Dj <[EMAIL PROTECTED]> writes: > Hi Florin, > Two Questions > 1. Any sign of draft documentation being released any time soon? Probably > save a lot of the questions you are answering here (including mine!!). > > 2. I am unsure of something in my setup that is causing problems. My > setup looks like this: > > 192.168.1.0/24 Home Lan--------->192.168.1.200/24MNF eth1----------->MNF > eth2 192.168.10.30/24---------->192.168.10.1/24 (LAN Interface) DSL Router > 213.202.xx.xx (DSL Interface)----->Internet > > All works well except my OpenVPN. My tun interface on MNF2 has an address > of 10.1.0.1 and 10.1.0.2 on the client. > > The DSL router has a build in firewall. I can NAT incoming traffic to > allow it through. My question is, should I put a NAT rule to allow port > 5000 through to 192.168.10.1 or 10.1.0.1. I'm not sure which? Neither > seems to work. The client always times out waiting to connect. Any advice > appreciated. > Dj.
the way I see it is the following: you want to bypass your dsl router and make mnf appear to the outside world as the dsl router (at least for openvpn operations), so you need to dnat the incoming packagets on 213.202.xx.xx (the openvpn port) to the mnf external interface IP, which is 192.168.10.30 (eth2) if I understand correctly. my 2cts, -- Florin http://www.mandrakesoft.com http://people.mandrakesoft.com/~florin/
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
