Hi,
and here ist the List-Address disc...@lists.illumos.org for your
question.
On Dezember, 20 2011, 21:27 Tomas Forsman wrote in [1]:
On 20 December, 2011 - Henry Lau sent me these 1,6K bytes:
Hi
When I run the following script from my illumos build 151,
./usr/src/tools/scripts/onu
Hello Stu Whitefish and List,
On August, 15 2011, 21:17 Stu Whitefish wrote in [1]:
7. cannot import old rpool (c0t2d0s0 c0t3d0s0), any attempt causes a
kernel panic, even when booted from different OS versions
Right. I have tried OpenIndiana 151 and Solaris 11 Express (latest
from Oracle)
Hello Bob Friesenhahn and List,
On August, 06 2011, 20:41 Bob Friesenhahn wrote in [1]:
I think that this depends on the type of hardware you have, how much
new data is written over a period of time, the typical I/O load on the
server (i.e. does scrubbing impact usability?), and how critical
Hello Roy Sigurd Karlsbakk and List,
On August, 07 2011, 19:27 Roy Sigurd Karlsbakk wrote in [1]:
Generally, you can't scrub too often. If you have a set of striped
mirrors, the scrub shouldn't take too long. The extra stress on the
drives during scrub shouldn't matter much, drives are made
Hello Bob Friesenhahn and List,
On August, 06 2011, 18:34 Bob Friesenhahn wrote in [1]:
Those using mirrors or raidz1 are best advised to perform periodic
scrubs. This helps avoid future media read errors and also helps
flush out failing hardware.
And what is your suggestion for scrubbing
Hello Rob Cohen and List,
On August, 06 2011, 17:32 Rob Cohen wrote in [1]:
In this case, RAIDZ is at least 8x slower to resilver (assuming CPU
and writing happen in parallel). In the mean time, performance for
the array is severely degraded for RAIDZ, but not for mirrors.
Aside from
Hello All,
is there a way where I can locking where a file on my pool is?
I mean is there a way where i can see where/on which HD zfs is saving a
file.
root@ripley:~# zpool list
NAMESIZE ALLOC FREECAP DEDUP HEALTH ALTROOT
archepool 5,44T 4,40T 1,04T80% 1.00x ONLINE -
Hello All
I read this thread Resilver/scrub times? for a few minutes
and I have recognize that I dont know the different between
Resilvering and Scrubing. Shame on me. :-(
I dont find some declarations in the man-pages and I know the command
to start scrubing zpool scrub tank
but what is the
Hello Erik Trimble and Ian Collins,
thx for quick answering.
My inexperience is solved and I am glad.
--
Best Regards
Alexander
Dezember, 20 2010
[1] mid:4d0fb4a4.1090...@oracle.com
___
zfs-discuss mailing list
at Dezember, 17 2010, 17:48 Lanky Doodle wrote in [1]:
By single drive mirrors, I assume, in a 14 disk setup, you mean 7
sets of 2 disk mirrors - I am thinking of traditional RAID1 here.
Or do you mean 1 massive mirror with all 14 disks?
Edward means a set of two-way-mirrors.
Do you
Hello All,
I want to build a home file and media server now. After experiment with a
Asus Board and running in unsolve problems I have bought this
Supermicro Board X8SIA-F with Intel i3-560 and 8 GB Ram
http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIA.cfm?IPMI=Y
also the LSI HBA
.
in mid:20101216195305.gz2...@reaktio.net geschrieben:
On Thu, Dec 16, 2010 at 08:43:02PM +0100, Alexander Lesle wrote:
Hello All,
I want to build a home file and media server now. After experiment with a
Asus Board and running in unsolve problems I have bought this
Supermicro Board X8SIA-F
Hello all,
now I have ordered this controller card from LSI
http://lsi.com/storage_home/products_home/host_bus_adapters/sas_hbas/internal/sas9211-8i/index.html
It has the same controller onboard as the Supermicro had.
The card is to plug in the PCI Express 2.0 x8 and the bracket is for
normal
Hello guys,
I want to built a new NAS and I am searching for a controller.
At supermicro I found this new one with the LSI 2008 controller.
http://www.supermicro.com/products/accessories/addon/AOC-USAS2-L8i.cfm?TYP=I
Who can confirm that this card runs under OSOL build134 or solaris10?
Why this
14 matches
Mail list logo
