The 530 cards can be a real pain to set up but the *should* be PnP so you should not need to enter any baseaddr. same goes for the 3c905 cards, If you could you should use the 905�s cause the are plain better performers
// GNU ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, January 26, 2002 9:41 PM Subject: [STN] Set up help - I'm dyin' here > I've been trying for several days to set up an STN box to no avail. > I've tried several diferent computers. I've got a whole box of NICS > I've been going through. I finally went out and bought two new D-Link > DEF-530TX+ NICS, can't get them to work. I'm sure I'm just not smart > enough to set something up right, but I'm not sure what. > > I run the D-Link diagnostic and it tells me the card base I/O addresses > are 6000H and 6100H, so I put 0x6000 and 0x6100 in the base address > location on the build program. The first thing I see is the errors > SIOCSIFADDR: Device not found, followed by SIOCSIFBRADDR and > SIOCSIFNETMASK and similar entries. I get eth0 not found errors. > > I need a box to provide DHCP and basic firewall for a small network of > about eight or so workstations. This particular one is going between an > old ISDN router that dials ISDN, but not much else, so I need to work it > with two NICs. > > I've also got a whole bag of 3Com 3C905-TX NICs I can't seem to get to > work either. > > I see all the comments on what a snap STN is to set up, so I must be > really stupid here to have so many problmes. Any help is greatly > appreciated. > > Michael > > ============================================================ > YOU SPEND TOO MUCH ON MONITORS MonitorsDirect saves I.T. > managers money by skipping two middlemen. >>> Click here > to learn more, and get the free Monitor Field Guide. > http://click.topica.com/caaafJvbz8Rp2bAfyG7f/MonitorsDirect > ============================================================ > > -- > Visit http://www.ShareTheNet.com for info about ShareTheNet > Visit http://www.topica.com/lists/sharethenet for info about this list > To Unsubscribe send email to: [EMAIL PROTECTED] > > ===================================================== Don't miss a programming beat! Sign up now for developerWorks weekly newsletter - tools, code, and tutorials - Java, XML, Linux, Open Source, - everything you need. http://click.topica.com/caaafmtbz8Rp2bAfyICf/developerWorks ===================================================== -- Visit http://www.ShareTheNet.com for info about ShareTheNet Visit http://www.topica.com/lists/sharethenet for info about this list To Unsubscribe send email to: [EMAIL PROTECTED] ==^================================================================ This email was sent to: [email protected] EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Rp2.bAfyIC Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
