"Patrick McDonald" <[EMAIL PROTECTED]> writes: > Thanks Florin, > > But I think that every time I go in to that part during the last bit of the > install (I know where you're talking about) it forces me to pick one network > card or the other. I can configure them both, but it still seems to only > pick one.
I managed to setup my 9 NICS in that way during the install ... > I will, however, go back and look at it again to make sure I'm just not > being completely stupid about it =) > Thanks, > Patrick > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Florin > Sent: Tuesday, January 25, 2005 10:37 AM > To: [email protected] > Subject: Re: [Security Firewall] MNF 2 Setup > > "Patrick McDonald" <[EMAIL PROTECTED]> writes: > > > Hello, > > > > I'm having a problem with MNF 2. I am trying to use an onboard Intel > > Ethernet adapter and a USB network adapter. In MNF1, I had to install an > > update for the kernel to recognize the USB adapter, but MNF2 picks it up > > automatically, which is awesome. However, during the install process, I > can > > not set up more than one network card. > > not true ... the install process will force you to setup at least one > network device so you can use the remote web interface after the boot. > However, at the end of the install you have a summary and there you can > go to the network section and reconfigure the network and add/remove other > devices ... > Please keep in mind that only the network configuration during the install > will be read by the web interface. The dsl setup has to be (re)done using > the web interface ... > > > I will have to lug in the usb > > network card, set it up, unplug it after the install, start the pc and > > configure the on-board that it detects, reboot, plug the usb adapter back > > in, configure it when it detects it, and what happens is that either it or > I > > get confused about which network card is what interface with what IP > > address, and I end up just quitting in frustration. > > > > Any way to set up both network adapters in the install? > > > > TIA, > > Patrick -- Florin http://www.mandrakesoft.com http://people.mandrakesoft.com/~florin/
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
