is it posible to run kde thro ssh conection it's giving me an error how to
make that cookie?
Thanks
UAB"Blastema"
System Admin
Karolis Vigelis
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do not have console ownership?
When reporting a problem rela
On January 11, 2003 05:50 pm, you wrote:
Hi,
I have very strange problem. I am using xfree86 4.2.1 on i386 (kernel
2.4.20, glibc 2.2.5, Slackware 8.1) machine. From time to time my left
margin on screen (about 1,5 cm wide) becomes inaccessible for mouse
pointer. Everything on screen is fine (i
Hi
I need help and advise. I have just installed Linux Redhat 8.0. It will not
boot into the
GUI interface and comes up with this error. The error ask to contact this
website for
help. Here is word for word the error report.
Thanks
Craig
Reporting problems ( See www.xfree86.org/ )
Hi
I need help and advise. I have just installed Linux Redhat 8.0. It will not
boot into the
GUI interface and comes up with this error. The error ask to contact this
website for
help. Here is word for word the error report.
Thanks
Craig
Reporting problems ( See www.xfree8
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
I can't run my X.What can I do?
I'm install the X,and when I run xf86cfg, i'm get a message:
Fatal server error:
xfEnableIO: Failed to open /dev/io for extended I/O
Please HELP ME!!!
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/li
I am trying to run multipule X screens i can't figure it out. It fails
or only starts on one monitor. I have tried $startx -- +xineama, but
it fail i don't know what else todo. i can force in to load by $startx
-- -screen screen#.so any help would be great zippo. i have attached a
copy of my XF86
whenever i m starting my x server thru startx getting following
message in log file:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window
System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if yo
No vga detected no monitor too.I have an ati
9500 vga and the monitor is an eizo L355 flexscan.What do i do??
Thanks,
XFREE86_.{_C
Description: Binary data
Sir,
I could not open my x windows.There is problem
while shutting dowm.I getting the message as SHUTTING
DOWN XFS FAILED.Please help me
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
XFree86.0
hi,
I am attaching the error log with this message.
Please help me to fix the problem
regards,
Sujith
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6
Witaj xfree86!
I can't start X windows on my comp.
What is tool to configure Xwindows in redHat 8 ?
Thanks for answer,
--
Pozdrowienia,
rafal_zalewski mailto:[EMAIL PROTECTED]
XFree86.0.log.gz
Description: GNU Zip compressed data
XFree86.0.log.bz2
Description
i have 1024x768 100hz
Monitor Samsung 757nf
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version
I hope you can help with this problem. I have not been able to start X
for some time. I don't BELIEVE that I did anything to change the way it
was running when it stopped but hopefully you can give me some hints as to
what I need to do.
Attached is the error log from when I tried to start X the
I'm using a VMWare (this is a virtual maschine). Could you help me with
that. I have pentium 4, 1.8 GHz, VideoCard nVIDIA GFORCE 2 MX, 128MB RAM,
Monitor Sony E250. The attachment is my XFree86 log file.
Thank you
Mr. Plamen Dimitrov
XFree86 Version 4.1.0 / X Window System
hi,
I'm using debian and I can't get x-windows to run. I don't even know
if youre the one to ask, but I get a message that says there was an explicit
server kill. If you can help me, I can send you the full error
message.
Thanks.
Andrew Bale
Can’t boot X L
Sincerely,
Dmitri Lissine
XFree86.0.log
Description: Binary data
I need of help, my server no start, those are my configuration files,
I thank the attention
MESSAGE ERROR
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002 Buil Operation System: Linux
2.4.18-23md
The Linux 7.3 I installed
cannot detect my monitor, I have Philips 15" 105E12 monitor. Here's
what happened, when the installation was just two clicks away, the installer
told me to indicate the monitor model which is not available among the
selection. So I just chosen Generic settings.
hello,when i reboot my redhat server,i cann't enter
X-windows.
>startx
fatal server error
Could not create lock file in /tmp/.txo-lock When
reporting a problem related to server crash, please send a full server
output, not just the last message.
