Two Questions
1. Any sign of draft documentation being released any time soon? Probably save a lot of the questions you are answering here (including mine!!).
2. I am unsure of something in my setup that is causing problems. My setup looks like this:
192.168.1.0/24 Home Lan--------->192.168.1.200/24MNF eth1----------->MNF eth2 192.168.10.30/24---------->192.168.10.1/24 (LAN Interface) DSL Router 213.202.xx.xx (DSL Interface)----->Internet
All works well except my OpenVPN. My tun interface on MNF2 has an address of 10.1.0.1 and 10.1.0.2 on the client.
The DSL router has a build in firewall. I can NAT incoming traffic to allow it through. My question is, should I put a NAT rule to allow port 5000 through to 192.168.10.1 or 10.1.0.1. I'm not sure which? Neither seems to work. The client always times out waiting to connect.
Any advice appreciated.
Dj.
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
