Hi, I haven't solved it yet. I tried to use stun server but if I recall clear it didn't work (I think I got errors during SIP registering).
I haven't tested it deeper yet, mostly because my own machine is running ubuntu 10.04 and I think sflphone dependencies aren't met there. Thanks, Felipe. On Tue, Jun 26, 2012 at 8:17 AM, Andrew Myers <[email protected] > wrote: > I thought this might be a firewall problem so I tried a stun server with > the following result: > > Calling "sip:[email protected]" <sip:[email protected]> with account > "Account:1339502016" . callId : "1506064333" ConfId: "" > Calling action 0 on call with state 3 . Become 3 > Call State Changed for call "1506064333" . New state : "FAILURE" > Call found Call(0x5c40c20) > Warning : call "1506064333" had an unexpected transition of state. > Calling stateChanged "FAILURE" -> 5 on call with state 3 . Become 5 > Hanging up call. callId : "1506064333" ConfId: "" > Calling action 1 on call with state 5 . Become 5 > Call State Changed for call "1506064333" . New state : "HUNGUP" > Call found Call(0x5c40c20) > Stoping call. callId : "1506064333" ConfId: "" > Calling stateChanged "HUNGUP" -> 4 on call with state 5 . Become 9 > > Does anyone have a stun server working? > > Cheers > > Andrew > > On 26/06/12 13:43, Andrew Myers wrote: > > Did you get this sorted in the end. > > I seem to have hit the same problem > > Cheers > > Andrew* > * > On 17/06/12 22:32, Felipe De la Puente Christen wrote: > > Hi Andrew, > > Thanks for the help. I checked with pavucontrol, and the audio channel is > the same in both ringtone and conversation stages of the call. So basically > the audio settings are the same. > > I'm thinking this could be something regarding codec selection critetria > by the IP Phone clients, or may be something similar to the NAT traversal > issue I have seen with the Cisco 7912 SIP firmware phones. But the SFLPhone > client is directly connected to a mobile broadband network. > > I just tested Empathy to Empathy calls and they work ok. Then tried Cisco > 7912/SIP to Empathy and it also works great. But Empathy to Cisco 7912/SIP > works only one way (the effect is just the same as calling from SFLPhone to > Empathy or Cisco) > > Any other thoughts? > > Thanks in advance! > > Regards, Felipe. > > On Sun, 2012-06-17 at 08:46 +0200, Andrew Myers wrote: > > First thing I would check is the volume controls for Pulseaudio > > As I understand it SFLPhone understands Pulsaudio, which means that there > are separate streams for ringtone and the calls. > > Load up pavucontrol and leave it open on the desktop in the playback tab > > Establish a call with one of th echo test sites (sip:[email protected]) > > Check the volumes on the playback and recording tabs. > > Hope this helps > > Andrew > > > On 16/06/12 23:18, Felipe De la Puente Christen wrote: > > Hi, > > I have installed the latest nightly of sflphone-client-gnome on an ubuntu > 12.04 amd64 samsung X420 laptop. > > When I call other SIP phones, the sound works only one way. In particular, > the sflphone user can't listen to its interlocutor. The other SFLPhone > sounds work ok (ringtone, key tones). The sound is set to use pulse audio. > In the same machine, other clients such as Empathy can establish two way > audio conversations without problems. > > Any clues about what is this happening? > > Thanks in advance. > > Regards, Felipe. > > -- > Felipe De la Puente Christen > > > > > _______________________________________________ > SFLphone mailing > [email protected]http://lists.savoirfairelinux.net/mailman/listinfo/sflphone > > > > > -- > Felipe De la Puente Christen > > > > > > > _______________________________________________ > SFLphone mailing > [email protected]http://lists.savoirfairelinux.net/mailman/listinfo/sflphone > > > >
_______________________________________________ SFLphone mailing list [email protected] http://lists.savoirfairelinux.net/mailman/listinfo/sflphone