#
thanks
wuha
hi
Linux 7.0 is now running on our machines.
The Video Card name is Intel 845(IBM 9215),
But we can't start Xwindows although we use XF86Config .
why? and how?
thanks!
=
ÕæÕýVIPÏíÊÜ£¬ÏëÔõô»¨£¬¾ÍÔõô»¨£¡ http://
xfree86,
It's the first time that I ask you question. Because I have trouble in using X
Windows.
Today,I have finished the installation of Red Hat Linux 8.0,but I cann't start
the X Windows,the error displayed in the screen is "Screens found,but none have a
usable configuration"
Dear Sir/Madame,
I recently installed a inux 7.3 for Intel on a IBM 5100 machine. When
running startx I get the following error:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
Hi,
My name is Paul Richard. I have installed RedHat Linux 7.3 on a HP NetServer Plus. It
has a Trident TVGA 9000 chipset which is found in the drivers list, but when I try to
start X it says "no screens found". Any advice would be greatly appreciated.
Sincerely,
Paul V. Richard
TWNEOR Region I
Respected Sir/Madam,
I'm trying to configure the xterm on the redhat
Advanced server 2.1 so that I could apply patches and
install remotely using x.
Somehow nothing seems to work for me as I'm new linux
space.
I would appreicate any feeback from you.
Below is the error that I receive when I typ
Hi,
could you please help me with the XServer crash.
For some reason after I have correctly restart PC my XServer couldn't
start.
See the attached log file for more
details.
Thanks for your help
XFree86.0.log
Description: Binary data
I'm trying to build an intra Net with LTSP in a school (La Paz -
Bolivia)
1 Server PIII 1.2 GH, Linux Mandrake 8.1, RAM 512 MB, HD 40 GB.
18 LessDisk terminals (BootDisk) 486, PI and PII
NET Topology = BUS Coaxial
I'm almost ready with this NET. but when a terminal is trying to get into XFree
Hello XFree86 Team
I have a problem setting up my monitor. I have a laptop Acer 350C. I've attached the XFree86.0.log file. The file describes something related with "can't open the module v41"
thanks for the advice that you can let me,
Boris
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 p
This is the log from /var/log received when i try to
start X server.I use the FreeBSD operaiting system on
the machine which have a integreted video card(Intel
810).The version of XFree86 is 4.2 if am not rong!
What can i do?
Regards,
Daniel Oancea
__
Do you Yaho
This is the log from /var/log received when i try to
start X server.I use the FreeBSD operating system on
the machine which have a integreted video card(Intel
810).The version of XFree86 is 4.2 if am not rong!
What can i do?
Regards,
Daniel Oancea
__
Do you Yah
Hey, i am useing Icewm and i am trying to specify the font in a config file. Font
Speedo. i use the line TitleFontName=/usr/X11R6/lib/X11/fonts/Speedo/
that doesn't work i was wondering if you knew of the proper command or call i should
use? thanks for anyhelp zippo
_
plz send more information about
xfree86
intel 845gvb audio&vedio drivers
thanking u
yours truely
jafar
[EMAIL PROTECTED]
I had trouble to install my video
Could you help me?
I am sending the log file
Thank you.
Breno Coelho
XFree86.0.log
Description: Binary data
Hi,
Please see my attached log file...gets as far as the nvidia logo and then flashes that
continually. Any help with this would be fantastic. If you need any more info please
let me know.
<>
Best Regards
Greg Westland
XFree86.0.log
Description: XFree86.0.log
Somebody could help me about this log?
---
Acabe com aquelas janelinhas que pulam na sua tela.
AntiPop-up UOL - É grátis!
http://antipopup.uol.com.br
log
Description: Binary data
opa... blza?
tenho um mouse serial e nao consigo configura-lo no
slackware 9.. podem me ajudar??
Obrigado t++
Eduardo Batista
__
Acabe com aquelas janelinhas que pulam na sua tela.
