Dear Jens,

It is perfect! It works.

Thank you very much for your assistance and help.

So it is time to merge to the last version.

Best regards,
Bruno



---- Original Message ----- 
  From: Jens Havskov 
  To: Bruno Faria 
  Cc: [email protected] 
  Sent: Friday, May 16, 2014 5:08 AM
  Subject: Re: [seisan] gursei.def


  bruno

  you just have to change your def file. the default is now BH Z so you have 
  to use that as input and then write the output code you want.

  jens

  On Thu, 15 May 2014, Bruno Faria wrote:

  > Dear Jens,
  > 
  > Thank you very much for your support.
  > 
  > It works, but the output file name and the header still contain *_BH_*. This
  > is problem only when using mulplt to determine the amplitude, as the resp
  > files are not recognized.
  > But is fine I can change the name of the resp files.
  > 
  > Best regards,
  > Bruno
  >
  >       ----- Original Message -----
  > From: Jens Havskov
  > To: Bruno Faria
  > Cc: [email protected]
  > Sent: Thursday, May 15, 2014 2:11 PM
  > Subject: Re: [seisan] gursei.def
  > 
  > 
  > bruno
  > 
  > i have changed name to gursei.pro, should fix it
  > 
  > jens
  > 
  > On Thu, 15 May 2014, Bruno Faria wrote:
  > 
  > > Dear Jens,
  > >
  > > Thank very much for gursei.exe. Unfortunately my anti-virus took it
  > away.
  > >
  > > I'm sorry to bother you. May I ask you, please, to send it me again
  > with cc
  > > to [email protected] (this email account is configured on a Mac
  > so I
  > > should not have problems with anti-virus.)
  > >
  > > Thank you very much in advance for your attention.
  > >
  > > Best regards,
  > > Bruno
  > > ----- Original Message -----
  > > From: Jens Havskov
  > > To: Bruno Faria
  > > Sent: Thursday, May 15, 2014 7:44 AM
  > > Subject: Re: [seisan] gursei.def
  > >
  > > bruno
  > >
  > > i found no problem with the latest seisan (10.1). maybe you could
  > try.
  > > which operating system do you use.
  > >
  > > jens
  > >
  > > On Tue, 13 May 2014, Bruno Faria wrote:
  > >
  > > > Dear Jens,
  > > >
  > > > Thank you very much for your assistance.
  > > >
  > > > Please find in attachment the record of the three components of
  > the
  > > station
  > > > FGTT and the GURSEI.DEF file.
  > > >
  > > > Best regards,
  > > > Bruno
  > > >
  > > > ----- Original Message -----
  > > > From: Jens Havskov
  > > > To: Bruno Faria
  > > > Cc: [email protected]
  > > > Sent: Tuesday, May 13, 2014 3:33 PM
  > > > Subject: Re: [seisan] gursei.def
  > > >
  > > > bruno
  > > >
  > > > there was a small change in 10.0. can you send a def file and an
  > > input
  > > > file so we can test.
  > > >
  > > > jens
  > > >
  > > > On Fri, 9 May 2014, Bruno Faria wrote:
  > > >
  > > > > Dear All,
  > > > >
  > > > > I installed the last version of SEISAN (10.0) and I tried to use
  > > the
  > > > same
  > > > > gursei.def file as the previous version (9.1) but is not
  > working.
  > > > >
  > > > > Was there any change to this file in the new version ? I didn't
  > > find
  > > > any
  > > > > mention about this issue in the manual.
  > > > >
  > > > > Please find the gursei.def that I'm using in attachment.
  > > > >
  > > > > I tried it in both OS: WinXP (32 bit) and Fedora 20 (32 bit).
  > > > >
  > > > > Thank you very much in advance for your assistance and help.
  > > > >
  > > > > Best regards,
  > > > > Bruno
  > > > >
  > > > >
  > > > >
  > > > >
  > > > >
  > > >
  > > >
  > > >
  > >
  > >
  > >
  > 
  > 
  >
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to