mario

you certainly havtested all possibilities! the most likely errro is with parameter file, it must srictly have the format given lik eeverythin in correct column and no tabs. E.g. station ALJ below is wrongly formatted.

The "preprocess.inf" and "AUTOPIC.INF must be some leftover for very early versions, all info should be in manual

please send data file, parameter file and waveform file if you do not find the problem

jens
On Tue, 24 Jan 2012, Mario Ruiz Fernandez wrote:

Dear all,

I'm trying to use AUTOPIC program by typing Z on eev (9.0.1 distribution),
but command does anything on my dataset. I don't understand why because with
example dataset coming in TEST database it works perfectly well!


I updated AUTOPIC.INP introducing the list of stations to be analysed:


% STATIONS TO USE IN THE PROCESSING
% ----------------------------------------------------------------------
*ACBG B  Z 3 component
*ACLR B  Z 3 component
*ALHU H  Z 3 component
*ALJ H  Z 3 component
*ANER B  Z 3 component
*ARAC B  Z 3 component
*ASCB B  Z 3 component
*E001 H  Z 3 component
*E002 H  Z 3 component
*E005 H  Z 3 component
*E006 H  Z 3 component
*E007 H  Z 3 component
*E008 H  Z 3 component
*E009 H  Z 3 component
*E010 H  Z 3 component
*E011 H  Z 3 component
*E012 H  Z 3 component
*E013 H  Z 3 component
*E015 H  Z 3 component
*E017 H  Z 3 component
*E018 H  Z 3 component
*E019 H  Z 3 component
etc...


But when I press Z, I only obtain the following message:

#   18  6 Nov 2008 12:50 45  L  37.019  -5.409 21.0  N .82 3.2bIGN   29  ? Z

 *******************************************************
 ****                                               ****
 ****                AUTOPIC routine                ****
 ****                                               ****
 *******************************************************
 /home/mario/Seisan_9.0.1/Seismo/REA/IBER_/2008/11/06-1250-45L.S200811
?? ?
  waveform 
file:/home/mario/Seisan_9.0.1/Seismo/WAV/IBER_/2008/11/2008-11-06-1250-45S.mseed

 multiplexed

 /home/mario/Seisan_9.0.1/Seismo/DAT/AUTOPIC.INP

  Output written to autopic.out


Nothing else! Any "detasso.*" file is generated and "autopic.out" only
contains these 3 lines:

 Reading waveforms from 
file :/home/mario/Seisan_9.0.1/Seismo/WAV/IBER_/2008/11/2008-11-06-1250-45S.msee
d
 Parameter settings in file :/home/mario/Seisan_9.0.1/Seismo/DAT/AUTOPIC.INP
 Parameter explanation in file:AUTOPIC.INF


I also did two tests to rule out any problem with our waveform data and/or
with the file size (multiplexed mseed files containing 95 stations with 3
channels each one with sampling rates of 100, 50 and 20sps):

1) I converted one of the mseed files to seisan format with "wavetool" and
introduced the new waveform file in S-file. 2) I split the same mseed file
in all thier channels and stations using "seisei" command and introduced
only the Z channel of best station in s-file, but the result is the same.
Any pick is obtained.


I'm wondering if I'm doing any mistake on station description in AUTOPIC.INP
file. Must they be sorted? Are spaces relevant? Where could I find
"preprocess.inf" and "AUTOPIC.INF" files to have a complete explanation of
all the formats and parameters needed? I'm not able to find them in my
Seisan distributions (9.0.1, 8.3 or 8.2.1) ...

Best regards,
Mario

--
------------------------------------------------------------
 Mario Ruiz Fernandez

Dep. d'Estructura i Dinamica de la Terra
Institut de Ciencies de la Terra 'Jaume Almera' ICTJA-CSIC
c/ Lluis Sole Sabaris s/n 08028 Barcelona (Spain)

Tel.:     +34 93 409 54 10
Fax:      +34 93 411 00 12
E-mail:   [email protected]

www:      http://www.ictja.csic.es/edt/
          http://www.tdx.cat/handle/10803/1923
------------------------------------------------------------

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to