AntiPop-up UOL - É grátis!
http://antipopu
I have error in load REDHAT 7.2
Help me,please!
--
С уважением,
Pgennady mailto:[EMAIL PROTECTED]
XFree86.0.log
Description: Binary data
Hello, I’m somewhat new to using FreeBSD. I just installed XFree86 …. I just want
a desktop to popup on my screen when I type startx
…so far when I type startx, I
get
--
XFree86
Version 4.3.0
Release
Date: 27
February 2003
X
Protocol Version 11, Revision 0, Release 6.6
B
Good
day friends.
I
am Brazilian, my English is bad.
I
am using a translator.
I
am with a doubt.
When
installing XFree86 4,3 the Kde presented the message: Couldn't start Ksmserver.
Check Your Installation.
Linux Distribution: Conectiva 8
What
it had?
Thanks
Hi People!
I'm new to Mandrake Linux but no to Unix world, so I
now a little bit about the OS...
Can you help me with this message errors? The "X
Server" dies with "Signal 11" while I'm working and I
loose everething, this happends too much and I can't
work, also I get some "core dump" messages
s
I need help!
I have Pentiun Celeron, CardVideo Intel810, and no get open startx!
Thanks!
João Alexandre
--
Use o melhor sistema de busca da Internet
Radar UOL - http://www.radaruol.com.br
XFree86 Version 4.1.0 / X Window System
(protocol Version 11
I can't do startx for go on XWindow, I send u my
log file..
HELP ME!!!
i'm italian, please speak an easy
english
THANK
Hello!
may u will smile but i really want to get help from u.
I instelled the Darwin 6.62 on computer.
i starts the startx and all i see is a 3 terminals
how to start the KDE or something on my computer?
How to get normal useable GUI?
--
Best regards,
Kalich mailt
> This is related to xfree86 as i am told. i have
an AMD Athlon XP2500 > system with an Nvidia GeForce FX5200 video
card. when i am trying to > install Redhat 9 on this sytem,
Anaconda detects my video card and > assigns the Generic VESA
driver--this is where things go wrong. The > instal
Hello,
I´ im writing you from Barcelona, Spain.
I have some trouble installing "X" in my linux
system (Mandrake 9.1), based on a Pentium IV, with an ATI Radeon 7000 Card and a
LG Studioworks 700S monitor.
I have 512 Mb of memory, with a 80 GB hard disc,
who is half-used by Windows XP and
I`m trying to install redhat 9 on a Compaq presario 900us, but the x windows
doesnt work...what can Ido?
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
XFree86 Version 4.2.1.1
Debian debian-30r1-i386-binary-1_NONUS
Geforce 4 MX 440 64mb
I have reconfigured my xfree86 many times, using
vesa, nv and vga. But every time I get the same error.. no screens found. I have
the latest kernel installed.
XFree86.0.log
Description: Binar
I don't know what's up please help me, i'm runnig debian sid with kernel
2.4.23, my video card is ATI Rage 128 pro ultra... 16M
Thanks
XFree86.0.log
Description: Binary data
I heave install RED HAT 9, end after 5 day the X-server was crash (the
computer was shat down, maybe after start), however I download the newest
version of Xfree86, I install in Steel dont work.
Im novice in linux, and I relay need help to repair the X-server.
Please Help me
Many tanks
Emi
尊敬的组织:
你们好!
首先祝你们每一人都圣诞快乐!
我是一名中国的大学生,对LINUX系统比较感兴趣,但是没有条件上网,好不容易找到一张TRED HAT 7。2的安装盘。可是问
题就出在这里,我的显卡是GEFORCE4 mx440,所以我不能进入kde 或是gone对于一个自学的人等于在黑暗中走路,我身边又没有人
教我,我们学校没有老师懂啊!我不想我的这个想法被扼杀,没有条件我就去创造!
我在圣诞节前给你们送去一份快乐和我的心愿!
你们如果懂中文有多么的好啊!
好了!祝那么快乐!幸福!
如果那么可以看懂的话,请给我回一份邮件[EMA
hi,
I installed slckware 9.1,from my h/d,i downoloaded
it from a mirror site,now i want to "startx"there are some error messages,when i
am tryieng to cofigure with"./xf86Config"there is an error message"xf86Config
not found"althought the same error message is with"./XF86setup",then i
tried w
Hi,
How can we create a dual bootable system with Win
XP and red hat linux 7.1, can anyone pls help me in this. Thanx in
anticipation.
Ashutosh
Hi!
I am unable to start Xwindows. As the error directed, I have attached XFree86.0.log with this.
I can't understand why I am getting this. Please provide a solution to this problem. I am keenly waiting for your valuable reply.
With Regards,
M.Chidambaram
Yahoo! India Mobile: Ringto
Config Error: /etc/x11/xfree86 config:243
_
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%
Please help!I just installed winlinux2003!During
boot it hangs at "setting up winlinux partitions"!
www.winlinux.net is down so i can't get any
support.i tried to config linux2003 using xf86config.Then i saved the config
file and typed startx,but it stops.here is the log.Thanks!
XFree86 Vers
I'm trying to start an x by using "ssh -X [IP]" and i get an error of
"cannot open shared library libXext.so.6"
I checked and found the file in the /usr/X11R6/lib folder.
What am I doing wrong?
___
Law Enforcement Software For The 21st Century!
Brian Germann
Wayne Enterprises
Stockton, CA, U
! $Xorg: XErrorDB,v 1.3 2000/08/17 19:44:59 cpqbld Exp $
! Copyright 1993, 1995, 1998 The Open Group
! All Rights Reserved.
!
! The above copyright notice and this permission notice shall be
! included in all copies or substantial portions of the Software.
!
! THE SOFTWARE IS PROVIDED "AS IS",
i have a registered redhat linux 8.0. and my linux gui will not work on
bootup.
below is the full error log.
please tell me what to do.
thanks.
From: root <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Tue, 16 Mar 2004 21:48:07 -0700
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) /
Can you assist?
I have a new computer with AMD Mother Board. From the box I see it has a KM266 chipset. Going to www.via.com.tw I find that this is an S3 Graphics ProSavage8
Can you help?
Hiram Trisler
Senior DataBase Administrator
110 W. Mitchell
Martinsville, In. 46151
Get rid of annoying p
please i need help whit this error !!
_
MSN Amor: busca tu ½ naranja http://latam.msn.com/amor/
XFree86.0.log
Description: Binary data
Title: Mensaje
I have a problem
whith a Intel 82845G/GL. the file has the error.
I have a PC Dell
whith a hard disk 20 GB, 512MB memoryLinux RedHat 9
Can you please help
me...
thank,
Raúl Matheus
González
Adm. de Telecomunicaciones
Computec S.A
Tel. 6405868 Btá
[EMAIL PROTECTED
Title: Sõnum
My problem with linux is - i connect videocard
to tv linux stop working. but normali linux work
fine
XFree86.0.log.old
Description: XFree86.0.log.old
hello,
I need the xfree86 V4.4 runing on a Readonly filesystem.
How can I do ?
Thank you !
yours ZWJ
2004-06-08
[EMAIL PROTECTED]
__
×¢²áÐÂÀË9Õ×Ãâ·ÑÓÊÏ䣨 http://mail.sina.com.cn/chooseMode.html £©
I'm beside myself, Going nuts. Can you give me a clue. I'm in Mac OS X
10.2.6 Jaguar, Also using fink for my source. I down loaded xfree86 both
base & rootless and rebuilt them and tried to follow instructions from
fink and also on discussion @ Apple unix group.
Well here it is.
startx
This is
Hi,
Red Hat 9 on a Dell Latitude C600.
I have re-loaded Linux several times in graphics and CLI mode.
I stay with the defaults where possible.
In graphics mode the display looks great during the load phase.
Subsequently it is not possible to get graphics mode after booting.
Everything else seems
Hi, please i need your help, enclosed can see the log file for XFree86.
