Hello Jens,
Thank you very much for your help. Now, I could see more reasonble depth values
and as a consecuence, low RMS.
I just checked the seisan manual on page 99 and I noticed that the format for
this control line doesn't take into account the format for:
number of start depths
start depth of range of start depths
increment in start depths
they are only mentioned.
I also checked the hypocenter manual, however, this has neither the name of
this parameters nor the format of them. Could you please let me know the
complete format of this line?
Thanks again.
Regards,
Billy Burgoa
El Jueves, 13 de febrero, 2014 7:30 P.M., Jens Havskov
<[email protected]> escribió:
billy
it is hard for any program to always find the correct minimum,
particularly if you have both shallow and deep events in the same data
set. then a single starting depth can be a problem. hyp therefor has the
option to use a range of starting depths to avoid the local minimum,
second last line of STATION0.HYP. i have modified you STATION0.HYP and now
the deph with lowest rms is found. manual p 99 (but not so easy to find!)
jens
On Thu, 13 Feb 2014,
Billy edson Burgoa Rosso wrote:
> Hello Jens,
>
> Yes, I meant hyp (hypocenter).
>
> Regards,
>
> Billy Burgoa
>
>
>
> El Jueves, 13 de febrero, 2014 3:06 P.M., Jens Havskov
> <[email protected]> escribió:
> Billy
>
> do you mean locting with hyp ? we do nto have a program hyp2000
>
> jens
>
> On Wed, 12 Feb 2014, Billy edson Burgoa Rosso wrote:
>
> > Hello SeisAn users,
> >
> > I have a good number of events which I have relocated with hyp2000 and I
> > noticed that some solutions that this locator has obtained are not based
> on
> > the minimum RMS.
> > I selected some events which have high RMS value in order to check the
> > RMS-DEPTH plot and I found out these solutions are not based in the
> minimum
> > RMS. Please find attached an image which presents the rms-depth plot for
> one
> > event. The solution that hyp2000 is taking is based on a local RMS minimum
> > at 30 km depth, nevertheless, the real minimum RMS is about 80 km depth.
> >
> > Could anybody explain me why hyp2000 is using the solution which doesn't
> > agree with the minimum RMS? Is it possible to set or change any parameter
> > for hyp2000?
> >
> > I know it is possible to fix the depth editing the s-file, however, I have
> > lots of events; It could take me a while, if I did one by one.
> >
> > Thanks in advance.
> >
> > Billy Burgoa
> >
> >
> >
>
>
>
>
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan