Thanks Peter!
I'll try.

Best regards,
Andrey

On 15.11.2012 23:25, Voss, Peter wrote:
> Hi Andrey,
> 
> Maximize window does not work on SEISAN for linux/unix. 
> You can maximum set X_SCREEN_SIZE to 100 (which is 100% of 1024). 1024 is the 
> hardcoded resolution in SEISAN, so to get full screen you need to increase 
> the 1024 in the source code, with the resolution of your monitor and then 
> recompile. But, be careful and cross check that the time of your phase 
> picking is still ok.
> 
> Good luck, Peter
> 
> -----Oprindelig meddelelse-----
> Fra: [email protected] [mailto:[email protected]] På vegne af 
> Andrey Stepnov
> Sendt: 15. november 2012 02:16
> Til: Emanuel Antunes
> Cc: [email protected]
> Emne: Re: [seisan] graphical issue on high resolution (mulplt, etc)
> 
> Hi, Emanuel!
> 
> We did it on windows (with putty and xming) and linux workstation - the same 
> result.
> It appears only if we do maximize  window.
> I attach two more screenshots: before maximize and after (mulplt) + xclock 
> and xcalc in maximize.
> 
> mulplt.def is like default according resolutions and screen size parametrs. 
> But i think that it's no reason, because epimap has the same problem.
> 
> Best regards,
> Andrey
> 
> On 15.11.2012 11:18, Emanuel Antunes wrote:
>> Hello Andrey,
>>
>> That is most peculiar. Right now I am running mulplt on a 1080p screen 
>> via SSH with X forward on a Windows system with Xming and PuTTY, I 
>> never had any issues like that. I am running X.Org X Server 1.12.3 on 
>> a Debian machine on the server side.
>> I also use on a daily basis ssh with X forward on a MacOSX with 720p 
>> and haven't gotten any issues, I think that if I tried it with a 1080p 
>> on a mac I wouldn't get any problems either.
>> Have you tried accessing via ssh from another client? My guess is the 
>> issue could be on the client side. But I understand that you might 
>> think it's an issue with SEISAN configuration as xterm and xclock work 
>> ok when you fullscreen them.
>> On my case I never messed with the screen or resolution parameters on 
>> SEISAN so it's just like when I compiled it...
>> I hope someone has a more meaningul insight, on the matter.
>>
>> Good luck,
>>
>> Emanuel Antunes
>> --
>> MSc Student at IST-Lisbon Technical University Seismology Laboratory
>>
>> Em 14-11-2012 23:52, Andrey Stepnov escreveu:
>>> Dear Friends!
>>>
>>> We use seisan on linux with xorg-server 1.12.3-1. Operators takes 
>>> access via ssh + x forward. So, some operators uses monitors whith 
>>> resolution
>>> 1920x1080 and higher. If operator try to maximize X window (for 
>>> example mulplt), they get blank area on right side, although the 
>>> buttons under blank area is still works.
>>> Other app (xterm, xclock) works fine.
>>>
>>> On attached screenshot i have marked the problem.
>>>
>>> We try to change X_SCREEN_SIZE, RESOLUTIONX, RESOLUTIONHC parametrs.
>>>  X_SCREEN_SIZE (par1) have set to 90, 80, 100
>>>
>>>
>>> thanks.
>>>
>>>
>>> Best regards,
>>> Andrey Stepnov
>>> IMGG FEB RAS
>>>
>>>
>>> _______________________________________________
>>> seisan mailing list
>>> [email protected]
>>> http://mailman.uib.no/listinfo/seisan
>>

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to