bruno
you just have to change your def file. the default is now BH Z so you have
to use that as input and then write the output code you want.
jens
On Thu, 15 May 2014, Bruno Faria wrote:
Dear Jens,
Thank you very much for your support.
It works, but the output file name and the header still contain *_BH_*. This
is problem only when using mulplt to determine the amplitude, as the resp
files are not recognized.
But is fine I can change the name of the resp files.
Best regards,
Bruno
----- Original Message -----
From: Jens Havskov
To: Bruno Faria
Cc: [email protected]
Sent: Thursday, May 15, 2014 2:11 PM
Subject: Re: [seisan] gursei.def
bruno
i have changed name to gursei.pro, should fix it
jens
On Thu, 15 May 2014, Bruno Faria wrote:
> Dear Jens,
>
> Thank very much for gursei.exe. Unfortunately my anti-virus took it
away.
>
> I'm sorry to bother you. May I ask you, please, to send it me again
with cc
> to [email protected] (this email account is configured on a Mac
so I
> should not have problems with anti-virus.)
>
> Thank you very much in advance for your attention.
>
> Best regards,
> Bruno
> ----- Original Message -----
> From: Jens Havskov
> To: Bruno Faria
> Sent: Thursday, May 15, 2014 7:44 AM
> Subject: Re: [seisan] gursei.def
>
> bruno
>
> i found no problem with the latest seisan (10.1). maybe you could
try.
> which operating system do you use.
>
> jens
>
> On Tue, 13 May 2014, Bruno Faria wrote:
>
> > Dear Jens,
> >
> > Thank you very much for your assistance.
> >
> > Please find in attachment the record of the three components of
the
> station
> > FGTT and the GURSEI.DEF file.
> >
> > Best regards,
> > Bruno
> >
> > ----- Original Message -----
> > From: Jens Havskov
> > To: Bruno Faria
> > Cc: [email protected]
> > Sent: Tuesday, May 13, 2014 3:33 PM
> > Subject: Re: [seisan] gursei.def
> >
> > bruno
> >
> > there was a small change in 10.0. can you send a def file and an
> input
> > file so we can test.
> >
> > jens
> >
> > On Fri, 9 May 2014, Bruno Faria wrote:
> >
> > > Dear All,
> > >
> > > I installed the last version of SEISAN (10.0) and I tried to use
> the
> > same
> > > gursei.def file as the previous version (9.1) but is not
working.
> > >
> > > Was there any change to this file in the new version ? I didn't
> find
> > any
> > > mention about this issue in the manual.
> > >
> > > Please find the gursei.def that I'm using in attachment.
> > >
> > > I tried it in both OS: WinXP (32 bit) and Fedora 20 (32 bit).
> > >
> > > Thank you very much in advance for your assistance and help.
> > >
> > > Best regards,
> > > Bruno
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan