Hi,
Can you please post a quick description of your configuration and the
result of the following one-line command ?
grep -v ^$ /etc/shorewall/{zones,interfaces,masq,tunnels,policy,rules}
|grep -v :#
also, if you have a problem with the proxy, please also post the contents
of the /etc/squid/squid.conf file ...
thx,
>tim taplin <[EMAIL PROTECTED]> writes:
> So I have a really wierd one I think. Running MNF on my system for about
> a week testing config with 4 computers on the lan with no problems. I'm
> using it only for the transparent proxy setup right now so I'm allowing
> all thru the firewall both ways.
>
> My plan is to use it to even out the load on one of our wireless ISP
> subnets but the traffic coming in across the wireless bridges doesn't
> appear to be routed properly. I can manually proxy but the transparent
> proxy traffic is apparently dropped. Apparently because I can not find
> any logs showing an error or dropped traffic. These clients are using the
> same ip subnet that my local computers are using and connected to the MNF
> thru the same hub. The local computers on the same IP subnet utilize the
> transparent proxy just fine and can ping, telnet, ftp, ssh to the outside
> world while those coming in from the wireless bridge can't do anything
> without a manual proxy setting.
>
> Any ideas on where to look for more information on what the problem might
> be? I had tested this setup with NAT turned on previously but its been
> removed. Could this be part of my problem and where could I look to find
> out? If my default policy is allow all to all, Can I delete all of the
> rules? or are some of them required for the transparent proxy to work?
--
Florin http://www.mandrakesoft.com
http://people.mandrakesoft.com/~florin/
____________________________________________________
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________
