x27;
Subject: Re: [xmail] User password
Hi Fred,
Thanks for your help, unfortunately port 6017 is closed I only have access
using the shell prompt and don't know the Xmail admin password but I do have
full root shell access.
Regards
Barry
-Original Message-
From: xmail-boun...
I use this to control my server:
http://www.webifi.com/xmail/
It talks to XMail through TCP PORT 6017 which is where XMail listen for its
control protocol.
You could also telnet localhost 6017
Then type "root"[ TAB]"yourpassword"[enter]
Then type "userpasswd"[TAB]"domain"[TAB]"username"[TAB]"pa
Some spammer is forging his sender address resulting one of my account
receiving tons of bounces from remote servers.
I have added an SPF record to the affected domain name, is there anything
else I can do?
Thanks for help.
___
xmail mailin
account.
I have deleted the emails and now everything seems to work fine.
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Fred
Sent: 12 avril 2012 08:58
To: 'XMail Users Mailing List'
Subject: Re: [xmail] 100% CPU us
phpscript.
Nobody can help you.
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Fred
Sent: Thursday, April 12, 2012 2:26 AM
To: 'XMail Users Mailing List'
Subject: Re: [xmail] 100% CPU usage
bump
-Original Mess
bump
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Fred
Sent: 10 avril 2012 10:38
To: 'XMail Users Mailing List'
Subject: [xmail] 100% CPU usage
Hello, I would like to know what I can do about that problem?
My XMail
Hello, I would like to know what I can do about that problem?
My XMail server is hitting 100% CPU usage (and stops receiving mails, pop3,
etc) when a PHP script (phpmailer) is using it as a SMTP server to send
mails. This is not mass mailing but only many people registering on a
website at the sam
Hello, is it possible to bypass all filters for a specific domain?
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
org]
On Behalf Of Ivo Smits
Sent: 18 novembre 2011 11:07
To: xmail@xmailserver.org
Subject: Re: [xmail] Email all local accounts?
Hi,
I don't think this is directly supported. You can generate a list of e-mail
addresses from the mailusers file, for example using this command on linux:
cat mai
Hey guys,
Quick question; is there a way to broadcast an email to all XMail accounts
on a single server?
I need to inform everyone, about 800 accounts, that I will do hardware
maintenance this week-end.
Thanks
___
xmail mailing list
x
er the new password)...
-Message d'origine-
De : xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]De
la part de Fred
Envoyé : mercredi 6 juillet 2011 19:36
À : xmail@xmailserver.org
Objet : [xmail] Getting hammered bad
Hello all,
I need help to fight agains
Hello all,
I need help to fight against spammers, here is a sample of an smtp log
entry:
"mail" "mail" "72.16.236.115" "2011-07-06 12:46:21"
"ALEXSERVER01.ANDREWALEX.local" "hotmail.co.uk"
"vreaus...@vreausutelog.com""obbard_d...@hotmail.co.uk" "SE86331"
"RECV=OK" "legitusern
I would also like being to disable pop3 locking. Let's wait for Davide's
response.
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Sabahattin Gucukoglu
Sent: 18 mars 2010 09:03
To: XMail Users Mailing List
Subje
2005, I know I know... hehe
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 26 février 2010 17:17
To: XMail Users Mailing List
Subject: Re: [xmail] XMail 1.27 released
On Fri, 26 Feb 2010, fred wrote
Mail Users Mailing List
Subject: Re: [xmail] XMail 1.27 released
On Fri, 26 Feb 2010, fred wrote:
> Hello Davide,
>
> Thanks for this new release.
>
> I have issues building this on FreeBSD-4.11 32bits, here is what happens:
>
> g++ -D_FILE_OFFSET_BITS=64 -I. -D__UNIX__ -
intf("Further characters after number: %s\n", endptr);
exit(EXIT_SUCCESS);
}
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 26 février 2010 11:10
To: XMail Users Mailing List
Subject: Re: [xmail] XMai
Hello Davide,
Thanks for this new release.
I have issues building this on FreeBSD-4.11 32bits, here is what happens:
g++ -D_FILE_OFFSET_BITS=64 -I. -D__UNIX__ -D__BSD__ -D__FREEBSD__
-D_REENTRANT=1 -D_THREAD_SAFE=1 -DHAS_SYSMACHINE -D_GNU_SOURCE
-D_LARGEFILE64_SOURCE -D_POSIX_PTHREAD_SEMANTICS
Davided,
Do you have an idea of when 1.27 is going to be released? I am asking
because since pre1 there are lots of fixes and I am thinking of updating my
servers soon, I will wait if you are planning to release it soon.
Thanks
-fred
- Original Message -
From: "Davide Libenzi
You should at least specify the name of the DLL ;)
I guess this is OpenSSL, you should install the latest version.
