Hello All, I'm not sure what you tried for the default User IDs and passwords but according to this Web site (http://www.phenoelit.de/dpl/dpl.html), the default User IDs passwords for the 3COM SuperStack II Switches are as follows:
2200 - debug/synnet 2700 - tech/tech Regards, David [EMAIL PROTECTED] -----Original Message----- From: Marc Eiler (Volt) [mailto:[EMAIL PROTECTED]] Sent: March 6, 2002 2:17 PM To: Thiago Mello; [EMAIL PROTECTED] Subject: RE: 3com Superstack II Indio, After reading some documentation on 3COM's web site, I found that the only way to recover the password is if the switch was set up to allow password recovery. If it is not, then you have to send it back to 3COM where, I suspect, they will send it back to you with the password set to blank for the user ADMIN. Here is a link to the document that outlines how to reset the password provided the switch has been configured for it: http://support.3com.com/infodeli/tools/switches/ss3/4400/htmcli/securitydevi ceusermodify.htm You might also try doing your own search of 3COM's web site if you haven't already. You might be able to think of some better key-words to search on in order to get better results. I tried using "password", "lost", "recover", and "superstack" in different combinations. It appears that 3COM doesn't support the SuperStack II switches anymore and has very little documentation about them. Hope this helps. Virtually, MarC Eiler -----Original Message----- From: Thiago Mello [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 6:15 PM To: [EMAIL PROTECTED] Subject: 3com Superstack II I�ve bought at little time a 3 com SuperStack II Router, and it did came with his passwords, this router is not brand new, its already used and the old owner do not have it�s password, I already tried the defaults passwords, but until now, no good results. Does anybody can help me? Thanks. indio! *This e-mail is under protection (Virus Checked)
