Re: [yocto] PXE Boot NFS not working

Thanks a lot Alim for the detail step-by-step, for both modes. I'd like to stay with legacy mode with pxelinux.0 for now. I'm doing pretty much the same as what you described below, with exceptions - 1. I'm not using vesamenu.c32. Instead menu.32 is used, though I don't think that would

Re: [yocto] PXE Boot NFS not working

You are using PXE with legacy BIOS as you use pxelinux.0 . To configure PXE with legacy BIOS follow these instruction Note: PXE server IP = 192.168.1.2 Target IP = 192.168.1.1 On PXE server 1. make sure DHCP, NFS & TFTP services are up and running. 2. change the filename

Re: [yocto] PXE Boot NFS not working

Follow-up to my previous post, after seeing the reply below suggesting me not to use initramfs (but initrd is usable, right?). BTW, I don't use bootx64.efi. Instead, I use pxelinux.0 along with the other lib***.c32 files. 1. Is there a way to verify if GRUB (that I'm using) supports

Re: [yocto] New Recipe Integration Issue

On Thu, Apr 26, 2018 at 11:36 AM, Shakthi Pradeep (tpradeep) wrote: > Thanks for the info Andre. What you are suggesting it to be done while > building an application over these libraries right? No. The soname needs to be set when the library is linked. > Any idea why the

Re: [yocto] Weston Failure

> A log file (/var/log/weston.log)is mentioned in the western-start script file > . Western or Weston? I never saw anything as western, considering GFX (you mentioned western twice)?! Probably you meant Weston. Weston is Wayland backend, actually, Wayland is more of a GFX communication

Re: [yocto] New Recipe Integration Issue

Thanks for the info Andre. What you are suggesting it to be done while building an application over these libraries right? Any idea why the packaging is failing? Regards, Shakthi On 27/04/18, 12:00 AM, "Andre McCurdy" wrote: On Thu, Apr 26, 2018 at 11:03 AM, Shakthi

Re: [yocto] New Recipe Integration Issue

On Thu, Apr 26, 2018 at 11:03 AM, Shakthi Pradeep (tpradeep) wrote: > Hello Folks, > > I am trying to integrate an SDK which is very simple and small. Building the > SDK generates an executable and few .so libraries. > > “bitbake sdk” command goes through fine but when I run

[yocto] New Recipe Integration Issue

Hello Folks, I am trying to integrate an SDK which is very simple and small. Building the SDK generates an executable and few .so libraries. “bitbake sdk” command goes through fine but when I run “bitbake wrlinux-image-glibc-std” to generate an ISO with SDK packages I am get following error

Re: [yocto] yocto jethro failed on gettext-native

> I deleted all the build-imx6ulevk folder and build everything from > scratch with only one thread, waited a few hours for compilation and now > its working ;) Still, I am struggling to understand why??? What is the requirement behind this ask? As we see, it is much longer (one thread only)

Re: [yocto] yocto jethro failed on gettext-native

On 25/04/18, Andre McCurdy wrote: > On Wed, Apr 25, 2018 at 8:03 AM, Oliver Graute > wrote: > > Hello list, > > > > I try to compile yocto jethro environment which is working > > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04. > > > > The compilations stops

[yocto] Generation of images when using repository of signed rpm packages

Hello forum. I have two questions related with the generation of images when the distro is configured to use a repository of rpm packages signed with gpg. First question: after running the "bitbake my-image.bb" command, the build process stops with this message of error: ERROR: myimage-1.0-r0

[yocto] loopback interface not brought up on 'ifup -a' automatically

Hi, I am building an image using rocko branch and installing ifupdown package: http://cgit.openembedded.org/openembedded-core/tree/meta/recipes-core/ifupdown/ifupdown_0.8.16.bb?h=rocko If there is no loopback definition in /etc/network/interfaces file, then "ifup -a" brings lo interface up

[yocto] Weston Failure

Hi Sir , We are using weston (1.9.0) for loading our application on IMx6Q sabreauto board. sometimes it fails to start and sometime it works after reboot or after restart Weston services. I found that there is some synchronisation issue occurred in loading western service at the boot time. A

Re: [yocto] Configuring speed of SD card read

Can you elaborate little more. On Thu, Apr 26, 2018 at 12:24 PM, Nishina A. Pervin < nishina.per...@nestgroup.net> wrote: > Hi > > > > > > I am using yocto Krogoth build for imx6q Sabreauto board. > > > > What is the rate at which data is read from SD card? Can we configure it > for higher

Re: [yocto] PXE Boot NFS not working

Refer to my post here https://lists.yoctoproject.org/pipermail/yocto/2018-April/040860.html Don't use initramfs/initrd as it not working. Regards, Alim Hussin From: yocto-boun...@yoctoproject.org [mailto:yocto-boun...@yoctoproject.org] On Behalf Of Raymond Yeung Sent: Thursday, April 26,

[yocto] PXE Boot NFS not working

I've an Intel Xeon-D board. I could boot up the board with PXE booting. However, this seems to be always looking for "removable media"; if there is none, it would hang (in a .sh file). I want to explore NFS approach. So far, I've read up, experimented on NFS setup via pxelinux.cfg/default

[yocto] Configuring speed of SD card read

Hi I am using yocto Krogoth build for imx6q Sabreauto board. What is the rate at which data is read from SD card? Can we configure it for higher speed from Uboot or Kernel Awaiting your favorable reply Regards, Nishina Confidentiality Statement /