Hi Branden,
your channel name seems to have a '0' in 3rd place, which means you also
need to have that in the condet.par file.
Hope that will fix it.
Regards,
Lars
On 09/12/2012 05:20 AM, Branden Christensen wrote:
Hi all:
Buenos dias.
I am attempting to run condet for some of my data. The condet.par and
SEISAN.def files have been included below.
I run into the following snag:
osop@queretaro:/opt/seismo/WOR/osop$ condet
16 stations
201111151920 start date
201111151950 stop date
CAR detection algorithm
F waveout
15.000000 interval to read (minutes)
1.0000000 filter low
5.0000000 filter high
10.000000 min trigger interval (seconds)
120.00000 extract duration (seconds)
30.000000 pre event time (seconds)
STA AND CARL ONLY PARAMETERS:
1.0000000 sta duration
8.0000000 lta duration
0.0000000 trigger ratio
0.0000000 detrigger ratio
1.0000000 min trigger duration
CARL ONLY PARAMETERS:
2.3000000 carl ratio
4.0000000 carl quiet
2011 11 Reading events from base NI01Z 603
Channel # and name not defined in def file: 1 NI01 SH0Z
start time: 2011/11/15 19:20: 0.00
stop time: 2011/11/15 19:35: 0.00
2011 11 Reading events from base NI01Z 603
Channel # and name not defined in def file: 1 NI01 SH0Z
Channel # and name not defined in def file: 1 NI01 SH0Z
start time: 2011/11/15 19:35: 0.00
stop time: 2011/11/15 19:50: 0.00
2011 11 Reading events from base NI03Z 605
Channel # and name not defined in def file: 1 NI03 SH0Z
...
condet.par:
#
# condet.par: condet input parameter file, comments can be added to this
file,
# but the comments must not match a KEYWORD
#
KEYWORD............Comments.............Par 1.....Par 2
STATION NI01Z NI01 SH Z
STATION 5 char code NI03Z NI03 SH Z
STATION 5 char code NI05Z NI05 SH Z
STATION 5 char code NI08Z NI08 SH Z
STATION 5 char code NI10Z NI10 SH Z
STATION 5 char code ND04Z ND04 SH Z
STATION 5 char code ND05Z ND05 SH Z
STATION 5 char code ND06Z ND06 SH Z
STATION 5 char code ND07Z ND07 SH Z
STATION 5 char code ND08Z ND08 SH Z
STATION 5 char code ND09Z ND09 SH Z
STATION 5 char code COYC COYC BH Z
STATION 5 char code EFI EFI BH Z
STATION 5 char code PEL PEL BH Z
STATION 5 char code GO09 GO09 BH Z
STATION 5 char code PLCA PLCA BH Z
START DATE yyyymmddhhmmss 201111151920
STOP DATE yyyymmddhhmmss 201111151950
WAVEOUT 1.=write out wave 0.
EXTRACT DURATION in seconds 120.
PRE EVENT TIME in seconds 30.
INTERVAL length of data 15.
segments read (min)
DET ALGORITHM STALTA or CARL CAR
STA LENGTH in seconds 1.
LTA LENGTH in seconds 10.
MIN TRIG DURATION 1.
MIN TRIG INTERVAL 10.
FILTER LOW 0. for no filter 1.
FILTER HIGH 0. for no filter 5.
#
# STALTA settings
#
TRIGGER RATIO 3.
DETRIGGER RATIO 2.
FREEZE LTA 1.=to keep LTA 0.
when trigger
#
# CARL settings
#
CARL RATIO 2.3
CARL QUIET 4.0
#
# COR settings
#
CORRELATION MIN 0.8
#
# network detection
#
NET MIN DET 3.
NET WINDOW SEC 10.
SEISAN.DEF
KEYWORD............Comments.............Par 1.....Par 2
CONT_BASE REA continuous base NI01Z 1.
CONT_BASE REA continuous base NI01N 1.
CONT_BASE REA continuous base NI01E 1.
CONT_BASE REA continuous base NI03Z 1.
CONT_BASE REA continuous base NI03N 1.
CONT_BASE REA continuous base NI03E 1.
CONT_BASE REA continuous base NI05Z 1.
CONT_BASE REA continuous base NI05N 1.
CONT_BASE REA continuous base NI05E 1.
CONT_BASE REA continuous base NI08Z 1.
CONT_BASE REA continuous base NI08N 1.
CONT_BASE REA continuous base NI08E 1.
CONT_BASE REA continuous base NI10Z 1.
CONT_BASE REA continuous base NI10N 1.
CONT_BASE REA continuous base NI10E 1.
CONT_BASE REA continuous base ND04Z 1.
CONT_BASE REA continuous base ND04N 1.
CONT_BASE REA continuous base ND04E 1.
CONT_BASE REA continuous base ND05Z 1.
CONT_BASE REA continuous base ND05N 1.
CONT_BASE REA continuous base ND05E 1.
CONT_BASE REA continuous base ND06Z 1.
CONT_BASE REA continuous base ND06N 1.
CONT_BASE REA continuous base ND06E 1.
CONT_BASE REA continuous base ND07Z 1.
CONT_BASE REA continuous base ND07N 1.
CONT_BASE REA continuous base ND07E 1.
CONT_BASE REA continuous base ND08Z 1.
CONT_BASE REA continuous base ND08N 1.
CONT_BASE REA continuous base ND08E 1.
CONT_BASE REA continuous base ND09Z 1.
CONT_BASE REA continuous base ND09N 1.
CONT_BASE REA continuous base ND09E 1.
CONT_BASE REA continuous base PLCA 1.
CONT_BASE REA continuous base EFI 1.
CONT_BASE REA continuous base COYC 1.
CONT_BEFORE start min before 0.
CONT_AFTER start min after 0.
CONT_INT_S Small time interval 120.
CONT_INTERVAL Time interval 300.
HIGH_ACCURACY 1.
MERGE_WAVEFORM LIC
HERKIJ_DISTANCE 100.0
CURSOR 2
Thanks for any insights!
*Branden C. Christensen*
Director, OSOP
*[email protected] <mailto:[email protected]>*
www.osop.com.pa <http://www.osop.com.pa>
Volcan, Panama
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
--
Lars Ottemøller
Associate Professor
Department of Earth Science
University of Bergen
Allegt. 41
5007 Bergen
NORWAY
Phone +47 5558 2616
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan