I think I got the 58mm. I'll have to check. ----- Original Message ----- From: Marc Medina To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Saturday, July 16, 2005 12:54 PM Subject: Re: SD> throttle body upgrade
I got mine from a 3.0 Caravan. FYI, it will bolt on to a 2 pc intake without machining the inlet. Obviously it won't flow well, but it will bolt on and run. If you don't have an intercooler, you'll need to convert. The larger throttle body is too big for the T1 pressure hose. If you need to get the hole on your intake bored out, I've got a 2" (52 mm) bit for a bridgeport. I paid like $10 for it on e-bay, so I'd sell it for that. Marc www.marcmedina.com From: "Ed Nickl" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Subject: Re: SD> throttle body upgrade Date: Sat, 16 Jul 2005 08:09:49 -0400 The 3.3 and 3.8s are very similar. They are either 52 ot 58mm. I got one for $25 fro the local pick and pull. I think it was from a 3.8 caravan. I have read that the dynasty/new yorkers can work also. There are upgrades for the blow through intakes, not the original suck through log style. You will also need to enlarge the opening in the intake to accept the throttle butterfly. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 16, 2005 12:22 AM Subject: SD> throttle body upgrade -----------------------REMOVE-FOOTER-WHEN-REPLYING---------------------------- Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
