/p of lspci and scanpci. I have a PIV machine having 128MB DDR, 40 GB machine. I am not getting the GUI screen. I have tried the i810, 845 as wel

Re: [XFree86] no screens found

2004-12-01 Thread Thomas Winischhofer
Melissa Golter wrote: To Whom It May Concern ;] While installing RH7.3 (yes, I know, it is old, but i need to run an application; each newer linux version has its own bug when running it, so, RH7.3 is still OK) I made the mistake of not testing when I changed 16 bit color to true color -- I forgot

Re: [XFree86] no screens found

2004-11-30 Thread Mark Vojkovich
You might have better luck with the sis driver. Replace Driver "vesa" with Driver "sis" in the XF86Config file. Mark. On Tue, 30 Nov 2004, Melissa Golter wrote: > > To Whom It May Concern ;] > > While installing RH7.3 (yes, I know, it is old, but i need to run an > application

Re: [XFree86] no screens found

2004-07-19 Thread Mark Vojkovich
(--) PCI:*(0:18:0) ARK Logic Inc 2000PV [Stingray] rev 0, Mem @ 0xe600/22, B IOS @ 0xe500/16 I think you want to be using the "ark" driver with that card. Ie. replace Driver "vga" with Driver "ark" in the /etc/X11/XF86Config file. Mark. On Mon, 19 Jul 2004, Gl

RE: [XFree86] no screens found

2004-07-19 Thread Warren Paul
Glen Macdonald <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [XFree86] no screens found Date: Mon, 19 Jul 2004 12:40:14 +1000 I recently installed redhat 9, and when Xfree86 tried to loag i get the errors: Driver can't support depth 24 Screen(s) found, but non

[XFree86] no screens found

2004-07-18 Thread Glen Macdonald
I recently installed redhat 9, and when Xfree86 tried to loag i get the errors: Driver can't support depth 24 Screen(s) found, but none have a useable configuration Fatal Server Error no screens found Any help would be most appreciated, as i really have no idea what i'm doing. Attached is /v

RE: [XFree86] No screens found

2004-05-11 Thread Cynthia Grossen
D] [mailto:[EMAIL PROTECTED] On Behalf Of Karin Marroquin Sent: Friday, May 07, 2004 4:24 PM To: [EMAIL PROTECTED] Subject: [XFree86] No screens found Hi I have some troubles with the XServer, starting of the Xserver is generating this error: (EE) No devices detected. Fatal server error No scr

[XFree86] No screens found

2004-05-07 Thread Karin Marroquin
Hi I have some troubles with the XServer, starting of the Xserver is generating this error: (EE) No devices detected. Fatal server error No screens found ERROR DESCRIPTION So here is a log of the error messages: XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2

Re: [XFree86] no screens found :(

2004-04-28 Thread Michael Taylor
J Mc. wrote: > Ok, last night i booted down Freebsd then booted it back up about a hour > later. ( thought i was leaving, when i was just going out side for a wile). i > cam back and turned the computer on, booted up, loged in, then i type > "startx" i get this error. Check the log file (/var/log/

[XFree86] no screens found :(

2004-04-27 Thread J Mc.
Ok, last night i booted down Freebsd then booted it back up about a hour later. ( thought i was leaving, when i was just going out side for a wile). i cam back and turned the computer on, booted up, loged in, then i type "startx" i get this error.Fatal server error:no screens foundblah blah(stuff t

[XFree86] No Screens Found :( help..

2004-04-27 Thread J Mc.
Ok, last night i booted down Freebsd then booted it back up about a hour later. ( thought i was leaving, when i was just going out side for a wile). i cam back and turned the computer on, booted up, loged in, then i type "startx" i get this error.Fatal server error:no screens foundblah blah(stuff t

[XFree86] no screens found

2004-04-26 Thread Sunil Sharma
I am having Redhat 8.0 with default kernel which come with distro When my system boots up, it will go through its check ok, but when it brings up the login command line, *** RedHAt Linux 8.0 (Psyche) > Kernel 2.4.18-14 on an i686 sunil login: **

Re: [XFree86] No Screens Found, Problem with Setup

2004-03-14 Thread Pieter Hulshoff
On Sunday 14 March 2004 18:22, Patrick Hampton wrote: > Well yes I have a TV attached also. But I was just trying to get the > Monitor working first before I tried the TV. > I thought I told it to use the View Port for the monitor. I'm on thin ice here, as I have no experience with your setup, but

Re: [XFree86] No Screens Found, Problem with Setup

2004-03-14 Thread Patrick Hampton
; Cc: "Patrick Hampton" <[EMAIL PROTECTED]> Sent: Sunday, March 14, 2004 3:49 AM Subject: Re: [XFree86] No Screens Found, Problem with Setup > On Sunday 14 March 2004 01:46, Patrick Hampton wrote: > > I have been having problems setting up my X configuration file. I keep >

