Dear Jens. Thank you so much!!! for your prompt response!!!
Best Regards. Gonzalo F 2014-07-24 16:13 GMT-04:00 Jens Havskov <[email protected]>: > gonzalo > > the simplest would be to not use the additionbal filter,it is only there > to avoid unsstability when determining Ml for very small events, say Ml < > 2. use the filter at 9 Hz would also be ok. > > jens > > > > On Thu, 24 Jul 2014, gonzalo antonio fernandez marañon wrote: > > Dear Seisan Gurus. >> Have a wonderful day, I have a question about the Wood Anderson filter to >> calculate the Ml magnitude. >> >> 1. We are getting data from a Broad Band station from another Data Center, >> the sampling rate is 20sps >> >> 2. The WA Filter is set from 1.25 to 20 (I assume it is a Band Pass), of >> course I can modify the valu in MULPLT.DEF >> >> 3. When I tryed to get the Ml magnitude (following the manual procedure) >> with this station I got an error which told that it is not possible filter >> due to the sampling rate, of course it is logical. >> >> 4. So I decided to change the filter range from 1.25 to 9 in MULPLT.DEF, >> then I got no error and I could get the Ml magnitude. >> >> As the Broad Band station has 20sps the maximun frquency work is 10 rigth >> (due to the sampling theorem) that is the reason I put 1.25 to 9 for a WA >> filter. >> >> The question are: >> >> Does anyone think (I accept all comentaries) that the Ml magnitude for a >> local earthquake can be used? >> >> Is the filter range logical? >> >> Thank you for your time. >> >> Best Regards. >> >> Gonzalo F >> >> >>
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
