I thought this might be a firewall problem so I tried a stun server with
the following result:
Calling "sip:[email protected]" with account "Account:1339502016" .
callId : "1506064333" ConfId: ""
Calling action 0 on call with state 3 . Become 3
Call State Changed for call "1506064333" . New state : "FAILURE"
Call found Call(0x5c40c20)
Warning : call "1506064333" had an unexpected transition of state.
Calling stateChanged "FAILURE" -> 5 on call with state 3 . Become 5
Hanging up call. callId : "1506064333" ConfId: ""
Calling action 1 on call with state 5 . Become 5
Call State Changed for call "1506064333" . New state : "HUNGUP"
Call found Call(0x5c40c20)
Stoping call. callId : "1506064333" ConfId: ""
Calling stateChanged "HUNGUP" -> 4 on call with state 5 . Become 9
Does anyone have a stun server working?
Cheers
Andrew
On 26/06/12 13:43, Andrew Myers wrote:
Did you get this sorted in the end.
I seem to have hit the same problem
Cheers
Andrew/
/
On 17/06/12 22:32, Felipe De la Puente Christen wrote:
Hi Andrew,
Thanks for the help. I checked with pavucontrol, and the audio
channel is the same in both ringtone and conversation stages of the
call. So basically the audio settings are the same.
I'm thinking this could be something regarding codec selection
critetria by the IP Phone clients, or may be something similar to the
NAT traversal issue I have seen with the Cisco 7912 SIP firmware
phones. But the SFLPhone client is directly connected to a mobile
broadband network.
I just tested Empathy to Empathy calls and they work ok. Then tried
Cisco 7912/SIP to Empathy and it also works great. But Empathy to
Cisco 7912/SIP works only one way (the effect is just the same as
calling from SFLPhone to Empathy or Cisco)
Any other thoughts?
Thanks in advance!
Regards, Felipe.
On Sun, 2012-06-17 at 08:46 +0200, Andrew Myers wrote:
First thing I would check is the volume controls for Pulseaudio
As I understand it SFLPhone understands Pulsaudio, which means that
there are separate streams for ringtone and the calls.
Load up pavucontrol and leave it open on the desktop in the playback tab
Establish a call with one of th echo test sites
(sip:[email protected] <mailto:sip:[email protected]>)
Check the volumes on the playback and recording tabs.
Hope this helps
Andrew
On 16/06/12 23:18, Felipe De la Puente Christen wrote:
Hi,
I have installed the latest nightly of sflphone-client-gnome on an
ubuntu 12.04 amd64 samsung X420 laptop.
When I call other SIP phones, the sound works only one way. In
particular, the sflphone user can't listen to its interlocutor. The
other SFLPhone sounds work ok (ringtone, key tones). The sound is
set to use pulse audio. In the same machine, other clients such as
Empathy can establish two way audio conversations without problems.
Any clues about what is this happening?
Thanks in advance.
Regards, Felipe.
--
Felipe De la Puente Christen
_______________________________________________
SFLphone mailing list
[email protected]
<mailto:[email protected]>
http://lists.savoirfairelinux.net/mailman/listinfo/sflphone
--
Felipe De la Puente Christen
_______________________________________________
SFLphone mailing list
[email protected]
http://lists.savoirfairelinux.net/mailman/listinfo/sflphone
_______________________________________________
SFLphone mailing list
[email protected]
http://lists.savoirfairelinux.net/mailman/listinfo/sflphone
