Hi Shawn,
After further exploration, I think this particular problem is
due to building CVS HEAD against the 2.5.1-dj5 kernel tree.
This seems to point out the ongoing liability of linking
stuff that lives in the kernel tree (a practice not thought
of kindly by Linus and other kernel developers
I have no problems getting my old Millennium 2064W card to do
sync_on_green, but no matter what I try I can't get my new AGP G200
Millennium card to do it. The old Sony monitor is not fixed frequency
so can handle different modelines no problem. Is sync_on_green even
supported on the agp car
I'm going to try tonight's HEAD snapshot and see if i get this result.
Shawn.
On 25 Dec 2001, Miles Lane wrote:
> Starting program: /usr/bin/X11/xterm
>
> Program received signal SIGSEGV, Segmentation fault.
> 0x40103d82 in XtInitializeWidgetClass () from /usr/X11R6/lib/libXt.so.6
> (gdb) bt
>
Starting program: /usr/bin/X11/xterm
Program received signal SIGSEGV, Segmentation fault.
0x40103d82 in XtInitializeWidgetClass () from /usr/X11R6/lib/libXt.so.6
(gdb) bt
#0 0x40103d82 in XtInitializeWidgetClass () from
/usr/X11R6/lib/libXt.so.6
#1 0x400b2fec in XawSimpleMenuAddGlobalActions (
Around 1 o'clock on Dec 26, Michel Van den Bergh wrote:
> HOWEVER the reply by zzz.zzz.zzz.zzz does not
> go to yyy.yyy.yyy.yyy but to 192.168.1.1 which is the private IP address
> of
> my internal lan interface eth0 and which is of course inaccessible from
> the outside.
You can fix this; pass
I reported a bug a while ago about the mouse pointer graphic getting out of
sync with the actual hot spot of the mouse pointer. I've since updated X
server and the problem is reduced but still present.
The problem isn't gone, however it's slightly changed. Instead of jumping 8
pixels and having
Hello,
I have a problem for Xperts.
I am running XFree86 v3.3.6a (video card is not supported by 4.x)
on RH 7.1.
I have the following problem. I have three network interfaces:
-eth0 with ip 192.168.1.1
-eth1 with ip xxx.xxx.xxx.xxx
-ppp0 with ip yyy.yyy.yyy.yyy (and peer zzz.zzz.zzz.zzz)
ppp0
Sebastian Hesselbarth wrote:
>
>
> is there a vga bios documentation for the s3virge mx(+) available?
> and where can i get it ?
>
> thanks & merry chistmas ... sebastian
S3 tells me they do not have ViRGE MX+ documentation available any
longer (well, at least not a full reference manual.) W
Around 14 o'clock on Dec 25, Richard Stallman wrote:
> Is there any platform-independent way of using fontsets
> and multibyte characters with Xlib?
Others may know better, but as far as I know, the multi-byte support in
Xlib is dependent on the ANSI/ISO C language locale model and hence relie
I'd like to internationalize Emacs menus.
XCreateFontSet and XmbDrawString seem to be designed
to use a locale defined by the host platform (i.e. by libc);
that doesn't help Emacs because it doesn't know what locales
the host supports or what they mean, so it can't find one
that is suitable.
Is
Hi,
I startet using Xinerama with KDE some time ago andxit works fine. I have problems
displaying True Type Fonst though. They are twice as wide as they should be. I have
searched for other people having this problem and found a few but no solution. Is
there a solution?
The problem is that my
Erm...hi, it's me - again.
Just finished another update. Mode restoration now (on my machine)
works, so you may use the sisfb and the new X driver at the same time.
There were changes in _both_ drivers, so you need to install them both.
Please read the information on http://www.webit.com/tw/li
is there a vga bios documentation for the s3virge mx(+) available?
and where can i get it ?
thanks & merry chistmas ... sebastian
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
13 matches
Mail list logo