Re: [XFree86] No Screens Found, Problem with Setup

2004-03-14 Thread Pieter Hulshoff
On Sunday 14 March 2004 01:46, Patrick Hampton wrote: > I have been having problems setting up my X configuration file. I keep > getting a No Screens Found error. The log file shows that it is using a > default set of horizontal and vertical rates. I have in my configuration a > different set of ra

[XFree86] No Screens Found, Problem with Setup

2004-03-13 Thread Patrick Hampton
I have been having problems setting up my X configuration file. I keep getting a No Screens Found error. The log file shows that it is using a default set of horizontal and vertical rates. I have in my configuration a different set of rates, but XFree keeps using the default set. Anyway to go aroun

[XFree86] No screens found

2004-02-27 Thread Kevin Bullock
I am running Gentoo GNU/Linux, kernel 2.4.22.  I have an ATI All in Wonder Radeon 7500 AGP 64mb video card.  When I startx I receive a "No screens found" error.  Should I post my XF86Config.0.log file?  Thank you.   Kevin

Re: [XFree86] No screens found.

2003-10-15 Thread Risenhoover, Paul
You need to send the XFree86.0.log file (look in /var/log) and your /etc/X11/XF86Config file Balencourt , Michel wrote: >Hi, > > I have a problem with starting my graphic interface on my Linux >station. > > I already tried to install a newer version of Xfree86, and updated >my graph

[XFree86] No screens found.

2003-10-15 Thread Balencourt , Michel
Hi, I have a problem with starting my graphic interface on my Linux station. I already tried to install a newer version of Xfree86, and updated my graphic driver (RadeOn 9100) that I found on the ATI website. Once I did the update, and tried to open with startx, it tries to start

[XFree86] No screens found.

2003-09-17 Thread Filipe - iG
Hi, my name's Filipe and I'm brazilian.   Please sorry, but my english not is good.   I have a problem:   My computer is:   Processor AMD ATHLON 2.0 GHz 512 MB DDR RAM HD 40 GB Mother-board PC-CHIPS M810D (on-board video, sound, lan, modem) Monitor Samsung SyncMaster 550v   I tryed to install

[XFree86] No Screens found

2003-08-14 Thread Kunta Biddinika
Please give me suggestion for this log file: == XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is

Re: [XFree86] No Screens found

2003-08-14 Thread Mark Vojkovich
You can start by using an XFree86 version that isn't 2 years old. XFree86 4.3 is the newest version. Mark. On Tue, 12 Aug 2003, Kunta Biddinika wrote: > Please give me suggestion for this log file: > == >

Re: [XFree86] no screens found

2003-07-22 Thread Jesse Hutton
Try sending your log file of a crash and your config file (and perhaps the output of lspci) so someone can help you out (plain text format, please). Jesse On Tue, 22 Jul 2003, jayjwa wrote: [snip] > > This seems to be about par for the course with XFree86does anyone > know of an alternative?

Re: [XFree86] no screens found

2003-07-22 Thread Jesse Hutton
Hi, Try using Driver "s3virge" in the Device section for your video card. Then remove Device "Accel" from the screen section. Jesse On Tue, 22 Jul 2003, Joel wrote: > I'm trying to set up a clean version of Debian, and for the life of me I > can't figure out why X won't work. > > Attached it th

Re: [XFree86] no screens found

2003-07-22 Thread jayjwa
Joel wrote: I'm trying to set up a clean version of Debian, and for the life of me I can't figure out why X won't work. Attached it the output log of what happens when I try and run startx, as well as my XF86Config. For what it's worth, I've got an s3 virge for video, a SYS 1510P for a monitor (fl

Re: [XFree86] no screens found

2003-07-22 Thread vladimir . nicola
Hi. On Tue, Jul 22, 2003 at 02:56:53PM -0400, Joel wrote: > > Section "Monitor" > Identifier "Sys 1510P" > VendorName "Sys" > ModelName "1510P" > HorizSync 30-60 > VertRefresh 70-90 as I can see your monitor needs a horizontal sync frequenc

[XFree86] no screens found

2003-07-22 Thread Joel
I'm trying to set up a clean version of Debian, and for the life of me I can't figure out why X won't work. Attached it the output log of what happens when I try and run startx, as well as my XF86Config. For what it's worth, I've got an s3 virge for video, a SYS 1510P for a monitor (flatscreen; d

