> + dev=`echo $dev | sed 's/mirror.*/mirror/'`
Thanks for the suggestion Kurt. However, I'm not running a mirror on that pool
- so am guessing this won't help in my case.
I'll try and pick my way through the lulib script if I get any time.
Ben
--
This message posted from opensolaris.org
__
Hi,
As a related issue to this (specifically CR 6884728) - any ideas how I should
go about removing the old BE? When I attempt to run ludelete I get the
following:
$ lustatus
Boot Environment Is Active ActiveCanCopy
Name Complete NowOn Reb
Hi,
Quick update:
I left memtest running over night - 39 passes, no errors.
I also attempted to force the BIOS to run the memory at 800MHz & 5-5-5-15 as
suggested - but the machine became very unstable - long boot times; PCI-Express
failure of Yukon network card on booting etc. I've switched i
Hi,
It's an ASUS P5K-WS board with 2Gb of Corsair TwinX DDR2 8500 1066MHz Non-ECC
memory. The board uses the Intel P35 chipset - it also will not support ECC
RAM. TBH, this is probably the last time I'll get an ASUS, as this is the
second board I've got through - the first one died for no parti
Sent response by private message.
Today's findings are that the cksum errors appear on the new disk on the other
controller too - so I've ruled out controllers & cables. It's probably as Jeff
says - just got to figure out now how to prove the memory is duff.
Ben
This message posted from ope
Hi Marc,
Thanks for all of your suggestions.
I'll restart memtest when I'm next in the office and leave it running overnight.
I can recreate the pool - but I guess the question is am I safe to do this on
the existing setup, or am I going to hit the same issue again sometime?
Assuming I don't f
Hi,
Today's update:
- I ran a memtest a few times - no errors.
- I reseated, re-routed ad switched all connectors/cables
- I'm currently running a scrub, but it's showing vast numbers of cksum errors
now across all devices:
$ zpool status -v
pool: rpool
state: DEGRADED
status: One or more de
Thanks Marc - I'll run memtest on Monday, and re-seat memory/cpu//cards etc. If
that fails, I'll try moving the devices onto a different SATA controller.
Failing that I'll rebuild from scratch. Failing that, I'll get a new
motherboard!
Ben
This message posted from opensolaris.org
__
Hi Marc,
$ : > 09 - Check.mp3
bash: 09 - Check.mp3: I/O error
$ cd ..
$ rm -rf BAD
$ rm: cannot remove `BAD/09 - Check.mp3': I/O error
I'll try shuffling the cables - but as you see above it occasionally reports on
a different disk - so imagine the cables are OK. Also, the new disk I added has
Hello again,
I'm not making progress on this.
Every time I run a zpool scrub rpool I see:
$ zpool status -vx
pool: rpool
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in questi
Hi,
I can't seem to delete a file in my zpool that has permanent errors:
zpool status -vx
pool: rpool
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Other
Hi,
Sorry if this is a RTM issue - but I wanted to be sure before continuing. I
received a corrupted file error on one of my pools. I removed the file, and the
status command now shows the following:
> zpool status -v rpool
pool: rpool
state: ONLINE
status: One or more devices has experience
I've just purchased an Asus P5K WS, which seems to work OK. I had to download
the Marvell Yukon ethernet driver - but it's all working fine. It's also got a
PCI-X slot - so I have one of those Super Micro 8 port SATA cards - providing a
total of 16 SATA ports across the system. Other specs are o
13 matches
Mail list logo
