Lars:

I have finally had a chance to play with this. You were 100% correct. I
needed to change from SH Z to SH0Z.


Thanks a million things are now working great.


Saludos,

*Branden C. Christensen*
Director, OSOP
*[email protected]*
www.osop.com.pa
Volcan, Panama





On Wed, Sep 12, 2012 at 7:17 AM, Lars Ottemoller <[email protected]> wrote:

> Hi Branden,
>
> your channel name seems to have a '0' in 3rd place, which means you also
> need to have that in the condet.par file.
>
> Hope that will fix it.
>
> Regards,
> Lars
>
>
> On 09/12/2012 05:20 AM, Branden Christensen wrote:
>
>> Hi all:
>>
>>
>> Buenos dias.
>>
>> I am attempting to run condet for some of my data. The condet.par and
>> SEISAN.def files have been included below.
>>
>> I run into the following snag:
>>
>> osop@queretaro:/opt/seismo/**WOR/osop$ condet
>>            16  stations
>>   201111151920   start date
>>   201111151950   stop date
>>   CAR        detection algorithm
>>   F  waveout
>>     15.000000      interval to read (minutes)
>>     1.0000000      filter low
>>     5.0000000      filter high
>>     10.000000      min trigger interval (seconds)
>>     120.00000      extract duration (seconds)
>>     30.000000      pre event time (seconds)
>>   STA AND CARL ONLY PARAMETERS:
>>     1.0000000        sta duration
>>     8.0000000        lta duration
>>     0.0000000        trigger ratio
>>     0.0000000        detrigger ratio
>>     1.0000000        min trigger duration
>>   CARL ONLY PARAMETERS:
>>     2.3000000        carl ratio
>>     4.0000000        carl quiet
>>   2011 11 Reading events from base NI01Z  603
>>   Channel # and name not defined in def file:   1 NI01  SH0Z
>>   start time: 2011/11/15 19:20: 0.00
>>   stop time:  2011/11/15 19:35: 0.00
>>   2011 11 Reading events from base NI01Z  603
>>   Channel # and name not defined in def file:   1 NI01  SH0Z
>>   Channel # and name not defined in def file:   1 NI01  SH0Z
>>   start time: 2011/11/15 19:35: 0.00
>>   stop time:  2011/11/15 19:50: 0.00
>>   2011 11 Reading events from base NI03Z  605
>>   Channel # and name not defined in def file:   1 NI03  SH0Z
>> ...
>>
>>
>> condet.par:
>> #
>> # condet.par: condet input parameter file, comments can be added to this
>> file,
>> #             but the comments must not match a KEYWORD
>> #
>>
>> KEYWORD............Comments...**..........Par 1.....Par 2
>>
>> STATION                                      NI01Z     NI01  SH Z
>> STATION            5 char code          NI03Z     NI03  SH Z
>> STATION            5 char code          NI05Z     NI05  SH Z
>> STATION            5 char code          NI08Z     NI08  SH Z
>> STATION            5 char code          NI10Z     NI10  SH Z
>> STATION            5 char code          ND04Z     ND04  SH Z
>> STATION            5 char code          ND05Z     ND05  SH Z
>> STATION            5 char code          ND06Z     ND06  SH Z
>> STATION            5 char code          ND07Z     ND07  SH Z
>> STATION            5 char code          ND08Z     ND08  SH Z
>> STATION            5 char code          ND09Z     ND09  SH Z
>> STATION            5 char code          COYC      COYC  BH Z
>> STATION            5 char code          EFI       EFI   BH Z
>> STATION            5 char code          PEL       PEL   BH Z
>> STATION            5 char code          GO09      GO09  BH Z
>> STATION            5 char code          PLCA      PLCA  BH Z
>>
>> START DATE         yyyymmddhhmmss       201111151920
>> STOP DATE          yyyymmddhhmmss       201111151950
>> WAVEOUT            1.=write out wave    0.
>> EXTRACT DURATION   in seconds           120.
>> PRE EVENT TIME     in seconds           30.
>> INTERVAL           length of data       15.
>>                     segments read (min)
>>
>> DET ALGORITHM      STALTA or CARL       CAR
>> STA LENGTH         in seconds           1.
>> LTA LENGTH         in seconds           10.
>> MIN TRIG DURATION                       1.
>> MIN TRIG INTERVAL                       10.
>> FILTER LOW         0. for no filter     1.
>> FILTER HIGH        0. for no filter     5.
>>
>> #
>> # STALTA settings
>> #
>> TRIGGER RATIO                           3.
>> DETRIGGER RATIO                         2.
>> FREEZE LTA         1.=to keep LTA       0.
>>                     when trigger
>>
>> #
>> # CARL settings
>> #
>> CARL RATIO                              2.3
>> CARL QUIET                              4.0
>> #
>> # COR settings
>> #
>> CORRELATION MIN                         0.8
>>
>> #
>> # network detection
>> #
>> NET MIN DET                             3.
>> NET WINDOW SEC                          10.
>>
>>
>> SEISAN.DEF
>> KEYWORD............Comments...**..........Par 1.....Par 2
>> CONT_BASE          REA continuous base  NI01Z     1.
>> CONT_BASE          REA continuous base  NI01N     1.
>> CONT_BASE          REA continuous base  NI01E     1.
>> CONT_BASE          REA continuous base  NI03Z     1.
>> CONT_BASE          REA continuous base  NI03N     1.
>> CONT_BASE          REA continuous base  NI03E     1.
>> CONT_BASE          REA continuous base  NI05Z     1.
>> CONT_BASE          REA continuous base  NI05N     1.
>> CONT_BASE          REA continuous base  NI05E     1.
>> CONT_BASE          REA continuous base  NI08Z     1.
>> CONT_BASE          REA continuous base  NI08N     1.
>> CONT_BASE          REA continuous base  NI08E     1.
>> CONT_BASE          REA continuous base  NI10Z     1.
>> CONT_BASE          REA continuous base  NI10N     1.
>> CONT_BASE          REA continuous base  NI10E     1.
>> CONT_BASE          REA continuous base  ND04Z     1.
>> CONT_BASE          REA continuous base  ND04N     1.
>> CONT_BASE          REA continuous base  ND04E     1.
>> CONT_BASE          REA continuous base  ND05Z     1.
>> CONT_BASE          REA continuous base  ND05N     1.
>> CONT_BASE          REA continuous base  ND05E     1.
>> CONT_BASE          REA continuous base  ND06Z     1.
>> CONT_BASE          REA continuous base  ND06N     1.
>> CONT_BASE          REA continuous base  ND06E     1.
>> CONT_BASE          REA continuous base  ND07Z     1.
>> CONT_BASE          REA continuous base  ND07N     1.
>> CONT_BASE          REA continuous base  ND07E     1.
>> CONT_BASE          REA continuous base  ND08Z     1.
>> CONT_BASE          REA continuous base  ND08N     1.
>> CONT_BASE          REA continuous base  ND08E     1.
>> CONT_BASE          REA continuous base  ND09Z     1.
>> CONT_BASE          REA continuous base  ND09N     1.
>> CONT_BASE          REA continuous base  ND09E     1.
>> CONT_BASE          REA continuous base  PLCA      1.
>> CONT_BASE          REA continuous base  EFI       1.
>> CONT_BASE          REA continuous base  COYC      1.
>>
>> CONT_BEFORE        start min before     0.
>> CONT_AFTER         start min after      0.
>> CONT_INT_S         Small time interval  120.
>> CONT_INTERVAL      Time interval        300.
>> HIGH_ACCURACY                           1.
>> MERGE_WAVEFORM                          LIC
>> HERKIJ_DISTANCE                         100.0
>> CURSOR                                  2
>>
>>
>>
>> Thanks for any insights!
>>
>>
>> *Branden C. Christensen*
>> Director, OSOP
>> *[email protected].**pa <[email protected]><mailto:
>> branden.christensen@**osop.com.pa <[email protected]>>*
>> www.osop.com.pa <http://www.osop.com.pa>
>> Volcan, Panama
>>
>>
>>
>>
>>
>> ______________________________**_________________
>> seisan mailing list
>> [email protected]
>> http://mailman.uib.no/**listinfo/seisan<http://mailman.uib.no/listinfo/seisan>
>>
>>
> --
> Lars Ottemøller
> Associate Professor
> Department of Earth Science
> University of Bergen
> Allegt. 41
> 5007 Bergen
> NORWAY
> Phone +47 5558 2616
>
> ______________________________**_________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/**listinfo/seisan<http://mailman.uib.no/listinfo/seisan>
>
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to