Hi, all,

I am using SEISAN v9.1 on a 64-bit LINUX computer.  When I try to locate an 
event, either from within eev or on the command line, I always get zero depth - 
no matter what I do: try fixing depth with 'F' in column 43 on the epicenter 
line, set starting depth to various depths in the control line of STATION0.HYP, 
giving the routine a range of trial depths on the control line, making sure 
that RESET TEST(31)=3.0 and RESET TEST(96)=1.0.  Also, I've tried using 
'generic' phase codes (P, S) and specific codes for these crustal phases (Pg, 
Sg) with no changes.

I am at a loss of what else to try.  If anyone has any ideas, I would greatly 
appreciate hearing them.  I've included my sfile and STATION0.HYP in case an 
obvious problem can be seen in them.

=============================================================
N. Seth Carpenter
Seismologist
Kentucky Geological Survey
228 MMRB, University of Kentucky
Lexington, Kentucky 40506-0107
(859) 323-0563
[email protected]

Attachment: 10-1707-51L.S201211
Description: 10-1707-51L.S201211

Attachment: STATION0.HYP
Description: STATION0.HYP

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to