[XFree86] no screens found

2003-06-23 Thread J CB
Hi, when I input startx I get an error saying no screens found. I have a Samsung SyncMaster 750s connected toa Diamond V770 Ultra video card with an nVidia TNT2 Ultra chip and 32MB of video RAM. I am trying to run X in Debian GNU/Linux 3.0r1 with XFree86 4.1.0. I have ran xf86config and xf86cfg

Re: [XFree86] no screens found

2003-06-14 Thread Mark Vojkovich
On Sat, 14 Jun 2003, Jason Cowan wrote: > How do I properly set up the config file to have system find the screen? Usually, but not always, that error means that your video card is too new to be supported by the XFree86 version you have. We need to see your /var/log/XFree86.0.log file to be s

[XFree86] no screens found

2003-06-14 Thread Jason Cowan
How do I properly set up the config file to have system find the screen? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] no screens found error

2003-06-14 Thread Mark Vojkovich
On 14 Jun 2003, Allan Klinbail wrote: > Hi Justin.. > > You'll need to provide more information for anyone to be able to help > you.. > > Send a copy of your /etc/X11/XF86Config-4 file.. The /var/log/XFree86.0.log file is more useful. Mark. > > cheers > > Alla

Re: [XFree86] no screens found error

2003-06-14 Thread Allan Klinbail
Hi Justin.. You'll need to provide more information for anyone to be able to help you.. Send a copy of your /etc/X11/XF86Config-4 file.. cheers Allan On Sat, 2003-06-14 at 21:27, Rajesh.R wrote: > hi, > I am having the following problem after installing > Linux7.3 while trying

[XFree86] no screens found error

2003-06-14 Thread Rajesh.R
hi,     I am having the following problem after installing Linux7.3 while trying to start XWindows by giving the command   "startx" .     Fatal server error   no screens found   please help me          

[XFree86] No Screens found

2003-03-18 Thread LGerritse
I seem to be having trouble creating the configuration on an IBM Netfinity model 831026u with the Intel G video chip. I am using a NEX 1550v flat panel display. The display is not recognized when trying to run the GUI setup routine. When starting x after creating a config I get an error: no screen

[XFree86] No screens found

2003-02-15 Thread Michael Olijnyk
I'm new to Linux and I'm trying to install Red Hat 7.3 on a Compaq Deskpro.Videocard is S3 Trio 64V2 GX. Monitor is Samsung SyncMaster 500b. The probecorrectly identifies the monitor and detects the video card as S3 Trio 64V2(generic). The system is unable to boot into graphical mode. I rece

[XFree86] no screens found error

2003-02-15 Thread Michael Olijnyk
I'm new to Linux and I'm trying to install Red Hat 7.3 on a Compaq Deskpro. Videocard is S3 Trio 64V2 GX. Monitor is Samsung SyncMaster 500b. The probe correctly identifies the monitor and detects the video card as S3 Trio 64V2 (generic). The system is unable to boot into graphical mode. I receive

Re: [XFree86] No Screens Found Error

2003-02-02 Thread Mark Vojkovich
On Sun, 2 Feb 2003, George FernandeZ wrote: > Hi, ive been getting this weird error with XFree86. im pretty sure its because > of the monitor but since im kinda new to linux i dont really know how to fix > it. First, i had Xfree 4.1 or something. then i downloaded the latest one and > upgraded

[XFree86] No Screens Found Error

2003-02-02 Thread George FernandeZ
Hi, ive been getting this weird error with XFree86. im pretty sure its because of the monitor but since im kinda new to linux i dont really know how to fix it. First, i had Xfree 4.1 or something. then i downloaded the latest one and upgraded to 4.2.99.3. (I had the errors the first time too). I

[XFree86] no screens found

2003-01-26 Thread ITconsultant
Hi install FreeBSD 5 Please help me with this Error Ali     Fatal server error:no screens foundWhen reporting a problem related to a server crash, please sendthe full server output, not just the last messages.This can be found in the log file "/var/log/XFree86.0.log".

Re: [XFree86] No Screens Found Problem

2003-01-21 Thread Harald Nordgård-Hansen
Carrie Lee <[EMAIL PROTECTED]> writes: >I cannot get X to run on my Redhat 8.0 installation. I am using a >Dell Inspiron 8000 with a ATI Mobility M4 card. I've upgraded to the >latest version of xfree86 and run the configuration tool several >times. I've pasted the log file below

[XFree86] No Screens Found Problem

2003-01-21 Thread Carrie Lee
Hi, I cannot get X to run on my Redhat 8.0 installation.  I am using a Dell Inspiron 8000 with a ATI Mobility M4 card.  I've upgraded to the latest version of xfree86 and run the configuration tool several times.  I've pasted the log file below. Any help would be greatly appreciated. Thanks. Carrie