I have a problem to the graphic gnome, the thing is that when i restart the
server , only see the character prompt (before the graphic gnome coming up
very weell). I try to startx and xinit , but the only i can see is the
mess
Hello I dont know how this bug thing work. I am
sendind you the file
XFree86.20.log
My system is crashing continuosly in KDE and GNOME. I
would like to know how to repair it, and where to
track the bug infromation. Thanks a lot
Carlos
Help me
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
XFree86.0.log
Description: XFree86.0.log
I recived this and I don`t know what to do. I install the winex and mandrae 10 crash.
it the 2 time. i have this problem before but I reinstall the opereited sistem , I
loose my data :(
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PRO
hi!,
i have installed Redhat Linux( 2.4.xx) on my i386 pc.i am not able to start
the gui.
when i give this command
#startx
i get the following output which i am writing a part of it.
..
Markers:...
(EE)Unable to locate/open config file
(EE)Error from xf86HandleConfigFile()
Fatal server error
any body can help my geting SiS650X graphincs driver
for RedHat7.3
__
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail
___
XFree86 mailing list
[EMAI
any body can help my geting SiS650X graphincs driver
for RedHat7.3
__
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
___
XFree86 mailing list
Title: Help.
Im running an Intel P350, 256mb ram, 40gig hd.
New installation of RH linux FC3
Installed XFree86 v4.3.0 using Xinstall.sh script
After the install I ran XFree86 -xf86config /root/XF86Config.new to test the server and it comes back with the following errors:
(EE) xf860Open
linux: FC3
kernel: 2.6.10
XFree86:4.4.0
graphics card: ATI 9100
Please help me ~
Thank you very much!
--
侬好上海热门专题大盘点
http://sh.online.sh.cn/special/2004huati/
网络相册:快乐让世界分享
http://album.online.sh.cn
给你最爱的人一点诱惑,一点惊喜,还有。。
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
Greetings
I have a problem with my red hat Linux7.1 .
Every time the electricity switched off and my
computer shutdown ,then when i open the computer again
and try to boot Red Hat Linux i can't and get the
message tell me to enter root password to make
maintenace and after i do, i enter in the (Sy
I have a problem with my X, help me!Here is log (file attached)
Yahoo! Mail goes everywhere you do. Get it on your phone.
XFree86.0.log
Description: 1128613986-XFree86.0.log
I've a problem when i install VMWare tools for Linux 2.4 kernel, i don't know how to resolve it! Your instruction 'll be a great help to me!
Thank you very much!-- Hoàng Yến
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release
hello,
we are trying to make a project which is as under:
Booting and Running linux from USB pendrive.
we have succeeded in booting linux version 2.6.22.9
from our pendrive, and installed busybox utility which
are running fine.But now we need to install Xwindows
environment but we have no idea how
On Thu, 14 Nov 2002, Karolis Vigelis wrote:
> is it posible to run kde thro ssh conection it's giving me an error how to
> make that cookie?
It is possible, but the correct command is startkde.
best
Vladimir Dergachev
PS The reason why command did not wor
Hi, I have a some problem
Error massage below ...(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
Not loading .rodata.str1.32
Not loading .rodata.str1.1
Not loading .rodata.cst8
Not loading .rodata.str1.1
Not loading .rodata.str1.32
Not loading .rodata.str1.32
Not loa
On Sat, 18 Jan 2003, Craig wrote:
> Hi
> I need help and advise. I have just installed Linux Redhat 8.0. It will not
> boot into the
> GUI interface and comes up with this error. The error ask to contact this
> website for
> help. Here is word for word the error report.
No, it is incomp
Craig wrote:
Hi
I need help and advise. I have just installed Linux Redhat 8.0. It will not
boot into the
GUI interface and comes up with this error. The error ask to contact this
website for
help. Here is word for word the error report.
Possible you didn't configure your X.
Try configur
Your OWN email contains a copy and paste of the following:
> When reporting a problem to a server crash, please send the full server
> output, not
> just the last message. This can be found in the log file
> "/var/log/xfree.0.log".
