Here is the link to download LSIutil, which can be used to upgrade firmware:
http://www.lsi.com/cm/License.do?url=http://www.lsi.com/DistributionSystem/AssetDocument/LSIUtil_1.62.zip&prodName=LSI7104XP-LC&subType=Miscellaneous&locale=EN
And here again is the link to the 1.30 firmware:
http://www
On Wed, 2010-07-07 at 17:48 -0400, Jacob Ritorto wrote:
> Well, OK, but where do I find it?
>
> I'd still expect some problems with FCODE - vs. - BIOS issues if it's
> not SPARC firmware.
Ah, only if you are using the device to boot from. And in that case,
the low level boot code *should* be on
Well, OK, but where do I find it?
I'd still expect some problems with FCODE - vs. - BIOS issues if it's
not SPARC firmware.
thx
jake
On 07/07/10 17:46, Garrett D'Amore wrote:
On Wed, 2010-07-07 at 17:33 -0400, Jacob Ritorto wrote:
Thank goodness! Where, specifically, does one obtain this
On Wed, 2010-07-07 at 17:33 -0400, Jacob Ritorto wrote:
> Thank goodness! Where, specifically, does one obtain this firmware for
> SPARC?
Firmware is firmware -- it should not be host-cpu specific. (At least
one *hopes* not, although I *suppose* it is possible to have endian
specific interfaces
Thank goodness! Where, specifically, does one obtain this firmware for
SPARC?
On 07/07/10 17:04, Daniel Bakken wrote:
Upgrade the HBA firmware to version 1.30. We had the same problem, but
upgrading solved it for us.
Daniel Bakken
On Wed, Jul 7, 2010 at 1:57 PM, Joeri Vanthienen
mailto:m...
Upgrade the HBA firmware to version 1.30. We had the same problem, but
upgrading solved it for us.
Daniel Bakken
On Wed, Jul 7, 2010 at 1:57 PM, Joeri Vanthienen wrote:
> Hi,
>
> We're using the following components with snv134:
> - 1068E HBA (supermicro)
> - 3U SAS / SATA Expander Backplane wi
Hi,
We're using the following components with snv134:
- 1068E HBA (supermicro)
- 3U SAS / SATA Expander Backplane with dual LSI SASX28 Expander Chips
(supermicro)
- WD RE3 disks
We've got the following error messages:
Jul 7 10:09:12 sanwv01 scsi: [ID 107833 kern.warning] WARNING:
/p...@0,0
