Hi Andrey,

Maximize window does not work on SEISAN for linux/unix. 
You can maximum set X_SCREEN_SIZE to 100 (which is 100% of 1024). 1024 is the 
hardcoded resolution in SEISAN, so to get full screen you need to increase the 
1024 in the source code, with the resolution of your monitor and then 
recompile. But, be careful and cross check that the time of your phase picking 
is still ok.

Good luck, Peter

-----Oprindelig meddelelse-----
Fra: [email protected] [mailto:[email protected]] På vegne af 
Andrey Stepnov
Sendt: 15. november 2012 02:16
Til: Emanuel Antunes
Cc: [email protected]
Emne: Re: [seisan] graphical issue on high resolution (mulplt, etc)

Hi, Emanuel!

We did it on windows (with putty and xming) and linux workstation - the same 
result.
It appears only if we do maximize  window.
I attach two more screenshots: before maximize and after (mulplt) + xclock and 
xcalc in maximize.

mulplt.def is like default according resolutions and screen size parametrs. But 
i think that it's no reason, because epimap has the same problem.

Best regards,
Andrey

On 15.11.2012 11:18, Emanuel Antunes wrote:
> Hello Andrey,
> 
> That is most peculiar. Right now I am running mulplt on a 1080p screen 
> via SSH with X forward on a Windows system with Xming and PuTTY, I 
> never had any issues like that. I am running X.Org X Server 1.12.3 on 
> a Debian machine on the server side.
> I also use on a daily basis ssh with X forward on a MacOSX with 720p 
> and haven't gotten any issues, I think that if I tried it with a 1080p 
> on a mac I wouldn't get any problems either.
> Have you tried accessing via ssh from another client? My guess is the 
> issue could be on the client side. But I understand that you might 
> think it's an issue with SEISAN configuration as xterm and xclock work 
> ok when you fullscreen them.
> On my case I never messed with the screen or resolution parameters on 
> SEISAN so it's just like when I compiled it...
> I hope someone has a more meaningul insight, on the matter.
> 
> Good luck,
> 
> Emanuel Antunes
> --
> MSc Student at IST-Lisbon Technical University Seismology Laboratory
> 
> Em 14-11-2012 23:52, Andrey Stepnov escreveu:
>> Dear Friends!
>>
>> We use seisan on linux with xorg-server 1.12.3-1. Operators takes 
>> access via ssh + x forward. So, some operators uses monitors whith 
>> resolution
>> 1920x1080 and higher. If operator try to maximize X window (for 
>> example mulplt), they get blank area on right side, although the 
>> buttons under blank area is still works.
>> Other app (xterm, xclock) works fine.
>>
>> On attached screenshot i have marked the problem.
>>
>> We try to change X_SCREEN_SIZE, RESOLUTIONX, RESOLUTIONHC parametrs.
>>  X_SCREEN_SIZE (par1) have set to 90, 80, 100
>>
>>
>> thanks.
>>
>>
>> Best regards,
>> Andrey Stepnov
>> IMGG FEB RAS
>>
>>
>> _______________________________________________
>> seisan mailing list
>> [email protected]
>> http://mailman.uib.no/listinfo/seisan
> 

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to