I'm quite new to James myself, and most of my previous work has been
with postfix, but perhaps I can answer some of your questions.
On 4/21/07, Johnny Kewl <[EMAIL PROTECTED]> wrote:
I'd like to play with James and all I have is a DSL connection...
When I look at the DSL router docs it says it can forward pop and smtp servers
This means, that your router can port forward ports 25 (smtp) and port
(110) pop to a server behind your firewall/router - a server located
within your lan. I.e. If you have a server within your network running
James (or other mail server) on an IP address (for example)
192.168.20.10 then you can configure your router to port forward port
25 (on the router) to port 25 (on the server) meaning that all the
connections which come in to your router on these ports will
automatically be sent to your server at 192.168.20.10. Same applies
for port 110
In the quick start... it says set the DNS Report field to the domain name.
My system reports the DSL as the DNS...
Am I right in assuming all the DSL pop and smtp configurations really do is
provide a path to the service provider DNS.
Your router probably forwards any DNS requests it received onto the
DNS server of your ISP. To the machines behind the firewall, it
appears that the DNS is the address of your router.
I've got one of my test systems set up in a similar configuration, and
the dnsserver sectuib if SAR-INF/config.xml file looks like:
<dnsserver>
<servers>
<server>192.168.90.5</server>
<server>192.168.90.1</server>
</servers>
<autodiscover>true</autodiscover>
<authoritative>false</authoritative>
<maxcachesize>50000</maxcachesize>
</dnsserver>
I have two DNS servers on this network, one of them uses the router
which gets the DNS info from the DNS server provided by my ISP.
So what do I need to do... if I have to phone my SP, I dont want to sound like
a complete idiot... ha ha
Some ISP (in Australia) tend to block ports below 1024. However you
can often request for this block to be removed. This does not however
apply to all ISPs, the simplest thing to do is once you are set up and
have something listening on port 25 is to use a machine external to
your network to telnet back to the IP address of your router on port
25. I.e if the ISP assigned your router an IP address of:
203.123.123.245 then a simple test is: telnet 203.123.123.245 25 (with
25 being the port your are testing) and if you get a connection then
your server is up and running.
More questions...
Say I did have a leased line with my own DNS... is there no permission
required, if the DNS is set would James just cooperate with other mail servers?
Not really sure what a "leased line" is, but in my configuration I
have no problem in James connecting to other mail servers and
delivering email, as long as it can resolve a domain name to an IP
address.
I do run a dynamic DNS in the DSL router... so I do have an domain name, but a
varying ip adress...
So I guess my question is how does one setup a mail server behind a DSL
router... but I'm also trying to understand if permission is required from SP's
before anything will work??
As per my config again, once the mail server is set up, then you can
simply forward all relevant ports to the IP address of your server
behind your router.
Thanks
Oh... another question... these mailing lists, they fantastic and I was
wondering if James is the doing all this?
Hope this was of some help.
Gary
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