But I don't see the attached said file.
JohnFlux
On Friday 17
Tapsell
Sent: 19 January, 2003 4:09 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Help
Your OWN email contains a copy and paste of the following:
> When reporting a problem to a server crash, please send the full server
> output, not
> just the last message. This can be found in the
Craig wrote:
Hi John
Tried to get the log file, to be able to attach but it says the file does
not exist. Someone said to try using xf86config which i tried but still no
luck any ideas.
Try configuring with xf86cfg -textmode. Visit ALL seven menus. Don't
forget to save resulting config.
Hello Guys
I am just starting out on this Linux journey and are having problems getting
the X Server started. I have run the xf86config a number of times, but with
no success.
The machine I am trying to run Red Hat V8 on is a Pentium MMX machine. It is
a HP Vectra VE with a Dell E551 Monitor, and
Hello,
You are more likely to get help if you also include a description of
what's wrong. And what distro and version of Linux and Xfree you are using
just for clarity's sake. Maybe what kind of hardware too. :) (For example,
your video card could be considered germane.)
Everything was lo
Bruce,
We seem to be getting more and more errors with no information in them.
How are we supposed to help you if you don't give us any information?
For a start, what OS is this? What cpu? What distribution?
What do the logs say? What are the permissions on /dev/io?
What version of X
I did not realize that we had a few virtual people on this list!! ;^)
Lionel
--- John Tapsell <[EMAIL PROTECTED]> wrote:
> We aren't physic.
>
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_
Try:
redhat-config-xfree86
On Wed, Jan 29, 2003 at 06:18:50PM -, vikash gautam wrote:
> whenever i m starting my x server thru startx getting following
> message in log file:
>
>
>
> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window
> System
> (protocol Version 1
On Sat, 25 Jan 2003, kate lee wrote:
> Could not init font path element unix/:7100, removing from list!
>
> Fatal server error:
> could not open default font 'fixed'
>
Your XF86Config file specifies that a font server should be
used, yet one isn't running. Run xfs.
On Sat, 15 Feb 2003, rafal_zalewski wrote:
> Witaj xfree86!
>
> I can't start X windows on my comp.
> What is tool to configure Xwindows in redHat 8 ?
> Thanks for answer,
>
I don't know about RH8, but looking at the log file...
Your monitor specs are entered incorrectly in your X
On Sun, 16 Feb 2003, Alexandr N. Fedorov wrote:
> i have 1024x768 100hz
> Monitor Samsung 757nf
>
Uninstall NVIDIA's binary drivers and change driver "nvidia"
to "nv" in the XF86Config file.
You were trying to use NVIDIA's binary drivers yet you did
not observe the "(sec-01) SOFTWARE REQUI
Your XF86Config file says to use a font server, yet one doesn't
appear to be running. Run xfs or put a font path in the Section "Files"
of the XF86Config. eg.
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11
>I'm using a VMWare (this is a virtual maschine). Could you help me with
>that. I have pentium 4, 1.8 GHz, VideoCard nVIDIA GFORCE 2 MX, 128MB RAM,
>Monitor Sony E250. The attachment is my XFree86 log file.
If You run Linux inside vmware under unknow OS, then use "vmware" video
driver for xf86.
I
1) try knoppix (www.knoppix.de) to exclude hardware problems
2) send the log from your X session
ANDREW BALE wrote:
hi,
I'm using debian and I can't get x-windows to run. I don't even know if
you’re the one to ask, but I get a message that says there was an
explicit server kill. If you can help
Hello.xfree86!
My card is ATI card. but my XFree86 didn't work !Hope you can help me.
Best regards!
gwd
XFree86.0.log
Description: Binary data
Hello
I need to make a investigation about grafics servers of Linux. I need to
know more servers like xfree86 use in Unix.
Thanks in advaced
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hello
I need to make a investigation about grafics servers of Linux. I need
to know more servers like xfree86 use in Unix.
Thanks in advaced
1 - 100 of 490 matches
Mail list logo