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Edinilson - ATINET
Sent: 19 janvier 2010 14:00
To: XMail Users Mai
Oops
. LIMA LIMA for the last one. Sorry.
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of fred
Sent: 11 janvier 2010 13:14
To: 'XMail Users Mailing List'
Subject: Re: [xmail] XMail switches - questions . . .
Hello,
Q1) PAPA LIMA, SIERRA
Hello,
Q1) PAPA LIMA, SIERRA LIMA, LIMA INDIA
Q2) By defaut all logs are automatically created and their names cannot be
customized unless you modify the source code. Path is MailRoot/logs
I hope this helps
-fred
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org
[mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 14 octobre 2009 13:20
To: XMail Users Mailing List
Subject: Re: [xmail] Multiple from inside mail headers
On Wed, 14 Oct 2009, fred wrote:
> I understand Davide, I knew this wasn't XMail fault, I only wanted to find
a
>
y are different do something.
What do you guys think?
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 14 octobre 2009 13:01
To: XMail Users Mailing List
Subject: Re: [xmail] Multiple from inside mail headers
O
ut, $return);
$this->_from == @@FROM
Spfquery return a digit as the return code which is what I use for either
dropping the email or let it go throught.
Thanks
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of CLEMEN
to analyze the faked from?
Thanks
-fred
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
Thanks,
Changed the single quotes to doubles and it works fine with \@
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 24 août 2009 13:59
To: XMail Users Mailing List
Subject: Re: [xmail] Problem using
.com" "" ""
"SNDR=ESYNTAX" "" "0" ""
I understand that @ must be escaped, but how do we tell Perl to send the
string without the \ ?
This might be a real noob problem, I dont know anything about perl.
Thanks for help,
-fred
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
binaries into MailRoot/bin/ of your old
installation
8. Go to the website and read the changelog since 1.23 for adding the
new variables inside server.tab
There might be other minor things to adjust but that covers the major steps.
-fred
From: xmail-boun...@xmailserver.org [mailto:xmail
I like writing filters for XMail, when I get a chance I will write one for
you.
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 21 juillet 2009 08:57
To: XMail Users Mailing List
Subject: Re: [xmail] limit #o
Wed, 1 Jul 2009, fred wrote:
>
> >
> > There is a build error when building XMail-1.26 on FreeBSD-7.x
> > servers, I didn?t try it on 6.x but I guess they also have this problem.
> >
> >
> >
> > #gmake -f Makefile.bsd
> >
> > g++
There is a build error when building XMail-1.26 on FreeBSD-7.x servers, I
didnt try it on 6.x but I guess they also have this problem.
#gmake -f Makefile.bsd
g++ -I. -D__UNIX__ -D__BSD__ -D__FREEBSD__ -D_REENTRANT=1 -D_THREAD_SAFE=1
-DHAS_SYSMACHINE -D_GNU_SOURCE -D_LARGEFILE64_SOURCE
-D_PO
"!wlex" "/mailsrv/MailRoot/filters/antispam/antispam.php" "@@FROM"
"@@CRCPT" "@@RRCPT" "@@REMOTEADDR" "@@FILE"
I think this would do the trick!
Thanks!
-fred
-Original Message-
From: xmail-boun.
Thanks Davide,
If I understand correctly I can't completely whitelist a certain smtp IP
range from all the filters/checks, I will have to create a whitelist within
my filters? This is not a problem, I just want to make sure.
-fred
-Original Message-
From: xmail-boun...@xmailserve
Hi guys,
Is it normal that even if I put a range of IPs inside smtp.ipprop.tab that
emails that I receive from theses IPs get caught by filters? I have triple
checked all the .tab files and they are all in correct format (tabs and
enter for last line).
Here is the content smtp.ipprop.tab file:
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 31 mars 2009 11:58
To: XMail Users Mailing List
Subject: Re: [xmail] POP3 locks
On Tue, 31 Mar 2009, fred wrote:
> For the second time in about a month
I do to prevent this from happening again?
Thanks a lot for your advices,
-fred
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
email from paypal.us to blackberry.net for
one of my user and it has been rejected. My question is more, should I do
the same on my server ?
What do you think?
Thanks!
-fred
___
xmail mailing list
xmail@xmailserver.org
http
It might help you but this is the script that I have made / use:
http://xmailforum.homelinux.net/index.php?showtopic=4260
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Ralf
Sent: 28 janvier 2009 20:43
To: XMail Users Mailing L
r the help! :)
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of fred
Sent: 15 décembre 2008 17:17
To: 'XMail Users Mailing List'
Subject: Re: [xmail] Multiple server on same system
Because I am using XMail with a
nding them immediately.
I will only be bottlenecked by cpu time and by the banwidth.
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Shawn Anderson
Sent: 15 décembre 2008 16:55
To: XMail Users Mailing List
Subject: Re: [xmail] Multi
Thank you Davide, as usual your reply is gold!
-fred
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org]
On Behalf Of Davide Libenzi
Sent: 15 décembre 2008 15:20
To: XMail Users Mailing List
Subject: Re: [xmail] Multiple server on same system
On
iscovering something that prevents me from doing that.
Any advices?
Thank you
-fred
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
Yes, that's what I think too and that's what I told that guy.
I have disabled all my filters and asked the guy to re-send his email; same
problem.
I am running out of ideas.
Any help / suggestions is appreciated.
-fred
-Original Message-
From: [EMAIL PROTECTED] [mai
hair*
I hate MS so bad.
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Davide Libenzi
Sent: 21 novembre 2008 14:42
To: XMail Users Mailing List
Subject: Re: [xmail] winmail.dat pain
On Fri, 21 Nov 2008, fred wrote:
> Hi all,
>
> I have
--debug produce a lot of output
If FILE is not specified standard input is used
Report bugs to <[EMAIL PROTECTED]>
mail#
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of fred
Sent: 21 novembre 2008 13:44
To: 'XMail Users Mailing
.
Thanks a lot
-fred
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
This is done on the DNS side.
It must be configured so the external IP of your XMAIL server will resolve
to something.
Ex:
XMAIL ip = 1.2.3.4
# nslookup 1.2.3.4
Server: yourdns.net
Address:yourdns.net#53
Non-authoritative answer:
4.3.2.1.in-addr.arpa name = yourxmailserv
d like a confirmation from an expert first.
By the way, I am not spamming, this is a newsletter were the users register
by themselves.
Thank you
-fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
Thanks for the reply Davide. Yes I know mailproc.tab supports filters, but
the problem is activating and managing the mailprocs if you have numerous
users, I will just automate this task by making another script.
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
lution but the only one for the moment.
Thank you
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of CLEMENT Francis
Sent: 25 septembre 2008 11:37
To: 'xmail@xmailserver.org'
Subject: [xmail] Re: Filter attachments before mailproc.t
filters.in.tab and do a
check like:
If(file_exists(/var/MailRoot/domains/mydomain.com/user/mailproc.tab))
{
//Script here
}
What does the gurus think?
Thanks in advance
-fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a
English is not my born language I do my best. Sorry for the bad explaination
of my issue.
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Davide Libenzi
Sent: 30 mai 2008 14:21
To: XMail mailing list
Subject: [xmail] Re: XMail SMTP outgoing port
Bill,
I can't believe I didn't see the -SI switch... I thought only -Sp was able
to change SMTP port.
THIS JUST SOLVED ALL MY PROBLEMS! :)
Thanks!
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Bill Healy
Sent: 30 mai 2008 13:22
link
installed ([EMAIL PROTECTED])
The only way I could send mails with my domain would be to set up SMTP auth
in my mail client with the username/password I have for [EMAIL PROTECTED]
account,
but they told me this won't work for a long time.
Like Davide said, I am pretty much screwe
hanks
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] =
On
Behalf Of Davide Libenzi
Sent: 29 mai 2008 13:25
To: xmail@xmailserver.org
Subject: [xmail] Re: XMail SMTP outgoing port?
On Thu, 29 May 2008, fred wrote:
> Hi all,=20
>=20
> Is it possible to conf
connections so I will have problems
receiving mails.
Is there any solution to this problem?
Thanks in advance
-fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help&qu
l get back to you if I manage to
get a debug XMail.core.
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Davide Libenzi
Sent: 20 mai 2008 15:21
To: xmail@xmailserver.org
Subject: [xmail] Re: 1.25 just started to seg fault
On Tue, 20 May 2008, fred
uot; ? When I installed
it 3 months ago I have got the source from:
http://www.xmailserver.org/xmail-1.25.tar.gz
Bill, I will try to run memtest86 ASAP but I have to move the domains and
users to another server before doing that. This is a production server and I
cannot take it down for
XMail), uid 0: exited on signal =
11
(core dumped)
Signal 11 is most likely an hardware problem but why does 1.24 runs =
fine?=20
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] =
On
Behalf Of fred
Sent: 20 mai 2008 09:25
To: xmail@xmailserver.org
Subject: [xmail]
you.
-fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
.
Thank you
-fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
" "128.107.241.180"
"2008-04-29 16:00:18" "smtp-ext-sj-2.cisco.com" "mydomain.net"
"[EMAIL PROTECTED]""[EMAIL PROTECTED]" "S441694" "RECV=OK"
"" "1269"
ot;
If I disable all the filters in filters.post-data.tab I can now receive
emails from cisco... Is their SMTP server is dropping the connection too
soon because it is not waiting long enough for my server to go through the
filters?
This might be a big problem.. maybe my collegues are not receiv
it doesn't
have the "mailbox" parameter before the "redirect".
Hope this helps
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jayson Keidel
Sent: 28 avril 2008 17:46
To: xmail@xmailserver.org
Subject: [xmail] Aliases.tab
Un
rver, what
solutions I have then?
Thanks
-fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of CLEMENT Francis
Sent: 7 avril 2008 04:20
To: 'xmail@xmailserver.org'
Subject: [xmail] Re: SMTP auth on another server
>-Message d'origine
the smtp server is enough to replicate xmail's user base? Or I need to
copy the whole directory..
Anyone have any advice?
Thanks
-fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the lin
Hi all, i want to know if its possible to make xmail bcc every server
message its sends out? this way i would know if a mailbox is full, a message
has too many recipients or even if the message exceeds fixed maximum size ?
thank you
fred
-
To unsubscribe from this list: send the line
: command not found
../xmailquotamonitor.pl: line 98: chomp: command not found
../xmailquotamonitor.pl: line 104: syntax error near unexpected token `0,'
../xmailquotamonitor.pl: line 104: `Output (0, "XMQuotaMonitor");'
[EMAIL PROTECTED] bin]#
fred
-Original Message-
Fr
nd an email
to me so I can contact the user before he starts crying a river.
fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
Sorry,
make sure the "wait" command is on a new line, "echo "Starting XMail""
should be on a new line too.
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Fred
Sent: 29 avril, 2004 15:27
To: [EMAIL PROTECTED]
Subje
My Pleasure Ken, but make sure the "wait" command is on a new line, "exit 0"
should be on a new line too.
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Ken Larkman
Sent: 29 avril, 2004 15:23
To: [EMAIL PROTECTED]
Subject: [
Hi,
Make sure XMAIL_ROOT and path to SH is valid
#!/bin/sh
#
XMAIL_ROOT=/apps/MailRoot
echo "Killing XMail"
kill `ps -aux | grep XMail | grep -v grep | awk '{print $2}'`
wait
echo "Starting XMail"
$XMAIL_ROOT/bin/xmail start
exit 0
Hope this helps
Fred
-Orig
I agree with you too, but Shawn will have to write two scripts.
" Use .NET for Win32 and Perl/PHP for Unix-like system. "
If he wants to do it like this, go ahead, everyone will be happy hehe
Fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behal
cents and sorry for the terrible english
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Shawn Anderson
Sent: 28 avril, 2004 11:00
To: [EMAIL PROTECTED]
Subject: [xmail] Re: Xmail reports -- anyone have a wish list?
I am leaning towards .NET (and maybe
Hi,
Glad someone is thinking for writing a decent log analyzer! Here is what I
think should be in your project.
-Storing the data in a MySQL database?
-Will you release your software under the GPL?
-Written in PHP or Perl? No ASP please hehe
-User and domain alias support?
Will all these feature
I will add more rules for SA later.
Thanks in advance
Fred
-
To unsubscribe from this list: send the line "unsubscribe xmail" in
the body of a message to [EMAIL PROTECTED]
For general help: send the line "help" in the body of a message to
[EMAIL PROTECTED]
I received 1 email detected as loop too. I think the problem is with
ecartis.
Fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of RaveRod
Sent: 27 avril, 2004 19:21
To: [EMAIL PROTECTED]
Subject: [xmail] Mail loop detected?
5 emails I just received
Pose ta question pis le monde qui parle fran=E7ais t'aiderons.
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] =
On
Behalf Of [EMAIL PROTECTED]
Sent: 24 avril 2004 05:26
To: [EMAIL PROTECTED]
Subject: [xmail] Help me
lo,
je recherche de l'aide sur X
Hehehe no i do not see any zombies ;)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Davide Libenzi
Sent: 13 avril, 2004 13:09
To: [EMAIL PROTECTED]
Subject: [xmail] Re: XMail 1.18 (FreeBSD/Ix86) -- zombie?
On Tue, 13 Apr 2004, Fred wrote:
> My se
My setup is pretty basic, i am running 2 filters:
avfilter-1.9 and sa_filter-1.3
the only things mailproc.tab contains for some users is a simple redirect,
no custom domain or cmdaliases.
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Davide
Hi, i did try xmail-1.18 on freebsd-4.8 and it works like a charm. Been
running it since its released and everything is ok.
fred
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Davide Libenzi
Sent: 13 avril, 2004 12:33
To: XMail mailing list
Subject
Maybe something could be added in some file to prevent xmail from starting
if important configuration files hasn't been edited?
Eg:
$./xmail start
Impossible to start the server, RTFM.
$
2cents
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Don Drake
82 matches
Mail list logo